Sony Bravia XBR-65X950B User manual

SONY.
Television
T919viseur
BRA
VIA
Operating
Instructions
(Setup
Guide)
Mode
d'emploi
(Guide
d'installation)
us
FR
Sony
Customer
Support
U.S.A.:
http://www.sony.com/tvsupport
Canada:
http://www.sony.ca/support
United States
Canada
1.800.222.SONY 1.877.899.SONY
Please Do Not Return
the Product to the Store
Service
a
Ia
clientele
Sony
Canada:
http://support.sony.ca/fr
Etats-Unis :
http:I
/www.sony.com/tvsupport
Canada
Etats-Unis
1.877.899.SONY 1.800.222.SONY
Ne retournez pas
le
produit au magasin

Owner's Record
The model and serial numbers
are located at the side and rear of
the
TV. Record these numbers in
the spaces provided below. Refer
to them whenever you call upon
your Sony dealer
regarding this
TV.
Model Name
Serial No.
CAUTION
To prevent electric shock and blade
exposure, do not use this AC plug
with an extension cord. receptacle or
other outlet unless the
blades can be
fully inserted
•
Operate the TV only on 110-240 V
AC
(U.S.A/Canada 120 V AC)
• Some
people may experience
discomfort (such as eye strain,
fatigue, or nausea) while
watching
3D video images or playing
stereoscopic 3D games. Sony
recommends that all viewers take
regular breaks while
watching 3D
video images or playing
stereoscopic 3D games. The length
and
frequency of necessary breaks
will vary from person to person. You
must decide what works best. If you
experience any discomfort, you
should stop
watching the 30 video
images or playing stereoscopic 3D
games until the discomfort ends;
consult a doctor if you believe
necessary. You should also review
(i) the instruction manual of any
other
device or media used with
this television and (ii) our website
(http://www.sony.com/tvsupport) for
the latest information. The vision of
young children (especially those
under six years old) is still under
development. Consult your doctor
(such as a pediatrician or eye
doctor) before allowing young
children to watch 3D video images
or play stereoscopic 3D games.
Adults should supervise
young
children to ensure they follow the
recommendations listed above.
• Do not use, store. or leave the
30
Glasses or battery near a fire, or in
places with a high temperature,
e.g.,
in direct sunlight. or in sun-
heated cars.
• When
us1ng the s1mulated 30
function, please note that the
displayed image is modified from
the original
due to the conversion
done by this television.
Licensing Information
The terms HDMI and HDMI High-
Definition Multimedia Interface.
and
the HDMI Logo are trademarks or
registered trademarks of HDMI
Licens1ng LLC
in the United States
and other countries.
Fergason Patent Properties, LLC:
US Patent No 5.717.422
U.S. Patent No. 6.816.141
Manufactured under license from
Dolby Laboratories. Dolby and the
double-D symbol are trademarks of
Dolby Laboratories
"BRAVIA" and
BRAVIA, S-Force,
Motionflow, BRAVIA Sync, and
l!iJ are
trademarks or registered marks of
Sony Corporation.
DLNA®, the DLNA Logo and
DLNA
CERTIFIED(") are trademarks. serv1ce
marks. or certification marks of the
Dig1tal Living Network Alliance.
TrackiD is a trademark or registered
trademark of Sony Mobile
Communications AB.
Gracenote,
Gracenote eyeO.
Gracenote VideoiD. Gracenote Video
Explore. Gracenote MusiciD, the
Gracenote logo and logotype, and
the "Powered
by Gracenote" logo are
either registered trademarks or
trademarks of Gracenote in the
United States
and/or other countries.
Operac~! Devices SDK from Opera
Software ASA. Copyright 1995-2014
Opera Software ASA. All rights
reserved.
Wi-Fi, Wi-Fi Direct and Miracast are
trademarks or registered trademarks
of Wi-Fi Alliance.
"Sony Entertainment Network logo"
and "Sony Entertainment Network"
are trademarks of Sony Corporation.
MHL. Mob1le High-Definition Link
and
the MHL Logo are trademarks or
registered trademarks of
MHL
Licensing. LLC
For DTS patents, see
http
//patents. dts.com. Manufactured
under license from DTS Licensing
Lim1ted. DTS. the Symbol, &DTS and
the Symbo! together are reg1stered
trademarks. and DTS Digital
Surround
is a trademark of DTS. Inc.
© DTS, Inc. All Rights Reserved.
Designed with UEI Technology™
Under License from Universal
Electronics Inc.
Portions© UEI 2000-
2013
The Bluetooth® word mark and logos
are
owned by the Bluetooth SIG, Inc.
and any use of such marks
by Sony
Corporation
is under license. Other
trademarks and trade names are
those of their respective owners.
The N Mark
is a trademark or
registered
trademark of NFC Forum,
Inc.
in the United States and in other
countries.
HIGH-DEFINITION TELEVISION
Hi:lrniTM
HIGH DEFINITION MULTIMEDIA INTERFACE
0 gracenote.

