Sound Town CARPO-P Series User manual

2023 SOUNDTOWN // Features and specifications are subject to change and or improvement without notice.
PRODUCT MANUAL
CARPO-P Series
Passive Column Array Loudspeaker
CARPO-P3
(By Pair)
CARPO-P6
(By Pair)
CARPO-P12
(By Piece)

IMPORTANT SAFETY INSTRUCTIONS
1. Read all safety and operating instructions before using this product.
2. All safety and operating instructions should be kept for future reference.
3. Read and understand all warnings listed on the operating instructions.
4. Follow all operating instructions to operate this product.
5. This product should not be used near water, i.e. Bathtub, sink, swimming pool, web basement etc.
6. Only use dry cloth to clean this product.
7. Do not block any ventilation openings, it should not be placed flat against a wall or placed in a built-in
enclosure that will impede the flow of cooling air.
8. Do not install this product near any heat sources, such as, radiators, heat registers, stove or other apparatus
(including heat producing amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The side
blade or the third prong are provided for your safety if the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord being walked on or pinched particularly at Plugs, convenience receptacles and the
point where they exit from the apparatus. Do not break the ground pin of the power supply cord.
11. Only use attachments specified by the manufacturer.
12. Use only the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus.
When a cart is used use caution when moving cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Care should be taken so that objects do not fall and liquids are not spilled into the unit through the ventilation
ports or any other openings.
15. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way; such as, power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been
dropped.
16. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
17. Correct disposal of this product: This symbol indicates that this product must not be disposed of with house-
hold waste, according to the national law. This product should be take to a collection center licensed for the
recycling of waste electrical and electronic equipment. The mishandling of this type of waste could have a
possible negative impact on the environment and human health due to potentially hazardous substances.
At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use
natural resources. For more information about where you can take your waste equipment for recycling,
please contact your local city office, or your household waste collection service.
In the package
AB
CD
CARPO-P3
2
2
4
4
2
8
1
ITEM
A: Column Array Loudspeaker
B: U Bracket
M8x25 Machine Screw
M6x18 Machine Screw
C: Extension Plate
M8x25 Machine Screw
D: User Manual
Optional Accessories (Sold Separately)
D
I
L
D
B
V
S
O
CARPO-P6
2
2
4
4
2
8
1
CARPO-P12
1
1
2
2
0
0
1
CARPO-PFF
(Flying Frame)
CWB-1A-PAIR
(Ominimount Bracket)

Installation
1. Standard Wall Mount
(With the U bracket included in the package)
2. Optional Omnimount Wall Mount''
(Optional omnimount bracket CWB-1A-PAIR available separately)
3. Extension
For CARPO-P3 and CARPO-P6 only.
STEP 1: Remove the M6 and M8 locating inserts
from the cabinet as shown in Fig. 1
STEP 2: Align the U bracket with the screw holes
and use the included M8x25 machine screws to fix
it to both side on the cabinet
STEP 3: Insert the included M6x18 machine screws
through the curved slots on the U bracket into the
screw holes but do not tighten them.
STEP 4: Adjust the U bracket to your desired angle
and then tighten the M6x18 screws on both side.
M8x25
M6x18
Fig. 1
Vertical -45 ~45
oo
adjustable
Refer to CWB-1A user manual for
installation procedures.
Vertical 0 ~10
oo
adjustable
Horizontal -90 ~90
oo
adjustable
Fig. 2
Fig. 3
STEP 1: Remove all the M8 locating inserts (A,B,C&D)
from the both upper and lower cabinet as shown
in Fig. 3
STEP 2: Align the extension plate with the screw holes
on the upper cabinet (point A&B) and use the included
M8x25 machine screws to fix it to cabinet
STEP 3: Insert another M8x25 machine screw through
the curved slots on the extension plate into the screw hole
(point D) but do not tighten it
STEP 4: Determine the angle between the two cabinets,
(0 , 10 and 20 on choice), adjust the lower cabinet until
oo o
the point C lines up with the hole marked with the correct
angle you choosed. Then fix it with a M8x25 screw
STEP 5: Tighten the screw on point D
A
B
C
D
4. Flying Frame
Optional flying frame CARPO-PFF available separately.

Specifications
How can we help you?
CONTACT OUR US-BASED SUPPORT TEAM
Simple or complex, your questions are important to us. For service, support
or more information, please contact the Sound Town support team:
Email: [email protected]
MODEL
Configuration
LF Driver
HF Driver
Dispersion
Input Impedance
RMS Power
Program Power
Frequency Response
Sensitivity
SPL
Connector
Mounting Hardware
Enclosure
Color
Grille
Dimensions (W x D x H)
Net Weight
CARPO-P3
2 x 5" Column
2 x 5"
2 x 0.75"
120 x 20 (H x V)
oo
12 Ω
250W
500W
92Hz~20K Hz
94dB, 1W @ 1m
122dB (Peak)
Speakon & Barrier Strip
U Bracket, Optional Omnimount Bracket, Optional Flying Frame
Plywood with Texture Coating
Black/ White
Powder-coated marine-grade metal
6.5" x 8.5" x 21.3"
Lbs??
CARPO-P6
4 x 5" Column
4 x 5"
2 x 0.75"
8Ω
450W
900W
90Hz~20K Hz
96dB, 1W @ 1m
124dB (Peak)
6.5" x 8.5" x 31.5"
Lbs??
CARPO-P12
6 x 5" Column
6 x 5"
2 x 0.75"
8Ω
650W
1300W
90Hz~20K Hz
97dB, 1W @ 1m
126dB (Peak)
6.5" x 8.5" x 41.7"
Lbs??