Sota Silver Pulser SP7 User manual

© 2014-2021 SOTA Instruments Inc. Page 1 of 16|www.sota.com
The Silver Pulser
Model SP7 Manual
CONTENTS
WELCOME TO SOTA..................................................................................................... 3
BEFORE USING ............................................................................................................... 3
LEARN MORE ................................................................................................................. 3
COMPLETE UNIT INCLUDES...................................................................................... 3
DO NOT USE.................................................................................................................... 4
MICROPULSING CAUTIONS ...................................................................................... 5
IONIC~COLLOIDAL SILVER CAUTIONS................................................................. 5
GENERAL CAUTION..................................................................................................... 5
SUMMARY OF LIGHTS ................................................................................................. 6
HOW TO USE THE MICROPULSING FUNCTION .................................................. 6
Cotton Sleeves Option ............................................................................................... 7
Sponge Sleeves Option .............................................................................................. 8
How Micropulsing Should Feel ............................................................................. 10
Sensitive Skin ............................................................................................................. 11
Typical Use ................................................................................................................ 11
HOW TO USE THE IONIC~COLLOIDAL SILVER FUNCTION ......................... 12
How to Assemble ...................................................................................................... 12
How to Make Ionic~Colloidal Silver...................................................................... 12
Typical Use................................................................................................................. 14

© 2014-2021 SOTA Instruments Inc. Page 2 of 16|www.sota.com
The Silver Pulser Model SP7 Manual
ELECTRICAL SPECIFICATIONS .............................................................................. 14
Power Requirements................................................................................................. 14
Optional Power Input............................................................................................... 14
Output Specications................................................................................................ 15
TROUBLESHOOTING.................................................................................................. 15
COUNTRIES THAT PARTICIPATE IN MANUFACTURING............................... 15
REPLACEMENT ACCESSORIES................................................................................ 15
WARRANTY................................................................................................................... 15
REPAIRS.......................................................................................................................... 16

© 2014-2021 SOTA Instruments Inc. Page 3 of 16|www.sota.com
The Silver Pulser Model SP7 Manual
WELCOME TO SOTA
Thank you for allowing us to be a part of your Wellness Team.
The Silver Pulser is a consumer product designed to be used as part of a Wellness
Lifestyle. A commitment to healthy lifestyle choices is an important factor in the
journey to Wellness.
The SOTA Silver Pulser has two functions – Micropulsing and making Ionic~Colloidal
Silver. Micropulsing offers gentle microcurrents that work with the body’s natural
electricity for more energy, general health and well-being. Ionic~Colloidal Silver is one
of nature’s gifts and can be made easily and inexpensively at home.
The Silver Pulser is designed to be used independently, but can also be used together
with any of the SOTA Products.
With proper care, your Silver Pulser should provide you many years of trouble-free
use.
Please understand that results will vary.
BEFORE USING
Please read the manual thoroughly before using your Silver Pulser. For the most up-to-
date manual, please visit our website www.sota.com/manuals.
We’ve made every effort to ensure the information in your manual is up-to-date at
the time of printing ... since that time however, new information may have become
available.
LEARN MORE
To learn more about the Silver Pulser we invite
you to visit the SOTA website:
www.sota.com
The website offers How to Videos, Frequently
Asked Questions, The SOTA Products User Guide,
SOTA News ... and more.
COMPLETE UNIT INCLUDES
• One (1) Silver Pulser Unit
• One (1) 9-Volt Alkaline Battery

© 2014-2021 SOTA Instruments Inc. Page 4 of 16|www.sota.com
The Silver Pulser Model SP7 Manual
• One (1) Carrying Case or Packaging Box
• One (1) Product Manual
FOR MICROPULSING APPLICATION:
• One (1) Micropulsing Cord for Rubber Probes
• Two (2) Pair Conductive Rubber Probes
• One (1) Arm Band and Clip
• One (1) Dark Glass Dropper Bottle
COTTON SLEEVES OPTION:
• Six (6) Pair Cotton Sleeves with Velcro®
• One (1) Neoprene®Velcro®Wrist Strap
SPONGE SLEEVES OPTION:
• Six (6) Pair Sponge Sleeves with Velcro®
• One (1) Velcro®Wrist Strap
FOR MAKING IONIC~COLLOIDAL SILVER:
• One (1) Silver Wire Holder
• Two (2) Silver Wires of .9999 (4 Nine) Purity
• One (1) Green Scrub Pad
DO NOT USE
1.Do not use in the following situations as safety has not been explored using the
Micropulsing function:
a. In the case of pregnancy.
b. With an active implanted device such as a pacemaker, etc.
2.As with all electrical products do not use near water, when driving a car or when
operating heavy equipment.
3.Do not connect the Micropulsing Cord or the Silver Wire Holder to any other USB
outlet, such as a computer or power supply. Do not plug any other USB connections
into the Silver Pulser, other than the Micropulsing Cord and the Silver Wire Holder.