O
OPERA
'M
software
~MHL
..
Mobile
High-i:Jefinition
Link
~d-~
Digital
Surround
0
Bluetooth®
The 55 class has a 54.6 inch
viewable image size and the 65
class has a 64.5 inch viewable
image size (measured diagonally).
Location of the
identification label
Labels for the Model No
.,
Power
Supply rating (in
accordance
with
applicable safety regulation) and
Manufacturing date are located
on
the rear of the
TV
.
(b
• The illustrations of the remote
control used
in
this manual are of
the RMF-YD003 (Touchpad Remote
Control) and RM-YD102
(IR
(infrared) Remote Control) unless
otherwise stated.
• The illustrations used
in
this manual
may differ depending
on
your
TV
model.
• Retain this manual for future
reference.

The BRAVIA® 4K
TV
Experience
Thank you for choosing Sony! Your new
BRA
VIA®
TV
opens the door to the "4K
TV
Experience". This
document
will help you
get the most out of your
TV.
Please take a moment to register your
TV
at:
U.S.A.: http://productregistration.sony.com
Canada: http://www.sony.ca/registration
Four Steps to a 4K TV Experience
Set, Source, Sound, and Setup.
1
Set
Now that you have made the best selection
in
LED backlit LCD
TV
technology, be sure
to remove all accessory contents from the
packaging
before setting up your
TV.
2 Source
To experience the stunning detail of your
BRAVIA
TV,
you need
access
to
High-Definition programming.
•
Upgrade
your signal or content source to
high-definition (4K) by contacting your
HD service provider.
• Bring the astonishing resolution of your
Sony 4K Ultra HD
TV
to life with Sony 4K
Ultra HD
Media
Player. (The availability
depends
on region)
• Receive over-the-air HD broadcasts with
an HD-quality antenna connected
directly to the
back
of your
TV.
Visit
http://www.antennaweb.org
for
more information on antenna selection
and setup.
• Discover the wealth of entertainment now
available on super-high resolution
Blu-ray Disc
TM
player and other Sony HD
equipment.
3
Sound
Complete the high-definition experience
with a
BRAVIA
Sync™ surround sound
system or A/V receiver from Sony.
4
Setup
Install your
TV
and
connect
your sources.
See
page
14 for sample connection
diagrams. To help assure the highest
quality for your 4K experience, use Sony
HDMI (High-Definition Multimedia
Interface) cables.
To learn more about 4K TV, visit:
U.S.A.: http://www.sony.com/HDTV
Canada: http://www.sony.ca/hdtv
This
TV
displays all video input signals
in
a resolution of 3,840 dots
x
2,160 lines.
The following chart shows the high-definition (HD) and standard-definition (SO) video formats
supported by your
BRAVIA
TV
inputs.
4K
I
HD
INPUT
HOM
I
VIDEO AUDIO
0
@0
SUPPORTED FORMATS
4K*
1
108
0/2
4p
/ 1
080p
*
1 1
080i
72
0/
24p
/ 720p*
1 480p 480i
PC*
2
30
p
30
p
t/t/t/t/t/t/
t/t/
*
1
For details of supported formats, refer to the "Specifications"
in
this manual.
*
2 For supported
PC
formats refer to the i-Manual.

5 us

About this manual (Operating Instructions)
sus
This manual explains how to setup your
TV.
For more
information on how to use your BRAVIA
TV,
refer to the
"Electronic manual".
Operating
lnstrQCtiPAS
Explains how to setup your
TV
such as connections,
initial setup, and basic operations.
For more information,
see the i-Manual
Explains how to use all the features. See
page
31
on
how to use the i-Manual.
------..
't
----~
--
.....
u-
-------
-------
-
---
~.
.,.
L
..
~
-
-
-
-~
l
Images and illustrations used
in
this manual may differ from
the actual screen.

