© 2021 Sony Corporation Printed in Malaysia
3Set up the remote control
4Turn on the TV and the speaker system
PLEASE WAIT TV
AC power cord (mains lead) (supplied)
AC power cord
(mains lead)
Power ON
HELLO
AC power cord (mains lead) (supplied)
Connect the TV’s AC power cord (mains lead) to the AC outlet (mains).
Connect the AC power cord (mains lead) to the AC inlet on the bar speaker.
Connect the AC power cord (mains lead) to the AC outlet (mains).
The remote control of the speaker system does not work until [HELLO] in the front panel display on the speaker system disappears.
Press (power) on the remote control of the speaker system.
When the speaker system turns on, [TV] appears in the front panel display.
5Perform Initial Settings
Initial Settings screen
HOME
////
Press HOME to start Initial Settings.
Press ///and to select an item by following the on-screen instructions.
Once [Setup is complete.] appears, select [Finish].
6Listen to sound
TV
HDMI1
HDMI2
TV input switch
To listen to the audio of the TV
Select the desired input to the TV using the TV remote control.
The screen switches to the selected input screen and the TV audio is output from the
speaker system.
If [TV] does not appear in the front panel display on the speaker system, press TV on the
remote control of the speaker system to select the TV input. [TV] appears in the front
panel display on the speaker system.
To listen to the audio of a device that is connected to the HDMI IN jack
on the speaker system
Turn on the connected device. Then use the TV’s remote control to switch the
TV’s input to the HDMI IN jack to which the speaker system is connected.
Press HDMI1 or HDMI2 on the remote control of the speaker system to switch
to the HDMI input.
[HDMI1] or [HDMI2] appears in the front panel display on the speaker system and the
audio of the connected device is output from the speaker system.
Note
• Depending on the order in which you turn on the TV and speaker system, the speaker system may be muted and [MUTING] may appear on the front panel display on the speaker system. If this happens, turn on the
TV first, then the speaker system.
• If you select “YES” in “2 Connect a TV and another device,” enable the Control for HDMI function on the TV. Otherwise, there will be no TV sound output from the speaker system.
How to use the speaker system / Troubleshooting
Sound Bar
Operating Instructions (booklet)
Describes basic usage such as installation/connection
and playback of connected devices.
Help Guide (Web instruction manual)
Describes all the usage such as the network function
and the detailed setting method, including the contents
of the Operating Instructions.
For troubleshooting when the speaker system does not
operate correctly, see “Troubleshooting” in the Operating
Instructions or Help Guide.
For customers in Americas
https://rd1.sony.net/help/ht/
a7000/h_uc/
For customers in other countries/
regions
https://rd1.sony.net/help/ht/
a7000/h_zz/