© 2014-2021 SOTA Instruments Inc. Page 5 of 16|www.sota.com
The Silver Pulser Model SP7 Manual
MICROPULSING CAUTIONS
1.Do not place the Conductive Rubber Probes over skin lesions, abrasions, new scars,
cuts, eruptions or sunburn.
2.Discontinue use if the Micropulsing suddenly feels different or prickly and the
YELLOW light stops ashing. Turn the unit OFF and contact SOTA.
3.Caution is advised if using potentially harmful substances such as recreational and
prescription drugs, as it is not known if microcurrents will interact or if individual
reactions may occur.
4.Caution is required in the following situations as a burn may occur, which could
scar:
a. Do not apply the bare metal pins to the skin.
b. Do not allow the Cotton or Sponge Sleeves to dry out while Micropulsing.
c. Do not Micropulse while sleeping, as the Cotton or Sponge Sleeves may dry out.
IONIC~COLLOIDAL SILVER CAUTIONS
We recommend taking occasional breaks from consuming Ionic~Colloidal Silver for
the following reason:
A handful of people have experienced argyria after drinking large amounts of
Ionic~Colloidal Silver daily, over a long period of time. Argyria is a bluish tinge of
the skin. This occurs when excess silver is eliminated through the skin and exposed
to light. Darkening of the moons of the ngernails is usually an early sign.
The risk of argyria is considered greater for those who are ingesting incorrectly made
Ionic~Colloidal Silver and to a lesser degree, those who are decient in selenium or
vitamin E.
When making and drinking Ionic~Colloidal Silver as currently recommended by
SOTA, the risk of argyria is extremely rare.
GENERAL CAUTION
While this technology is generally considered safe, there exists potential for rare
individual reactions that cannot reasonably be foreseen. Therefore, your use of the
SOTA Products constitutes your agreement that you are responsible for your decision
to use the technology and that you hold SOTA harmless for any injuries or damage
believed to arise from using the SOTA Products.

© 2014-2021 SOTA Instruments Inc. Page 6 of 16|www.sota.com
The Silver Pulser Model SP7 Manual
SUMMARY OF LIGHTS
GREEN: Indicates the unit is on.
RED: Indicates the battery is low and will soon need replacing.
YELLOW: Indicates the Micropulsing function is in operation.
ORANGE: Indicates the Ionic~Colloidal Silver function is in operation.
HOW TO USE THE MICROPULSING FUNCTION
1.Place the 9-Volt Alkaline battery in the unit.
a. On the back of the unit, slide off the
battery cover.
b. Position the 9-Volt Alkaline battery so
the positive (+) and negative (-) terminals
line up as in image 1 or image 2. Your
unit will either have a small circle & large
circle embedded in the plastic case as in
image 1 OR the label inside the case will
be shaped like a battery and show you
the terminals as in image 2.
c. Slide the 9-Volt Alkaline battery into the
case and push down. Slide the cover back
onto the unit.
2.Attach the Conductive Rubber Probes to the
Micropulsing Cord by gently sliding the
Rubber Probes over the metal pins on the
Micropulsing Cord, as in image 3.
Note: Except to occasionally clean them, the
Rubber Probes can stay on the Micropulsing
Cord between uses.
3. Clean the wrist area to remove oils from the
skin. This will allow for better conductivity.
4. Slide the Arm Band up the arm to a
comfortable position. Tighten the band to secure
it in place as in image 4.
1
2
3

