SORINEX P00486 User manual

ASSEMBLY INSTRUCTIONS
SORINEX.COM| |1 of 6
DISCLAIMER:
RESISTANCE TRAINING, GYMNASTICS TRAINING, AND ACTIVITIES AT
HEIGHT ARE POTENTIALLY DANGEROUS AND MAY LEAD TO SEVERE INJURY
OR EVEN DEATH. THIS EQUIPMENT MUST BE USED BY COMPETENT AND
RESPONSIBLE PERSONS OR UNDER THE GUIDANCE AND SUPERVISION OF
COMPETENT PERSONS. BE SURE YOU ARE VERSED IN PROPER TECHNIQUE
AND METHODS BEFORE USING ANY EQUIPMENT. THE USER ASSUMES ALL
RISKS AND RESPONSIBILITIES FOR ALL DAMAGE,
INJURY OR DEATH WHICH MAY OCCUR DURING INCORRECT USE OF THIS
EQUIPMENT. SORINEX BEARS NO LIABILITY ABOVE REPLACEMENT VALUE OF
THE EQUIPMENT IN QUESTION.
Sorinex Exercise Equipment | 193 Litton Drive | Lexington, SC 29073 | 1-877-SORINEX | inf[email protected]
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF SORINEX INC.
ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF SORINEX INC. IS PROHIBITED.
Tools Required
Screw Driver
Flat Pack Kickbox

SORINEX.COM| |2 of 6
ASSEMBLY INSTRUCTIONS
Hardware list
0” 1” 6”
52x
6x2” Flat Head
Screw
2x
Side Handle
Panel
2x
Bottom/Top
Panel
2x
Front/Back
Panel
1x
Center Panel

SORINEX.COM| |
ASSEMBLY INSTRUCTIONS
3 of 6
Connect Side Handle Pane with Hardware. Insert second Side Handle Panel to Bottom
Panel.
Place Bottom Panel on floor. Insert Side Handle Panel
to Bottom Panel.
Fasten together with
6x2” Flat Head Screws
1 2
34

SORINEX.COM| |
ASSEMBLY INSTRUCTIONS
4 of 6
Insert Center Panel.
Connect to Assembly with Hardware.
Connect to Assembly with Hardware. Insert Front Panel onto Assembly.
5 6
7 8

SORINEX.COM| |
ASSEMBLY INSTRUCTIONS
5 of 6
Insert Top Panel onto Assembly.
Connect with Hardware.
No Hardware is required for Center Panel. Insert Back Panel.
910
11 12

SORINEX.COM| |6 of 6
ASSEMBLY INSTRUCTIONS
Flat Pack Kickbox is now assembled.
Connect with remaining Hardware.
13
14