Sound Sation ZEUS II series User manual

ZEUS II series
PROFESSIONAL POWER AMPLIFIER
Please read this manual carefully and properly take care of it
USER MANUAL
Leggete questo manuale e conservatelo per future consultazioni
MANUALE UTENTE
100
CHANNEL 1
100
CHANNEL 2POWER
FAULT
CLIP
SIGNAL
FAULT
CLIP
SIGNAL
POWER
ZEUS
H-2700 2700W Class-H Professional Power Amplifier

Dear customer,
First of all thanks far purchasing a SOUNDSATION® product. Our mission is to satisfy
all possible needs of musical instrument and professional audio users offering a wide
range of products using the latest technologies.
We hope you will be satised with this item and, if you want to collaborate, we are
looking for a feedback from you about the operation of the product and possible
improvements to introduce in the next future. Go to our website www.soundsation-
music.com and send an e-mail with your opinion, this will help us to build instruments
ever closer to customer’s real requirements.
One last thing: read this manual before using the instrument, an incorrect operation
can cause damages to you and to the unit. Take care!
The SOUNDSATION Team
Gentile Cliente,
Grazie per aver scelto un prodotto SOUNDSATION®. La nostra missione è quella di
offrire ai nostri utenti una vasta gamma di strumenti musicali ed apparecchiature audio
e lighting con tecnologie di ultima generazione.
Speriamo di aver soddisfatto le vostre aspettative e, se voleste collaborare, sarem-
mo lieti di ricevere un vostro feedback sulla qualità del prodotto al ne di migliorare
costantemente la nostra produzione. Visitate il nostro sito www.soundsationmusic.
com ed inviateci una mail con la vostra opinione, questo ci aiuterà a sviluppare nuovi
prodotti quanto più vicini alle vostre esigenze.
Un’ultima cosa, leggete il presente manuale al ne di evitare danni alla persona ed al
prodotto, derivanti da un utilizzo non corretto.
Il Team SOUNDSATION

3
ENGLISH
TABLE OF CONTENTS
1. UNBOXING.................................................................................................................5
2. ACCESSORIES .............................................................................................................6
3. OVERVIEW..................................................................................................................6
3.1. MAIN FEATURES.....................................................................................................................................................6
4. FRONT PANEL DESCRIPTION ...................................................................................7
5. REAR PANEL - A-300, A-600, A-900........................................................................8
6. REAR PANEL - H-1800, H-2700.............................................................9
7. AUDIO CONNECTIONS............................................................................................10
8. A-300, A-600, A-900 OPERATION MODES ...........................................................11
8.1. A-300, A-600, A-900 - STEREO MODE.........................................................................................................12
8.2. STEREO / PARALLEL MODE CABLE WIRING...............................................................................................13
8.3. A-300, A-600, A-900 - BRIDGE MODE.........................................................................................................14
8.4. BRIDGE MODE CABLE WIRING.......................................................................................................................15
9. H-1800, H-2700 OPERATION MODES ...................................................................15
9.1. H-1800, H-2700 - STEREO MODE .................................................................................................................16
9.2. H-1800, H-2700 - PARALLEL MODE .............................................................................................................17
9.3. H-1800, H-2700 - BRIDGE MODE..................................................................................................................18
10. A-300, A-600, A-900 SPECIFICATION....................................................................19
11. H-1800, H-2700 SPECIFICATION............................................................................19
12. WARRANTY AND SERVICE .....................................................................................20
13. WARNING ................................................................................................................20

4
ENGLISH
ZEUS II series User manual
IMPORTANT SAFETY SYMBOLS
The symbol is used to indicate that some hazardous live terminals are
involved within this apparatus, even under the normal operating con-
ditions, which may be sufcient to constitute the risk of electric shock
or death.
The symbol is used in the service documentation to indicate that spe-
cic component shall be replaced only by the component specied in
that documentation for safety reasons.
Protective grounding terminal
Alternating current/voltage
Hazardous live terminal
Denotes the apparatus is turned on
Denotes the apparatus is turned off
WARNING: Describes precautions that should be observed to prevent the danger
of injury or death to the operator.
CAUTION: Describes precautions that should be observed to prevent danger of
the apparatus.
TAKING CARE OF YOUR PRODUCT
fRead these instructions
fKeep these instructions
fHeed all warning
fFollow all instructions
1)^Water / Moisture
The apparatus should be protected from moisture and rain and can not be used near
water; for example near a bathtub, a kitchen sink, a swimming pool, etc.
2)^Heat
The apparatus should be located away from heat sources such as radiators, stoves or
other appliances that produce heat.

