Sound Tube TS81-EZ Series Configuration guide

TS81-EZ
Donotspecorinstallspeakernearsupportbeam,ventilationductor
otherstructurethatmayinterferewithspeakerfunctionordispersion.
Warning
© 2019 SoundTube Entertainment, Inc. All rightsreserved. PN INS-TS81-EZ Rev 03.20.19
Warning
SoundTubespeakersmustbeinstalledbyaprofessionalaudioinstaller/contractor.Forsafetyandfor
optimumaudioperformance,installermustfollowalldirectionsissuedbySoundTubeEntertainment.
Box contents
1 Speaker
1 Conduit Connector (attached to speaker)
Wire Nuts
Install Instructions For:
TS81-EZ-BK & TS81-EZ-WH | Drop-In tile speaker
913.663.5600 | www.soundtube.com | www.mseaudio.com |[email protected]

2. Determine the location to
install the speaker. Be sure
to ask your installer to
ensure that the ceiling can
support the weight of the
speaker (5 kg / 11 lbs)
before installation.
1. Unpack speaker.
3. Using the included wire nuts
and the wiring table below,
connect the input source to
the desired tap wires.
4. Cap the three unused wire
ends with three wire nuts
and tape the wires
together. Push all three
wires into the speaker
cabinet.
5. If using conduit, install ex
conduit into the conduit
connector.
6. Place speaker in the tile grid. 7. Done!
Instructions 913.663.5600 | www.soundtube.com
www.mseaudio.com |[email protected]
Brown Magenta Orange Yellow
Black
100V COM
10W
10W
5W
5W
2.5W
0.63W 0.32W
2.5W
1.25W
1.25W
0.16W
*
COM
COM
70V
25V
+ Positive
- Negative
To Next Speaker
+_
Amp
Junction Box
+_
_
+
_
_
_Wire Nut
_Wire Nut
Recommend #18 - #14 AWG
wire size for most installations.
Wire size should always be calculated
based on the system conguration
and distance between speakers
Frequency Response:
180 Hz - 20 kHz