Sony XC229S User manual

SERVICE MANUAL
1/3” SONY DSP COLOR CCD CAMERA
O.S.D. (ON SCREEN DISPLAY) SERIES
V.22_S_R
The serial number of this product may be found
on the bottom of the unit.
You should note the serial number of this unit in
the space provided and retain this instruction as a
permanent record of your purchase to aid
identification in the event of theft.
Model No.
SerialNo.

▲Before attempting to connect this product, please read and keep this
manual for future use.
Safety Warning
1. Do not open the cover, it may cause electric shock.
Ask a qualified service person for maintenance when you encounter
any problems.
2. Installed the camera away from TV, radio transmitter, magnet, electric
motor, transformer, audio speakers because the magnetic fields
generate from above devices will distort the video image.
3. Place this camera on a solid base. Installed the camera away from
stoves, or other heat generating devices as the high temperature could
cause deformation, discoloration or other damages of the camera.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is interned to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
1

Install the camera at where the temperature range will stay between 0℃
to 50℃(32℉to 122℉)
4. Do not expose and operate the camera in the rain and humid areas.
5. Only use soft dry cloth to clean the camera. Also use lens tissue or
cotton tipped applicator and ethanol to clean CCD sensor and camera
lens.
6. When the camera is not in use, put the cover cap on the lens mount.
Please do not touch the surface of CCD by bare hand.
Introduction
This Full Function series CCD cameras introduce a new level of high
picture quality through the digital signal processing LSI’s technology for
advanced video surveillance. It provides most reliable and accurate color
picture in security industries.
Main Features
z540TV Lines Ultra High Resolution.
zHigh Sensitivity: SONY 1/3” Super HAD CCD image sensor.
zO.S.D. (On Screen Display): Controlled by selecting menu displayed
on the monitor screen.
zD.N.R. (Digital Noise Reduction).
zDay & Night Mode: Automatically switch.
zPowerful Functions: DC/Video drive lens, B.L.C., Flickerless, White
Balance control, Mirror, Motion Detection, Sens-Up, Sharpness,
Privacy, Camera ID.
zBuilt-in anti-aliasing and IR-cut optical filter.
2

Installation Instructions
(1) Remove the cap from the lens mount.
(2) Select the C mount lens (with mount ring) or CS mount lens.
(3) Screw and fasten the lens into the lens mount.
(4) Connect the video output wire between monitor and camera through
75ohm type coaxial cable.
(5) Connect the power cord input.
(6) When monitor shows the picture, please adjust the focus and iris of the
Lens to obtain the best image according to the following procedures:
zChoose the objects at a distance about 5 ~ 10 meter away.
zLoosen the mount lens fixing screw (use L wrench), if necessary.
zTurn the lens and the mount together until image is clear.
zScrew the mount to camera.
(7) Fix camera to the bracket, if necessary.
Rear Panel Switches (DC12V, optional AC type)
3
4
AC90
~
260V
AC
24V
DC12V/AC24V

5
MENU
SET UP MENU
LENS * Manual * DC/VIDEO
SHUTTER & SPEED * ESC * MANUAL * FLK
WHITE BALANCE * ATW * AWC * MANUAL
* OFF * LOW * MIDDLE
B.L.C. (BACK LIGHT
COMPENSATION) * HIGH
* OFF * LOW * MIDDLE
AGC (AUTO GAIN
CONTROL) * HIGH
* OFF * LOW * MIDDLE
D.N.R. (DIGITAL
NOISE REDUCTION) * HIGH
SENS-UP (LOW LUX) * OFF * AUTO
* CAMERA ID * COLOR
* SYNC * MOTION DETECTION
* PRIVACY * MIRROR
* SHARPNESS * RESET
SPECIAL
* RETURN
EXIT

MENU On Screen
IRIS Level Control
DC Drive Video Drive
Pin 1 Drive - Volt +
Pin 2 Drive + N.C
Pin 3 Damp + IRIS
Pin 4 Damp - GND
6

SPECIFICATIONS
MODEL XC229S (ULTRA H.R.)
PICK-UP DEVICE Sony 1/3" IT Super HAD High Resolution CCD Image Sensor
SIGNAL PROCESSOR Digital Signal Processor (D.S.P.)
SYNC. SYSTEM Internal / Line Lock (L.L.)
RESOLUTION 540 TV Lines
MIN. ILLUMINATION 0.1Lux / F1.2, 0.001Lux (Sens-Up)
S/N RATIO More Than 50 dB
POWER SUPPLY DC12V; AC24V; AC90~260V;
DC12V/AC24V Dual Power
GAMMA CORRECTION 0.45
CONTROL OSD
WHITE BALANCE ATW (1,800° K~10,500° K)
LENS MOUNT C / CS Mount
AUTO IRIS CONTROL Video Drive lens & DC Drive lens both supported
BASIC FUNCTION
Lens Selection (DC / VIDEO / Manual)
Shutter Selection (ESC / Manual / FLK)
ATW / AWC / Manual Selection
BLC (Off / Low / Middle / High) Selection
AGC (Off / Low / Middle / High) Selection
DNR (Off / Low / Middle / High) Selection
Sens-Up (Off /AUTO: 2X ~ 128X) Selection
ADDED FUNCTION
Camera ID ON / OFF
Motion Detection ON / OFF (4 Zone, Position / Size / Sensitivity)
Privacy Zone ON / OFF (4 Zone, Position / Size / Tone)
Mirror ON / OFF
Sharpness ON / OFF
Reset Function
DAY & NIGHT (Electronic Conversion)
Watch Dog
VIDEO OUTPUT 1 Vp-p Composite Video / 75 ohm Load
POWER
CONSUMPTION 3.5W (MAX.)
OPERATING TEMP. -10°C to 50°C (14°F to 122°F)