Table of Contents
Checking
the accessories........................................................................8
Inserting batteries into the remote control................................................8
l!iJ
Before setting
up
your
TV
..........................................:
..............................9
1:
Attaching
the Table-Top Stand ..........................................................10
2:
Connecting
the
TV
..............................................................................14
3:
Securing the
TV
..................................................................................20
4:
Bundling
the
cables
...........................................................................22
5:
Connecting
the
TV
to the Internet.......................................................23
6:
Running initial setup ...........................................................................24
Watching
TV
...........................................................................................25
Using the remote control ........................................................................26
Discovering the contents you like (Discover).........................................28
Enjoying social networking while
watching
TV
(Social Viewing) ............28
Selecting various contents and tools (Home Menu) ..............................29
Looking for instructions
in
the
electronic manual (i-Manual)
~
...G
Troubleshooting......................................................................................34
How
to care for your BRAVIA
TV
............................................................36
Specifications.........................................................................................37
Installing the
TV
to the Wall ..............
..
..............................
..
....................39
Installing the
TV
against a wall or
enclosed
area...................................
41
Safety Information..................
..
....................
..
.........................................42

Checking the
accessories
IR
Remote
Control
(1
)*
Touch
pad
Remote
Control
(1
)*
Size
AAA
batteries
(
4)
AC
power
cord
(1)
(XBR-65X950B only)
Cable
clamper
(3)
Cable
holder
(1)
(XBR-65X950B only)
Table-
Top
Stand
(2)
Fixing
screws
for
Table-Top
Stand
(MS
X
16) (4)
Wall-Mount
Attachment
(M6)
(long)
(2)
(XBR-65/55X900B only)
Wall-Mount
Attachment
(MS)
(short)
(2)
(XBR-65/55X900B only)
Active
30
Glasses
(battery
included)
(2)
IR
Blaster
(1)
Camera
cover
(1)
(XBR-65/55X900B only)
Operating
Instructions
(this
manual)
and
other
documents
Port
Replicator
accessories
(set)
*
Refer to the model name printed on the remote
control.
sus
Inserting batteries
into
the remote
control
Touchpad Remote Control
1 Remove the protection sheet.
2 Press the latch and lift the cover to open.
IR
Remote Control
1 Remove the protection sheet.
2 Push and slide the cover to open.

• Guidelines for IR Remote Control
• Point your remote control directly at the
IR
sensor located on your
TV.
• Make sure that no objects are blocking
the path between the remote control and
the
IR
sensor on your
TV.
[
~
'
,,
• Fluorescent lamps can interfere with your
remote control; try turning off the
fluorescent lamps.
•
If
you are having problems with the
remote control, reinsert or replace your
batteries and make sure that they are
correctly inserted.
Before setting up
your TV
Some
TV
models are
packaged
with a
detached
Table-Top Stand so you can
mount your
TV
to a wall right away. See
page
39 (Installing the
TV
to the Wall) if you
want to mount the
TV
to a wall.
If
you are not
mounting the
TV
to a wall, you will need to
attach the Table-Top Stand.
You
will need a
Phillips screwdriver (not supplied) and the
supplied screws to complete the task. Look
for the supplied Table-Top Stand instruction
leaflet.
Be sure to consider the following while
setting up your
TV:
• Disconnect all cables when carrying the
TV.
• Carry the
TV
with the adequate number
of people; larger size TVs require two or
more people.
• Correct hand placement while carrying
the
TV
is
very important for safety and to
avoid damage.
XBR-65/55X900B
• Ensure your
TV
has adequate ventilation,
see
page
41.
(Continued) 9
us

• For best picture quality,
do
not expose
the screen to direct illumination or
sunlight.
• Avoid installing the
TV
in
a room with
reflective wall and floor materials.
• Avoid moving the
TV
from a cold area to
a warm area. Sudden room temperature
changes may cause moisture
condensation. This may cause the
TV
to
show poor picture and/or poor color.
Should this occur, allow moisture to
evaporate completely before powering
the
TV
on.
• Ensure that there are no objects
in
front
of the
TV.
,......--~
30
Sync
~=-=-~=1~==~l
Transmitter
T
IR
Sensor
10
us
1: Attaching the
Table-
Top
Stand
• Recommended (edge position)
Refer to the supplied Table-Top Stand
leaflet for proper attachment.
.b
• Do not put stress on the LCD panel or the
frame around the screen.
• Be careful to not pinch your hands or the AC
power
cord
when you install the
TV
set to the
Table-Top Stand.
• Two or more
people
are needed to carry out
this installation.
XBR-65X950B
1
Remove the cushion of the right side
CD,
and attach the Table-Top Stand to the
TV
®.
2 Repeat step 1 for the left side.