5
ENGLISH
ZEUS II series User manual
3)^Ventilation
Do not block areas of ventilation opening. Failure to do could result in re. Always
install according to the manufacturer’s instructions.
4)^Object and Liquid Entry
Objects do not fall into and liquids are not spilled into the inside of the apparatus for
safety.
5)^Power Cord and Plug
Protect the power cord from being walked on or pinched particularly at plugs, conve-
nience receptacles, and the point where they exit from the apparatus. Do not defeat
the safety purpose of the polarized or grounding-type plug. A polarized plug has two
poles; a grounding-type plug has two poles and a third grounding terminal. The third
prong is provided for your safety. If the provided plug does not t into your outlet, refer
to an electrician for replacement.
6)^Electrical Connection
Improper electrical wiring may invalidate the product warranty.
7)^Cleaning
Clean only with a dry cloth. Do not use any solvents such as benzene or alcohol.
8)^Servicing
Do not implement any servicing other than those means described in the manual. Refer
all servicing to qualied service personnel only. Only use accessories/attachments or
parts recommended by the manufacturer.
9)^Warning
Unplug this apparatus during lightning storms or when unused for long periods of
time.
1. UNBOXING
Thank you for purchasing your ZEUS II Series Amplier. Each unit has been well tested
and shipped in perfect operating conditions. Carefully unpack the carton and check the
contents to ensure that all parts are present and in good conditions:
f1 Amplier
f1 Power cable
f1 User manual
If anything damaged during transport, notify the shipper immediately and keep pack-
ing material for inspection. Again, please save the carton and all the packing materials.
If the unit must be returned to the manufacturer, it is important that the unit is returned
in the original manufacturer’s packing. Please do not take any action without rst con-
tacting us.

6
ENGLISH
ZEUS II series User manual
WARNING: Packaging box is not a toy! Keep out of reach of children!!! Keep
in a safe place the original packaging material for future use.
2. ACCESSORIES
SOUNDSATION can supply a wide range of quality accessories that you can use with
ZEUS II Series ampliers, like Mixers, Speakers, Cable, Stands, etc.
All products in our catalogue has been long tested with this device so we recommend
to use Genuine SOUNDSATION Accessories and Spare Parts.
Ask your SOUNDSATION dealer for any accessories you could need to ensure best
performance of the product.
3. OVERVIEW
The ZEUS II Series ampliers represents a new era in affordable, quality power ampli-
cation. All ve models (3 in AB-Class, and 2 in H-Class) in this series are powerful, rug-
ged and reliable. They are suited for musicians, DJs, and entertainers as well as houses
of worship, discos, clubs and pubs
Models are A-300, A-600, A-900 in AB-Class, and H-1800, H-2700 in H-Class.
Features include RCA and XLR inputs, user selectable input sensitivity of 0.775V or 1.4V
for the H-1800, H-2700 models, Speakon® and binding post outputs, stereo/parallel/
bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling.
3.1. MAIN FEATURES
fIntelligent Cooling System Makes Power Amplier Work More Quiet
fStereo/parallel/bridged-mono Modes.
fHigh Quality Transformer with High Performance.
fUpgraded Cooling Fans With Magnetic Suspension Technology And Low Noise
f2U Chassis Design
fAB-Class and H-Class traditional and reliable circuitry with high-quality components
fSoft Start Function