© 2014-2021 SOTA Instruments Inc. Page 7 of 16|www.sota.com
The Silver Pulser Model SP7 Manual
Options:
a. If preferred the unit can be placed in a pocket. A
longer Micropulsing Cord is needed for this option.
b. If the Arm Band is too large, a shorter Arm Band is
available.
5. Insert the
Micropulsing Cord into
the jack on the unit as
shown in image 5. The
USB symbol on the
plug should be facing
up. When the plug
is positioned correctly, it will slide in gently. Do not
force.
COTTON SLEEVES OPTION
6. Slide the clip on the back of the Silver Pulser into
the holding clip on the Arm Band as in image 6.
7.Put the Wrist Strap on with the Velcro®side of the
Wrist Strap face-out rather than towards the skin.
8.Prepare one pair of Cotton Sleeves. Each Cotton Sleeve
is sewn on three sides; to nd the open end of the
Cotton Sleeve, squeeze the long sides of the sleeve and
the unsewn end will pop open.
9.Attach one Cotton Sleeve to the Wrist Strap in line
with the pulse point on the thumb side of the wrist.
The open end of the Cotton Sleeve will point down
toward the elbow. Press the sleeve to the Wrist Strap
to rmly adhere the sleeve in place.
10.Place the other Cotton Sleeve, again with the open
side towards the elbow, in line with the pulse point
on the little nger side of the wrist. This pulse point is usually harder to feel. It is
located in the soft hollow on the wrist, in line with the little nger. Press the sleeve
to the Wrist Strap to rmly adhere the sleeve in place. See image 7.
4
6
5

© 2014-2021 SOTA Instruments Inc. Page 8 of 16|www.sota.com
The Silver Pulser Model SP7 Manual
Once in place, the Velcro®will hold the Cotton
Sleeves in the right position for repeated use.
11.Take the Wrist Strap off.
12.Insert one probe from the Micropulsing Cord into
the open end of each Cotton Sleeve. Use a gentle
twisting motion to work the Rubber Probes into the
Cotton Sleeves.
13.Wet the Cotton Sleeves with water.
14.Put the Wrist Strap on so the damp Cotton Sleeves
are against the skin over the pulse points. See image
9 on page 9.
SPONGE SLEEVES OPTION
6.Lay the Wrist Strap on a at surface. The soft ‘loop’
side of the Velcro®should be facing up.
7.Prepare one pair of Sponge Sleeves by moistening them with water. Squeeze out the
excess water.
8.Insert one Rubber Probe from the Micropulsing Cord into each moistened Sponge
Sleeve. Do not insert Rubber Probes into dry Sponge Sleeves. Insert the Rubber
Probe just far enough so it is hidden inside the Sponge Sleeve.
9.Place the two Sponge Sleeves on the Wrist Strap as shown in Image 8, approximately
one nger-width apart.
10. Place your wrists on top of the Sponge
Sleeves.
11. Hold the Sponge Sleeves in place with your
wrist while wrapping the Wrist Strap around
the wrist securing the Velcro® in place. The
Wrist Strap should be snug enough to hold the
Sponge Sleeves in place, but not so tight that it is
uncomfortable.
12.Adjust the Sponge Sleeves so they are aligned properly. One Sponge Sleeve should
be in line with the pulse point on the thumb side of the wrist. The other should be
in line with the pulse point on the little nger side of the wrist. This pulse point is
7
8

© 2014-2021 SOTA Instruments Inc. Page 9 of 16|www.sota.com
The Silver Pulser Model SP7 Manual
usually harder to feel. It is located in the soft hollow
of the wrist, in line with the little nger as shown in
Image 9.
13.If the Wrist Strap is too long it can be cut to size.
Measure the excess and using scissors cut the strap at
the end that does not have the rough ‘hook’ Velcro®.
14.Slide the clip on the back of the Silver Pulser into the
holding clip on the Arm Band as in Image 6 on page 7.
15.Turn the unit ON by rotating the ON/OFF switch
clockwise. Turn the switch slowly until you feel the
current. If you do not feel the current, see ‘Notes’ on
page 10.
a. The green light indicates the unit is ON. If the light
does not come on, the battery may not be placed
correctly.
b. The ashing yellow light should come on and get
brighter as the intensity is turned up. If the ashing
yellow light does not come on, the
electrical path has not been established. See
‘Troubleshooting’ on page 15.
16. When nished, turn the unit OFF by
rotating the ON/OFF switch counter
clockwise until it clicks. Do not force the
ON/OFF switch past its natural stopping
point.
17. Unplug the Micropulsing Cord. Do not
store the unit with the Micropulsing Cord
plugged in as this can damage the Cord.
18. Clean the wrist and apply a healing
lotion to avoid irritation.
9

