Sorelle Berkley User manual

Made in AY, Vietnam
Important Information:
Berkley Double Dresser
Assembly Instruction
Read all instructions BEFORE assembling crib.
KEEP INSTRUTIONS FOR FUTURE USE.
Website: www.sorellefurniture.com

Page 2
(A) Left Side Panel (x1) (B) Middle Panel (x1) (C) Right Side Panel (x1) (D) Front - Top Rail(x1)
(E) Front- Middle Rail (x2) (F) Front- Bottom Rail (x1) ( G ) Rear - Top Rail (x1)
( H) Rear - Bottom Rail (x1) ( I ) Support Rail (x1) ( J ) Top Panel (x1)
( K ) Back Panel(x1)
SORELLE
(R4) Drawer Bottom (x6)
(R3) Drawer Back (x6)
(R1) Drawer Left (x6)
(R2) Drawer Right (x6)
( R ) Drawer Front (x6)
Assembly Parts
(R5) Drawer Support (x6)
(L ) feet (x1)

Page 3
Hardware list
SORELLE
( h ) Knob (x6)
Assembly Parts
(k) Allen Key (1 pc) ( i ) Wall Strap Kit (1 pc) ( f ) Screwdriver (1 pc)
( j ) Plastic Connector (10 pcs)
( e ) 5/32 x 1”mm Allen bolt (6pcs)
(g)
Drawer Screw (48 pcs)
(a) 1/4” x 1-3/8”mm Allen bolt (10 pcs)(b) 1/4 x 1-1/8”mm Allen bolt (4 pcs)
(c). Spring Washer ( 14 pcs)
( d ) Ø3.5 X 15mm Phillips Screw (26 pcs)
( l ) Metal Connector A (6pcs) ( m ) Metal Connector B (6 pcs)
( n ) Drawer Screw (18 pcs)
(o) Falt Washer (14 pc)

A
Page 4
SORELLE
Berkley Double Dresser Assembly
Attach left side panel (A) and right side panel (C) to Front Top rail (D) & Front Middle rail (E) & Front
bottom rail (F) & Rear Top rail (G) and Rear bottom Rail (H)
by using 8 Bolts( a )& 8 Spring washer (c) and 4 Bolts (b) & 4 Spring washer (c ) as Figure 2.
Attach Front Top rail (D) & Front Middle rail (E) & Front bottom rail (F) & Rear Top rail (G) and Rear
bottom Rail (H) to Middle Panel (B) as Figure 1.
1
2
Figure 2
Figure 1
D
E
E
F
G
H
B
F
H
L
I
X2
X2
o+c
a
c+o
a
X4
c+o
b
X4
c+o
a
X4
C

Page 5
SORELLE
Berkley Double Dresser Assembly
Attach Top Panel ( J ) to Send panel as Figure 3.
3
Attach Top Panel (J ) to Send panel by using 10 Plastic Connector ( j )
as Figure 4.
4
J
J
J
C
A
A
B
B
j
j
X 10
Figure 4
Figure 3

Page 6
SORELLE
Drawer Assembly
(n)
(n)
(m)
(l) (n)
g
g
g
g
5
4
3
2
1
3. Secure both sides of
Drawer Front (R) to drawer
assembly with four (4)
Screws (g). Figure 3.
Check all screws for
tightness.
5. Using Drawer Knob
Screw ( e ), install one (1)
Knob ( h ) on Drawer.
Figure 5.
Repeat for all drawers.
Set drawers aside for
later use.
( h )
( e )
( f )
1.Working on a padded
flat surface, attach Drawer
Sides (R1&R2) to Drawer
Back (R3) with Philips Head
Screw(g). Figure 1
2. Slide Drawer Bottom (R4) and into drawer Bottom
Support (R5) assembly. Figure 2
4. Attach Matel Connector A (l)and
Matel Connector B (m). Figure 4
(R3)
(R2)
(R4)
(R)
(R5)
(R1)

A
J
R
R
R
K
J
A
Page 7
Figure 7
Figure 6
SORELLE
Berkley Double Dresser Assembly
Assembly the drawer as Figure 6.
6
Use 26 pcs Wood Screws (d) to attach the Back Panel (K) to the dresser
As shown in Figure 7..
7
d (26x)