7
ENGLISH
ZEUS II series User manual
4. FRONT PANEL DESCRIPTION
100
CHANNEL 1
100
CHANNEL 2POWER
FAULT
CLIP
SIGNAL
FAULT
CLIP
SIGNAL
POWER
ZEUS
H-2700 2700W Class-H Professional Power Amplifier
1
2
2
3
34
556 67
1)^POWER Switch
Press the switch to the (1) position to turn ON the amplier and to the (0) position to
turn it OFF.
Note: When the power switch is turned OFF, the device is not completely
disconnected from the mains. So if the amplier is not used for a long time,
please disconnect the power cord from the outlet.
2)^LEVEL CONTROLS
Two knob level controls,one for each channel.
3)^SIGNAL indicator
Two green LEDs, each assigned to one channel. When the input signal exceeds 40 dB,
the LEDs light up.
4)^Power indicator
The green LED, when lit, indicates that the amplier has been turned on and AC power
is available.
5)^FAULT indicator
Two red LEDs, each assigned to one channel. When LEDs light up it means that the
correspondent channel is shutdown.
6)^CLIP indicator
Two yellow LEDs, each assigned to a channel, indicate when the corresponding channel
has an output overload. Some ashing may be normal but if these LEDs remain on for a
long time, please reduce the input signal levels until the LEDs turn off.
7)^VENTILATION grille
It allows constant ventilation between the front and back of the amplier.

8
ENGLISH
ZEUS II series User manual
5. REAR PANEL - A-300, A-600, A-900
WARNING: TO REDUCE THE
RISK OF FIRE OR ELECTRIC
SHOCK, REPLACE FUSE
ONLY WITH SAME TYPE
F15A-250V.
MADE IN P.R.C.
S/N:
ZEUS SERIES
POWER AMPLIFIERS
230V - 50/60Hz
WARNING! ONLY USE THE
POWER CABLE SUPPLIED
WITH THIS PRODUCT
CH-A CH-A BRIDGE
CH-B CH-B
OUTPUTS INPUTS
LIMITER
MODE
GROUNDLIFT
ON
OFF
BRIDGE
STEREO
LIFT
GND
Input Impedence:
20K Balanced / 10K Unbalanced
GND
BRIDGE
A
B
MONO
PINOUT
CH-B
CH-A BRIDGE
1 2
7
3
5
4
6
8
1)^AC POWER CONNECTOR
Plug the power cord into an AC socket properly congured for your particular model.
Note: If you happen to lose the AC line-cord, always use a three-pin plug
with a ground pin. The wire correspondence is as follow:
Cable Pin International
Brown Live L
Blue Neutral N
Yellow/Green Earth
Always connect the earth! Pay attention to your safety!
Before taking into operation for the rst time, the installation has to be approved by an
expert.
2)^OUTPUT CONNECTORS
Each channel has one Speakon® and one binding post outputs for connecting to the
loudspeakers.
3)^INPUT CONNECTORS
Each channel has one balanced XLR and one balanced jack TRS inputs.
4)^GROUND LIFT Switch
The ground lift switch eliminates unwanted hum and buzz by interrupting the ground
loops between equipment, preventing current ow along the cable shield between two
devices.
5)^COOLING FAN
The device is equipped with an Intelligent Cooling System so that there is a forced
airow from the front to the back for cooling the device when needed.

9
ENGLISH
ZEUS II series User manual
6)^MODE SWITCH
Allows the selection of STEREO (Dual) or BRIDGE operation modes.
7)^LIMITER SWITCH
This switch is used to activate (ON) or disable (OFF) the protection of the input com-
pression circuit. This protection function is used to decrease the possibility that one or
both channels are clipping or overloaded.
8)^Bridged OUTPUT
When the device is set to BRIDGE mode, the input signal of channel A will be present
on the Output Speakon® named BRIDGE.
6. REAR PANEL - H-1800, H-2700
INPUTS
CH-B
CH-A
1.4V
0.775V
SENS.
BRIDGE
PARALLEL
STEREO
MODE
RESET
230V - 50/60Hz
WARNING! ONLY USE THE
POWER CABLE SUPPLIED
WITH THIS PRODUCT
MADE IN P.R.C.
S/N:
ZEUS SERIES
POWER AMPLIFIERS
BRIDGE
DUAL DUAL
CH-B CH-A
OUTPUTS
1
2 3 45
6
7
1)^AC POWER CONNECTOR
Plug the power cord into an AC socket properly congured for your particular model.
Note: If you happen to lose the AC line-cord, always use a three-pin plug
with a ground pin. The wire correspondence is as follow:
Cable Pin International
Brown Live L
Blue Neutral N
Yellow/Green Earth
Always connect the earth! Pay attention to your safety!
Before taking into operation for the rst time, the installation has to be approved by an
expert.
2)^OUTPUT CONNECTORS
Each channel has one Speakon® and one binding post outputs for connecting to the
loudspeakers.