© 2014-2021 SOTA Instruments Inc. Page 10 of 16|www.sota.com
The Silver Pulser Model SP7 Manual
Notes:
Suggestions for Feeling the Current: If the current is not felt with wet Cotton or wet
Sponge Sleeves, prepare a mild salt solution to wet the sleeves. Add a few grains of
salt to the water in the dropper bottle.
Drink enough water to keep the body well hydrated. Hydration can affect the ability
to feel the current.
Care of Micropulsing Cord and Rubber Probes: Remove the Rubber Probes
occasionally to clean in a mild soap solution. Rinse thoroughly. If necessary, gently
wipe the metal pins of the Micropulsing Cord.
Care of Cotton and Sponge Sleeves: Wash or rinse sleeves occasionally. Periodically
discard and replace Cotton or Sponge Sleeves.
Alternatives to Cotton and Sponge Sleeves:
a. All Cotton Sleeves: SOTA offers Cotton Sleeves without Velcro®.
b. Unbleached Paper Towel: Cut a small square of paper towel large enough to wrap
around the Rubber Probe 2 or 3 times.
c. Cotton Flannel: Cut a small square of cotton annel and wrap around the Rubber
Probe. Secure it in place with thread.
Rubber Probes: Over time, the Rubber Probes will lose their conductivity and need
replacing. Refer to the SP7 Troubleshooting Guide for instructions on how to test the
Rubber Probes.
Low Battery Warning: The RED light comes on and the unit will beep when the
battery is low. This means the battery will soon need to be replaced. The battery can
continue to be used until the YELLOW light goes off.
Power Supply: When Micropulsing, as a safety feature, the unit can only be powered
by a 9-Volt battery.
Replacement Batteries: When purchasing replacement 9-Volt batteries, take the
Silver Pulser with you to ensure a proper t, as 9-Volt batteries vary in size.
HOW MICROPULSING SHOULD FEEL
1. The sensation is a gentle pulsing. While the microcurrents should be felt, it is not
necessary to turn the intensity control up to an uncomfortable level.
2. With repeated use, the ability to feel the microcurrents may change. It may be

© 2014-2021 SOTA Instruments Inc. Page 11 of 16|www.sota.com
The Silver Pulser Model SP7 Manual
necessary to increase the intensity in order to feel the microcurrents.
3. Twitching of the ngers is normal at a higher intensity.
4. During the rst weeks of use, the skin may become irritated. Over time, irritation
usually decreases or disappears. Alternate wrists each session to minimize the
potential for irritation.
SENSITIVE SKIN
Some individuals may be particularly sensitive to microcurrents and the irritation may
continue. To minimize irritation:
1. Use Sponge Sleeves.
2. Wash wrists thoroughly after each session and apply a healing gel or lotion such
as aloe vera, vitamin E or MSM cream.
3. Micropulse for shorter periods of time until the irritation disappears.
4. Wet the Cotton or Sponge Sleeves with distilled water or Ionic~Colloidal Silver.
If unable to feel the current, try a commercial saline solution for the eyes. This is
gentler than adding salt to the water.
5. A conductive gel or aloe vera gel added to the wet Cotton Sleeves may help to
reduce irritation.
TYPICAL USE
Alternate wrists daily.
Length of Session: Build up time gradually. It is best to start slowly. Start with 10 to
20 minutes a day. Increase gradually to a minimum of 2 hours each day.
Length of Use: The SOTA Products User Guide available at
www.sota.com/spug offers suggestions for Focused, Basic and Ongoing Wellness
Plans.
General Guideline: Use daily for a minimum of 8 to 12 weeks. Once completed,
setting a schedule for ongoing use is benecial.
Drink Plenty of Water: It’s important to drink enough water when using the unit.
Drinking ozonated water is especially helpful.
Stop Gradually: Reduce the amount of time each day for the last week of use. If
using more than one SOTA unit, it is suggested to stop only one unit at a time.

