
Montage
1Tournez la monture (A) à l’extrémité supérieure du tube
support, en vérifiant que la vis sur la monture est bien à
l’arrière du tube support quand vous cesser de tourner. Puis,
serrez la vis pour immobiliser la monture.
2Ajustez l’orientation du tube support par rapport à la base et
serrez l’écrou au bas du tube support avec une clé. Faites
ensuite passer le cordon d’enceinte dans le trou sous la base
et ressortir par le trou de la monture.
3Fixez solidement l’enceinte à la monture avec les vis (B).
4Utilisez des vis à bois en vente dans le commerce pour fixer
solidement chaque support d’enceinte au socle du téléviseur
ou à tout autre socle.
1
2
v
3
A
C
B
Assembly
1Rotate the mount (A) on the top of the pipe stand, making
sure the screw on the mount faces the back of the pipe stand
when you stop.Then tighten the screw to secure the mount.
2Adjust the orientation of the pipe stand with respect to the
base and tighten the nut at the bottom of the pipe stand
with the wrench, then pass the speaker cord into the hole
under the base and out from the hole in the mount.
3Tightly secure the speaker to the mount with the screws
(B).
4Use commercially available wood screws to tightly attach
each speaker stand securely to theTV stand or whatever
support is being used.
4
5