10
ENGLISH
ZEUS II series User manual
3)^COOLING FANS
The device is equipped with an Intelligent Cooling System so that there is a forced
airow from the front to the back for cooling the device when needed.
4)^INPUT CONNECTORS
Each channel has one balanced XLR and one unbalanced jack RCA inputs.
5)^SENSITIVITY Switch
Allows you to select the input sensitivity of both channels as follows:
- 1,4V when using the balanced XLR inputs.
- 0,775V when using the unbalanced RCA inputs.
6)^MODE SWITCH
Allows the selection of STEREO (Dual), PARALLEL or BRIDGE operation modes.
7)^RESET (Circuit BREAKER) BUTTON
This push button is used to reset the circuit breaker that protects the power supply.
7. AUDIO CONNECTIONS
You will need several cables for the various connections to and from the speaker. See
the pictures below that show the internal wiring of these cables. Be sure to use only
high quality cables.
Use commercially available RCA cables to connect unbalanced stereo sources with RCA
output connectors to RCA stereo inputs Line the ZEUS II unit.
You can, of course, also connect unbalanced equipment to balanced inputs. Use either
mono and stereo jack, making sure ring and collar are connected together (or pins 1 &
3 in the case of XLR connectors).
Balanced use of XLR connectors
1= Ground/Shield
2= Hot (+)
3= Cold (-)
INPUT OUTPUT
In case of unbalanced use Pins 1 and 3 will be jumped

11
ENGLISH
ZEUS II series User manual
Unbalanced use of 1/4” jack TS connector
Strain relief
clamp
Sleeve
Tip
Sleeve
Ground shield
Tip
Signal
Balanced use of 1/4” jack TRS connector
Headphones connection with 1/4” TRS connector
Strain relief
clamp
Sleeve
Tip
Sleeve
Ground shield
Ring Ring
Cold (- Ve)
Tip
Hot (+ Ve)
Unbalanced RCA Connector
Center
Signal
Body
Ground / Shield
IMPORTANT: Before connecting please set the volume control to a minimum
8. A-300, A-600, A-900 OPERATION MODES
The A-300, A-600 and A-900 models have two operation modes:
• Stereo Mode
• Bridge Mode

12
ENGLISH
ZEUS II series User manual
8.1. A-300, A-600, A-900 - STEREO MODE
WARNING: TO REDUCE THE
RISK OF FIRE OR ELECTRIC
SHOCK, REPLACE FUSE
ONLY WITH SAME TYPE
F15A-250V.
MADE IN P.R.C.
S/N:
ZEUS SERIES
POWER AMPLIFIERS
230V - 50/60Hz
WARNING! ONLY USE THE
POWER CABLE SUPPLIED
WITH THIS PRODUCT
CH-A CH-A BRIDGE
CH-B CH-B
OUTPUTS INPUTS
LIMITER
MODE
GROUNDLIFT
ON
OFF
BRIDGE
STEREO
LIFT
GND
Input Impedence:
20K Balanced / 10K Unbalanced
GND
BRIDGE
A
B
MONO
PINOUT
CH-B
CH-A BRIDGE
CH-A
LOUDSPEAKER 1
1+
1-
2-
2+
-
SPEAKON
LOUDSPEAKER SIDE
CHANNEL A
MODE
BRIDGE
STEREO
+
MIXER
CH-B
LOUDSPEAKER 2
1+
1-
2-
2+
-
+SPEAKON
LOUDSPEAKER SIDE
CHANNEL B
In STEREO MODE you have:
• Separate A and B channel inputs
• Separate A and B channel outputs
• Each channel has its level control.
This is the typical setting for amplifying stereo signals. The input signal of channel A will
be present on the output speaker of channel A and the input signal of channel B will be
present on the output speaker of channel B.
To set the amplier in STEREO MODE, the MODE selector should be set to the STEREO
position (bottom) and connect the outputs as shown above. Concerning the cable wir-
ing of STEREO MODE please refer to paragraph 8.2. STEREO / PARALLEL MODE CABLE
WIRING on page 13.