© 2014-2021 SOTA Instruments Inc. Page 12 of 16|www.sota.com
The Silver Pulser Model SP7 Manual
HOW TO USE THE IONIC~COLLOIDAL SILVER FUNCTION
HOW TO ASSEMBLE
1.The Silver Wires t into the two small holes in the Silver Wire Holder as in the
picture.
2.To insert the Silver Wires, move the spring clip
away from the hole.
3.Push the wire through the hole. Most of the wire
should be below the holder. Release the spring
clip to hold the Silver Wire snuggly in place. It
may be easier to insert from the underside of the
holder.
4.Repeat Step 2 for the second Silver Wire.
5.Plug the Silver Wire Holder into the Silver Pulser, ensuring that the USB symbol on
the plug is facing up.
HOW TO MAKE IONIC~COLLOIDAL SILVER
The Silver Pulser provides a constant current output, which allows for a very simple
procedure for making a high quality Ionic~Colloidal Silver using room temperature
water.
1.Pour two cups (16 ounces or 500 ml) of room
temperature distilled water into a tall glass
container. Do not use a metal or plastic
container.
2.Place the Silver Wire Holder on the glass
container immersing at least 70% of the
Silver Wires into the water. Keep them at
least 25 mm or 1 inch from the bottom of the
container.
3.Turn the unit ON by rotating the ON/OFF
switch clockwise until it clicks. It is not
necessary to turn up the intensity.
The ORANGE light will brighten as the
current increases up to the 1.0 mA limit.

© 2014-2021 SOTA Instruments Inc. Page 13 of 16|www.sota.com
The Silver Pulser Model SP7 Manual
4.Stir occasionally with a non-metal utensil. Occasionally, wipe off the grey or black
silver oxide that builds up on the Silver Wires.
5.Two cups (16 ounces or 500 ml) for 2 hours will produce a 5 to 8 ppm batch of
Ionic~Colloidal Silver, depending on the brand of distilled water. The concentration
of silver is measured in parts per million or ppm.
6.When nished, wipe the Silver Wires with paper towel to remove residue. Buff
lightly when needed to keep them free of sediment. Harsher bufng will wear away
the silver faster.
Notes:
Color: Ionic~Colloidal Silver remains colorless to about 5 or 6 ppm. At a slightly
higher ppm it will be a pale gold color. Do not drink if it is darker than pale gold or if
it is dark grey as this indicates a higher level of impurities or larger particle sizes.
Clarity: The silver electrolyte should be clear. Do not drink if it is cloudy.
To Make Larger Quantities: The Silver Pulser can be used to make larger quantities
of Ionic~Colloidal Silver. For a concentration between 5 to 8 ppm, use the following
times as a guide:
For 4 cups or 1 liter: 3 to 4 hours.
For 1 gallon (16 cups) or 4 liters: 10 to 12 hours.
Storage: Pour the Ionic~Colloidal Silver into a dark glass bottle—never metal—and
store in a dark, dry place. Over time, light will degrade Ionic~Colloidal Silver by
turning the electrolyte grey or black. Discard if this occurs.
When made and stored properly, Ionic~Colloidal Silver retains freshness for many
months. It is suggested, however, that you use as soon as possible. If settling occurs,
it is losing potency. Do not drink any sediment.
Do not freeze, refrigerate, or expose Ionic~Colloidal Silver to extremes of
temperatures as its potency may be affected.
Save on Batteries: When making Ionic~Colloidal Silver the unit can be powered by
an AC-DC wall adaptor. See ‘Optional Power Input’ on page 14.
Switch Silver Wire Positions: The silver ions only come off the wire in the positive
(+) or anode terminal into the water. To equalize the wearing of the Silver Wires,
periodically exchange the position of the wires. If left in the same position, only one
Silver Wire will gradually wear away.