3
Fix the
TV
to the Table-Top Stand using
the supplied screws. The arrow marks
~
indicate the location of the screw
holes used for securing the Table-Top
Stand.
XBR-65/55X900B
1
Remove the cushion of the right side
CD,
and attach the Table-Top Stand to the
TV
®.
2 Repeat step 1 for the left side.
3 Fix the
TV
to the Table-Top Stand using
the supplied screws. The arrow marks
~
indicate the location of the screw
holes used for securing the Table-Top
Stand.
(bJ
•
If
using an electric screwdriver, set the
torque
at
approximately
1.5 N·m
{15 kgf.cm}.
(Continued)
11
us

~
Alternative (middl
thou
can change
th
T
e position)
e
edge
t h e able-To
s
to the
instr~~/
middle
positio~
btand from
Ions below. Yreferring
XBR-65/55X900B
XBR-65X9508
Middle position
1
1
2
2

To
detach
the
Table T
remove the
screws
+
op
Stand from the
TV,
XBR-65X950B
XBR-65/55X900B
~
•
Do
not
remove
the
Table
reason other than to
inst~J
op Stand for any
• accessories
on
the
TV.
corresponding
Be
sure
the
TV
is v
t'
To
avoid uneven
p~t~~:l
be;ore turning
on.
power
on
the
TV
with
th
~~Dormlty
do
not
down. e panel facing
•
When
attaching
the
Tabl
be sure to fasten
th
e-Top Stand again
removed)
to
the o .e screws (previously ,
the
TV.
nglnal holes
on
the rear of
If.
you
do
not
wish
t
hide it as illustratedo use the camera,
XBR-65X950B
XBR-65/55X900B
Camera
cover
J~

2:
Connecting the TV
p
• Use
an
antenna cable
connector
no greater
than 14 mm thick.
• When connecting the
cable
to the
Cable/
Antenna, input finger tighten only, over
tightening the connection can
damage
the
TV.
• Before moving the
TV,
disconnect
all of the
cables
connected
to the
TV
to prevent
damaging
the
TV
when it
is
moved.
• Use
an
HOMI cable
connector
within 12 mm
(thickness) x
21
mm (width).
• Use Sony HDMI cable with "High Speed"
indication for HDMI connection.
• For connection with Port Replicator, refer to
the installation
guide
supplied
with the Port
Replicator.
• For more information on connections, refer to
the i-Manual.
Detaching the side and rear terminal
covers
The side and rear terminal covers are
factory-attached to the
TV.
Before connecting cables, remove the side
and rear terminal covers.
Rear terminal cover
p
• After connecting all cables, re-attach the
side terminal cover to the
TV.
For the rear
terminal cover, be sure to store the removed
cover
in
a safe place, keeping it away from
children.
• Shown with a Set Top Box with
HDMI connection
~MHL
)~
()IN~
·
;
";_
•
"
•,
0
OUT
p
•
Connect
4K
devices
(4K Media Player, 4K
Set Top Box, etc.) to the HOMI
IN
2 or HOMI
IN
1
jack
of the
TV
to enjoy
copyright
protected content.
• For the FMP-X1,
connect
it to the HOMI
IN
2
jack
only (The availability
depends
on
region).

Recommendation for an F type plug
Projection of the inner wire from the
connection part must be less than 1.5 mm.
~]7mmmax
.
.-.---.
1.5 mm max.
(Reference drawing for
an
F type plug)
• Shown with a Set Top Box with
COMPONENT connection
..
+-
VIDEO
OPR
..
(MONO)
(MONO)
1©J
©J1
..
TO
oAr
..
Set Top Box
(Continued)