13
ENGLISH
ZEUS II series User manual
8.2. STEREO / PARALLEL MODE CABLE WIRING
COLD
TO AMPLIFIER
TO LOUDSPEAKER
HOT
COLD
HOT
1+
1+
1–
1–
2–
2+
1+
1–
2–
2+
1+
1–

14
ENGLISH
ZEUS II series User manual
8.3.A-300, A-600, A-900 - BRIDGE MODE
WARNING: TO REDUCE THE
RISK OF FIRE OR ELECTRIC
SHOCK, REPLACE FUSE
ONLY WITH SAME TYPE
F15A-250V.
MADE IN P.R.C.
S/N:
ZEUS SERIES
POWER AMPLIFIERS
230V - 50/60Hz
WARNING! ONLY USE THE
POWER CABLE SUPPLIED
WITH THIS PRODUCT
CH-A CH-A BRIDGE
CH-B CH-B
OUTPUTS INPUTS
LIMITER
MODE
GROUNDLIFT
ON
OFF
BRIDGE
STEREO
LIFT
GND
Input Impedence:
20K Balanced / 10K Unbalanced
GND
BRIDGE
A
B
MONO
PINOUT
CH-B
CH-A BRIDGE
CH-A
LOUDSPEAKER
1+
1-
2-
2+
-
SPEAKON BRIDGE
LOUDSPEAKER SIDE
MODE
BRIDGE
STEREO
+
MIXER
BRIDGE mode with a mono input and a mono output, allows you to add the respective
signals of the two amplication channels and make them available on a single output.
The input signal of channel A will be present on the Speakon of the BRIDGE OUTPUT.
Use the channel A control to adjust the volume. To set the amplier in the BRIDGE
MODE, set the MODE selector to the BRIDGE position (top) and connect the output as
shown above. Do not use the black binging posts when the amp is being operated in
BRIDGE MODE
Concerning the cable wiring of BRIDGE MODE please refer to paragraph 8.4 BRIDGE
MODE CABLE WIRING on page 15.

15
ENGLISH
ZEUS II series User manual
8.4.BRIDGE MODE CABLE WIRING
COLD
TO AMPLIFIER
TO LOUDSPEAKER
HOT
COLD
HOT
1+
1+
1–
1–
2–
2+
1+
1–
2–
2+
1+
2+
+
–
A
B
BRIDGE
MODE
Bridged Binding Post Connection
TO LOUDSPEAKER
9. H-1800, H-2700 OPERATION MODES
The H-1800 and H-2700 models have three operation modes:
• Stereo Mode
• Parallel Mode
• Bridge Mode