© 2014-2021 SOTA Instruments Inc. Page 14 of 16|www.sota.com
The Silver Pulser Model SP7 Manual
Replacing the Silver Wires: The Silver Wires are of the highest grade .9999 or 99.99%
or 4 Nine pure ne silver. When the SOTA pure Silver Wires wear too thin, do not
replace with sterling silver, as it contains nickel, which can be toxic.
TYPICAL USE
Quantity: There is no denite amount to drink. When consumed on a regular basis—
daily or several times a week—it is best to drink no more than 1 to 2 ounces
(30 to 60 ml) at a time.
Larger amounts of Ionic~Colloidal Silver—1 cup or more—can be consumed for
short periods of time, for example, a few weeks. It is better to take smaller amounts
throughout the day rather than all at once.
Length of Use: The SOTA Products User Guide available at
www.sota.com/spug offers suggestions for Focused, Basic and Ongoing Wellness
Plans.
General Guideline: 1 to 2 ounces (30 to 60 ml) or more daily for 2 or 3 months.
Ionic~Colloidal Silver can be used as needed. The initial program can be repeated at
any time. If using for an extended period, it is wise to take breaks.
Strength: Laboratory testing indicates Ionic~Colloidal Silver is effective as low as 2
ppm. When ingesting on a regular basis, it is suggested to limit the strength to less
than 10 ppm.
ELECTRICAL SPECIFICATIONS
POWER REQUIREMENTS
Use a 9–Volt Alkaline battery for proper operation.
OPTIONAL POWER INPUT
Both functions of the Silver Pulser can also be operated using rechargeable batteries.
When purchasing rechargeable batteries, it is suggested to take the unit with you to
ensure the batteries will t the enclosure.
To use a wall adaptor for making Ionic~Colloidal Silver the output should be from
6 to 12 Volts DC with a Tip or Center Positive pin and a minimum of 500 mA
(milliamperes) of current. The wall adaptor that comes with other SOTA units can be
used for making Ionic~Colloidal Silver.
Caution: Exceeding the voltage rating or reverse connection may result in injury
or unit failure. This will void the warranty.

© 2014-2021 SOTA Instruments Inc. Page 15 of 16|www.sota.com
The Silver Pulser Model SP7 Manual
To operate the Ionic~Colloidal Silver Function from a 12 Volt DC source, such as an
automobile battery or an appropriate Solar Panel, purchase a Universal Power Cord
with Tip or Center Positive polarity.
OUTPUT SPECIFICATIONS
The output voltage is a nominal 31 Volts.
Micropulsing Application: Frequency through the metal pins is ~3.92 Hz or ½ of the
Earth Schumann frequency of 7.83 Hz, (+/- 1 Hz) with a Bi-Phasic Square Wave @ 31
Volts (+/- 1 Volt) peak per cycle.
Maximum current through the metal pins is ~8 milliamperes into 1,000 ohms, ~12
milliamperes into a short circuit at 31 Volts peak per cycle.
Ionic~Colloidal Silver Application: The maximum current through the Silver Wires
is 1.0 milliamperes (+/- 0.5 mA) at 31 VDC compliance voltage when the Silver
Wires are touched together to short the circuit.
TROUBLESHOOTING
Troubleshooting Guides for both the Micropulsing and Ionic~Colloidal Silver
functions of the Silver Pulser are available at www.sota.com/manuals. These Guides
are a great tool to check if you are experiencing any issues with your unit.
COUNTRIES THAT PARTICIPATE IN MANUFACTURING
The manufacturing of the SOTA Products is a global collaboration. The following
countries have participated in the making of the Silver Pulser (listed in alphabetical
order): Canada, China, Hong Kong, Malaysia, Mexico, Taiwan, Thailand and the
USA
REPLACEMENT ACCESSORIES
To replace your accessories, please contact your supplier.
WARRANTY
The Silver Pulser Model SP7 is covered by a three (3) year limited warranty. Please
keep proof of purchase. Warranty is void if the failure is due to abuse or negligence.
SOTA reserves the right to make changes to the Silver Pulser without obligation.

Made in China. Designed and Engineered in Canada.
• The SOTA units are consumer products designed to be used as part of a Wellness Lifestyle • The SOTA units are not medical devices nor are they
intended to diagnose, treat or cure any medical or health condition • The use, safety or effectiveness of the SOTA units has not been approved by any
government agency • Please consult a health practitioner for any medical or health condition • Results using the SOTA Products will vary for each
person • Please note that all purchases of SOTA Products are deemed to be made in Penticton, BC, Canada •
© 2014-2021 SOTA Instruments Inc. Page 16 of 16 |www.sota.com
The Silver Pulser Model SP7 Manual
REPAIRS
Please contact your supplier for return instructions. For information about your closest
repair depot, contact [email protected] or call 1.250.770.2023 or 1.800.224.0242 (toll-free
in Canada & USA).