SoundEar 3-300 User manual

MICRO-PC Manual – uK
MOdel 300
MOdel 310
MOdel 320
MOdel 310xl
SoundEar®3
VeRSIOn: 5.2.4

2
INTRODUCTION 3
CHOOSING YOUR CONNECTION 3
SET A NEW SITE ID 4
CONFIGURE YOUR SOUNDEAR®3 DEVICE 6
CONNECTING TO EITHER CLOUD BROKER OR LOCAL BROKER 8
CONNECTING THE DEVICE TO THE SOUNDEAR® MICRO PC 11
VISUAL START-UP GUIDELINE FOR THE MICRO PC CONNECTION: 14
START COLLECTING MEASUREMENTS 15
CHANGING CONFIGURATION ON AN ALREADY CONFIGURED DEVICE 19
REMOVE A DEVICE FROM THE SOFTWARE 20
WIRELESS 21
DEVICES 23
TaBle OF COnTenTS

3
SoundEar®3 – manual RETURN TO TABLE OF CONTENTS
InTROduCTIOn
1. CLOUD BROKER:
2. LOCAL BROKER:
Before setting up your SoundEar®3 system, you should decide how you want your SoundEar®3 device(s)
to connect to the SoundEar® software. You have two options for using the SoundEar® Micro PC:

RETURN TO TABLE OF CONTENTS SoundEar®3 – manual
4
-

5
SoundEar®3 – manual RETURN TO TABLE OF CONTENTS
-
-

RETURN TO TABLE OF CONTENTS SoundEar®3 – manual
6
Connect the device directly to the PC, using the micro USB port in the SoundEar®3 and the USB A port on your PC.
-

7
SoundEar®3 – manual RETURN TO TABLE OF CONTENTS
1. NAME:
2. UNIQUE ID:
3. LOCATION:
4. ALARM THRESHOLD:
5. WI-FI:
6. DHCP:
7. SITE ID:
8. LOCAL BROKER:

RETURN TO TABLE OF CONTENTS SoundEar®3 – manual
8
nOTe!
-
-
-
-
-

9
SoundEar®3 – manual RETURN TO TABLE OF CONTENTS
-
-
-
-
-

RETURN TO TABLE OF CONTENTS SoundEar®3 – manual
10
nOTe!
-

11
SoundEar®3 – manual RETURN TO TABLE OF CONTENTS
-
Id: xxxx
Micro PC
Id: xxxx

RETURN TO TABLE OF CONTENTS SoundEar®3 – manual
12

13
SoundEar®3 – manual RetuRn to table of Contents
CONNECTING THE DEVICE TO THE SOUNDEAR® MICRO PC
CONNECTING THE MICRO PC
2. Connect the power adapter to the micro PC and the
adapter to a power socket. The micro PC will supply the
SoundEar®3 with power.
NOTE: When using an ethernet cable to connect
to a local network, connect the network cable to
the micro PC.

RETURN TO TABLE OF CONTENTS SoundEar®3 – manual
14
COnneCTIOn STaTuS
To determine where you are in the process of connecting the micro PC,
you can use the lights on the micro PC to guide you:
Red light: Power on
Yellow light: Connection status

15
SoundEar®3 – manual RETURN TO TABLE OF CONTENTS
When you have configured your SoundEar®3 device(s), you can start collecting measurements via the software.

RETURN TO TABLE OF CONTENTS SoundEar®3 – manual
16
nOTe:
-

17
SoundEar®3 – manual RETURN TO TABLE OF CONTENTS

RETURN TO TABLE OF CONTENTS SoundEar®3 – manual
18
-
nOTe!
IMPORTanT:

19
SoundEar®3 – manual RETURN TO TABLE OF CONTENTS
You can change your Wi-Fi configuration any time via the software.

RETURN TO TABLE OF CONTENTS SoundEar®3 – manual
20
-
-
Other manuals for 3-300
1
This manual suits for next models
3
Table of contents