• Cable System or VHF/UHF Antenna
System
Cable or Antenna
• Shown with MHL device with MHL
connection
~:-MHL
sv
:-:-:
900
rnA MAX
Use authorized
MHL 2 CABLE
with MHL logo
+QI[)m-!-C]l+
T--<=P+
Use authorized
•
G=:;:;
r-
:-o-
-- ..-
--'"-
MHL2
device
•0=
0
MHL 3 CABLE
"_._
with MHL logo MHL 3
device
The
TV
simultaneously charges the MHL-
compatible connected device while playing
photo/music/video files. You can use the
TV
remote control to control the connected
MHL-compatible device.
rb
• If Auto Input Change (MHL)
is
set to On, the
TV
automatically switches to HOMI
IN
2/MHL
or HDMI
IN
4/MHL from other input when
MHL-compatible
device
is
connected to
HOMI
IN
2/MHL or HDMI
IN
4/MHL jack. The
availability of Auto Input Change (MHL)
depends
on whether the MHL-compatible
device
can
support
this feature.
• If Charge MHL during Power Off
is
set to
On, you can continue charging the MHL-
compatible
device
even when the
TV
is
in
standby
mode.
• Connect the 4K smartphone or mobile
devices
to the HOMI
IN
2/MHL jack.
• Use authorized MHL 3 CABLE with MHL logo
for 4K smartphone or mobile devices.

• Shown with HD BRA
VIA® Sync™ Basic Connection
,------------....
*
2
0ptical
Connection
*1
Rear of
TV
I
__
,
CABLE
-~TfNNA
II
L ____
JI
*
1
A/V Receiver
*
1
Blu-ray Disc
c::::::J c::::::J
HD Cable Box or
HD Satellite Receiver
.Lii~
l
.'
t~ID=>-
·
·
:.
SAT(Dish)
...__
...-c:::::::J----.~---
0
"
-
'
~
.....
~-1.:
_,j
~!
ID=>-
Cable/
Antenna
*
1
Signifies a BRA
VIA Sync
capable
device.
*2
The optical connection
is
only needed for A/V receivers that
do
not support ARC (Audio Return Channel).
Set the speaker settings to audio out, press
HOME,
then select
ii;
Settings____..
-4))
Sound
____..
Speakers____..
Audio System.
Set the HOMI CEC settings on the
TV
and
AV
receiver to allow for system audio control for ARC connections.
(Continued)

• Shown with HD Basic Connection with Home Theater System
Rear of
TV
i~
l
I :
..,·
I
...
,-------------------------------,
.,_~,
\ I
.,_~-\.-
/
.,_~-'
Side Panel
+-(lo-
Cable/
Antenna
SO
Cable Box or
SO
Satellite Receiver
c::=:::J
*Optical
Connection
Home Theater System
Blu-ray Oisc/OVO
'
"~~UDo-
a e .
1:
; V
IDEO
~
I c
bl
I
1
~,
~
I
SAT
(D1sh)
--c::=:::J----------------~c::=:::J----
*
The optical connection
is
only needed for home theater system that
do
not support ARC (Audio Return Channel)
when connecting with HDMI.
Set the speaker settings to audio out, press
HOME,
then select
;I;
Settings-.
-4))
Sound
-.
Speakers
-.
Audio System.
Set the HOMI CEC settings on the
TV
and
AV
receiver to allow for system audio control for ARC connections.

• Shown with PC Connection with SD VCR/DVD
Notebook PC
~~·~ .... ·········~;
f Side Panel
PC
~~~·""·T·~
' * DVI
I
I
''---~ --(]9j---. am
~·1
1
HI·I·I~---
~o
VCR
......
L;l Splitter
t
T
Cable/Antenna
,---
~ ... or
'-----~--------------------------------~
Rear of TV
.lf.MHL
sv =
900 mA MAX 11
~o
I
~o
lf ... MHL
,,ot\,;~I',X I
~o (ARC)
I
- : t- II I IIJal
I
iR iN
I
ICABLE.TENNA I
D
* DVI does not support audio signals. Connect the audio output of the PC to the PC speakers or an AN receiver to
listen to sound from the
PC.

3:
Securing the TV
Sony strongly recommends
taking measures to prevent
the
TV
from
toppling
over.
Unsecured
TVs
may topple
and result
in
property
damage, serious bodily
injury or even death.
Preventing the TV
from
Toppling
• Secure the
TV
to a wall and/or stand.
• Do not allow children to play or climb on
furniture and
TV
sets.
• Avoid placing or hanging items
on
the
TV.
• Never install the
TV
on:
-slippery, unstable and/or uneven
surfaces.
-furniture that can easily be used as
steps, such as a chest of drawers.
• Install the
TV
where
it
cannot be pulled,
pushed, or knocked over.
2QUS
• Install the
TV
so that the TV's Table-Top
Stand
does
not protrude out from the
Stand (not supplied).
If
the Table-Top
Stand protrudes out from the Stand, it may
cause the
TV
set to topple over and fall
down.
• Route all AC power
cords
and
connecting cables so that they are not
accessible
to curious children.