6
USING YOUR APPLIANCE
BEFORE FIRST USE
1. Remove the speaker from the box.
2. Remove any packaging from the
product.
3. Retain all packaging until you have
checked and counted all the parts and
contents against the parts list.
4. Dispose of the packaging in a
responsible manner.
CHARGING THE SPEAKER
To charge the Fabric Bluetooth Speaker,
connect the supplied micro USB cable to the
USB charging port and the other end to your
computer or USB charging device.
The LED light at the front of the unit will
ash red to indicate the speaker is charging.
Make sure to charge for at least 4 hours
before using the Speaker for the rst time.
PAIRING A SPEAKER WITH PHONE /
BLUETOOTH ENABLED DEVICE
1. Turn on the Bluetooth speaker.
2. Turn on your Bluetooth enabled device
and activate the Bluetooth function.
3. Search for the Bluetooth device,
“A58074” will show up.
4. If required, enter the password ‘0000’
to conrm and nalize pairing.
5. Your Speaker should now be paired
with your device. The LED light at
the front of the unit will ash blue to
indicate the pairing was successful.
TURNING ON YOUR SPEAKER
To turn on your speaker, ick the On/O
switch onto the ON position by sliding it
from left to right. You will nd this switch
inside the protective cover at the back of
the unit, next to the USB, Micro-SD and AUX
ports.
To turn the speaker o, ick this switch
back the other way to return it to the OFF
position.
MODE SELECTION
This speaker supports playback through
Bluetooth, from TF/SD or USB external
storage devices.
Press the ‘M’ key repeatedly to cycle
through the speaker’s available playback
modes until you reach your desired mode.
PLAYING MUSIC
Play/Pause: To begin playback, press
the Play/Pause button. The speaker will
automatically begin playing the selected
song or audio track. To pause playback at
any time, press the button again while the
speaker is in operation
Skipping Tracks: To skip to the next track
on your playlist, press the NEXT button. To
skip back to the previous track, press the
PREV button.
Hands-Free Calls: This device is equipped
with a built-in mic, which allows you to
make and receive hands-free calls.
To answer an incoming call hands-free
using your speaker, press the Play/Pause
button while on Bluetooth mode. The
sound from your call will automatically be
redirected to your speaker.
Volume Up / Volume Down: To increase
playback volume, short press the ‘+’ key
repeatedly until you have reached your
desired volume.
To decrease playback volume, short press
the ‘-’ key repeatedly until you have reached
your desired volume.