16
ENGLISH
ZEUS II series User manual
9.1. H-1800, H-2700 - STEREO MODE
S/N:
CH-A
MODE
BRIDGE
STEREO
MIXER
LOUDSPEAKER 1
1+
1-
2-
2+
-
SPEAKON
LOUDSPEAKER SIDE
CHANNEL B
+
INPUTS
CH-B
CH-A
1.4V
0.775V
SENS.
BRIDGE
PARALLEL
STEREO
MODE
RESET
230V - 50/60Hz
WARNING! ONLY USE THE
POWER CABLE SUPPLIED
WITH THIS PRODUCT
MADE IN P.R.C.
S/N:
ZEUS SERIES
POWER AMPLIFIERS
BRIDGE
DUAL DUAL
CH-B CH-A
OUTPUTS
CH-B
LOUDSPEAKER 2
1+
1-
2-
2+
-
SPEAKON
LOUDSPEAKER SIDE
CHANNEL A
+
PARALLEL
In STEREO MODE you have:
• Separate A and B channel inputs
• Separate A and B channel outputs
Each channel has its level control.
This is the typical setting for amplifying stereo signals. The input signal of channel A will
be present on the output speaker of channel A and the input signal of channel B will be
present on the output speaker of channel B.
To set the amplier in STEREO MODE, the MODE selector should be set to the STEREO
position (bottom) and connect the outputs as shown above. Concerning the cable wir-
ing of STEREO MODE please refer to paragraph 8.2. STEREO / PARALLEL MODE CABLE
WIRING on page 13.

17
ENGLISH
ZEUS II series User manual
9.2. H-1800, H-2700 - PARALLEL MODE
S/N:
CH-A
MODE
BRIDGE
STEREO
MIXER
LOUDSPEAKER 1
1+
1-
2-
2+
-
SPEAKON
LOUDSPEAKER SIDE
CHANNEL B
+
INPUTS
CH-B
CH-A
1.4V
0.775V
SENS.
BRIDGE
PARALLEL
STEREO
MODE
RESET
230V - 50/60Hz
WARNING! ONLY USE THE
POWER CABLE SUPPLIED
WITH THIS PRODUCT
MADE IN P.R.C.
S/N:
ZEUS SERIES
POWER AMPLIFIERS
BRIDGE
DUAL DUAL
CH-B CH-A
OUTPUTS
LOUDSPEAKER 2
1+
1-
2-
2+
-
SPEAKON
LOUDSPEAKER SIDE
CHANNEL A
+
PARALLEL
The PARALLEL MODE, with a mono input and two mono outputs, allows you to insert
a mono signal into an input and have the mono signal in both outputs, with separately
adjustable level controls. The input signal (Channel A or Channel B) will be present on
both channels A and B.
To set the amplier in PARALLEL MODE, the MODE selector should be set to the PAR-
ALLEL position (Center) and connect the outputs as shown above. Concerning the cable
wiring of PARALLEL MODE please refer to paragraph 8.2. STEREO / PARALLEL MODE
CABLE WIRING on page 13.

18
ENGLISH
ZEUS II series User manual
9.3.H-1800, H-2700 - BRIDGE MODE
S/N:
CH-A
MODE
BRIDGE
STEREO
MIXER
LOUDSPEAKER
1+
1-
2-
2+
-
SPEAKON
LOUDSPEAKER SIDE
CHANNEL A
+
INPUTS
CH-B
CH-A
1.4V
0.775V
SENS.
BRIDGE
PARALLEL
STEREO
MODE
RESET
230V - 50/60Hz
WARNING! ONLY USE THE
POWER CABLE SUPPLIED
WITH THIS PRODUCT
MADE IN P.R.C.
S/N:
ZEUS SERIES
POWER AMPLIFIERS
BRIDGE
DUAL DUAL
CH-B CH-A
OUTPUTS
PARALLEL
BRIDGE mode with a mono input and a mono output, allows you to add the respective
signals of the two amplication channels and make them available on a single output.
The input signal of channel A will be present on the Speakon of the CHANNEL A OUT-
PUT. Use the channel A control to adjust the volume.
To set the amplier in the BRIDGE MODE, set the MODE selector to the BRIDGE position
(top) and connect the output as shown above.
WARNING: Do not use the black binging posts when the amp is being oper-
ated in BRIDGE MODE. Concerning the cable wiring of BRIDGE MODE please
refer to paragraph 8.4 BRIDGE MODE CABLE WIRING on page 15.

19
ENGLISH
ZEUS II series User manual
10. A-300, A-600, A-900 SPECIFICATION
ZEUS II A-300 ZEUS II A-600 ZEUS II A-900
Stereo Rated Output Power
THD=0.5%,1KHz,both channels
driven
8Ω 2 x 100W
4Ω 2 x 150W
8Ω 2 x 200W
4Ω 2 x 300W
8Ω 2 x 300W
4Ω 2 x 450W
Bridged Output Power 8Ω 300W 8Ω 600W 8Ω 900W
Input Sensitivity 1,4V / 0,775V
Input Impedance 20KΩ / 10KΩ
Frequency Response 20Hz / 20kHz
Damping Factor > 350
S/N Ratio > 95dB
Amplier Class A/B
Power Requirements 220V – 50/60Hz
Dimension(WxHxD) 482 x 320 x 88 mm
Packing Size (WxHxD) 520 x 410 x 135 mm
Height 2 x 19” Rack Unit
Net Weight 10 Kg 10,5 Kg 11,5,Kg
Carton Weight 11,5 Kg 12 Kg 13 Kg
11. H-1800, H-2700 SPECIFICATION
ZEUS II H-1800 ZEUS II H-2700
Stereo Rated Output Power
THD=0.5%,1KHz,both channels
driven
8Ω 2 x 600W
4Ω 2 x 900W
8Ω 2 x 1000W
4Ω 2 x 1350W
Bridged Output Power 8Ω 1800W 8Ω 2700W
Input Sensitivity 1,4V / 0,775V
Input Impedance 20KΩ / 10KΩ
Frequency Response 20Hz / 20kHz
Damping Factor > 200
S/N Ratio > 100dB
Amplier Class H
Power Requirements 220V – 50/60Hz
Dimension(WxHxD) 482 x 370 x 88 mm
Packing Size (WxHxD) 520 x 410 x 135 mm 520 x 455 x 135 mm
Height 2 x 19” Rack Unit
Net Weight 13,5 Kg 19,5 Kg
Carton Weight 15 Kg 21 Kg
NOTE: Ourproductsaresubjecttoaprocessofcontinualfurtherdevelopment.Thereforemodicationstothe
technical features remain subject to change without further notice.

20
ENGLISH
ZEUS II series User manual
12. WARRANTY AND SERVICE
All SOUNDSATION products feature a limited two-year warranty. This two-year warranty is specic
to the date of purchase as shown on your purchase receipt.
The following cases/components are not covered from the above warranty:
• Any accessories supplied with the product
• Improper use
• Fault due to wear and tear
• Any modication of the product effected by the user or a third party
SOUNDSATION shall satisfy the warranty obligations by remedying any material or manufacturing
faults free of charge at SOUNDSATION’s discretion either by repair or by exchanging individual
parts or the entire appliance. Any defective parts removed from a product during the course of a
warranty claim shall become the property of SOUNDSATION.
While under warranty period, defective products may be returned to your local SOUNDSATION
dealer together with original proof of purchase. To avoid any damages in transit, please use the
original packaging if available. Alternatively you can send the product to SOUNDSATION SERVICE
CENTER – Via Enzo Ferrari , 10 – 62017 Porto Recanati - Italy . In order to send a product to service
center you need an RMA number. Shipping charges have to be covered by the owner of the prod-
uct.
For further information please visit www.soundsationmusic.com
13.WARNING
PLEASE READ CAREFULLY – EU and EEA (Norway, Iceland and Liechtenstein) only
This symbol indicates that this product is not to be disposed of with your household waste, ac-
cording to the WEEE Directive (2202/96/EC) and your national law.
This product should be handed over to a designated collection point, e.g., on an authorized one-
for-one basis when you buy a new similar product or to an authorized collection site for recycling
waste electrical and electronic equipment (WEEE).
Improper handling of this type of waste could have a possible negative impact on the environment
and human health due to potentially hazardous substances that are generally associated with EEE.
At the same time, your cooperation in the correct disposal of this product will contribute to the
effective usage of natural resources.
For more information about where you can drop off your waste equipment for recycling, please
contact your local city ofce, waste authority, approved WEEE scheme or your household waste
disposal service.