Southbend KELT-100 User manual

Job Item#
www.yatesgd.com www.yatesgraphicdesign.com
Form KELT Rev 1 (November/2010)
ElEctric StEam
tilting KEttlE
Model CapaCity
KELT-20 20 Gallon 76 Liter
KELT-30 30 Gallon 114 Liter
KELT-40 40 Gallon 152 Liter
KELT-60 60 Gallon 227 Liter
KELT-80 80 Gallon 303 Liter
KELT-100 100 Gallon 379 Liter
SPECIFICATIONS:
Shall be a Southbend Model________________________ ,
self-generating, electric tilting kettle. A double wall kettle interior
shall form a steam jacket around the lower 2/3 of the kettle. The
jacket enclosure shall contain distilled water which is factory
sealed. The bottom of the kettle shall be of hemispherical design
for superior heat circulation.
The console shall be drip proof, stainless steel clad and shall
be supported on all welded, 1-5/8” (41 mm) diameter stainless
steel pipe frame and legs tted with 4 hole adjustable anged
feet for securing to oor.
The kettle shall pivot on a trunnion connected to the tilt
mechanism and the out-bore bearing connected to the frame
and shall permit the kettle to tilt forward a full 90° for complete
emptying. The tilt mechanism shall be self locking for positive
stop action.
Construction shall be all welded #4 nish stainless steel, type
304. The interior on the 20, 30 and 40 gallon models shall be
standard stainless stel typ 316 for high acid content cooking. The
controls shall be integrally mounted and shall include a power
switch, thermostat, pilot light, low water light, vacuum/pressure
gauge, safety relief valve, and low water shut off.
The kettle shall be standard with removable elements. The kettle
shall operate in a temperature range of 165°F to 285°F (74°C to
140°C) at a maximum pressure of 50 psi (345kPa).
OPERATION SHALL BE BY:
Electrically, self-generating closed steam system operating at 50 psi
equipped for operation on:
 208 VAC, 1 Phase, 50/60 Hz. (20 and 30 gallon only)
 208 VAC, 3 Phase, 50/60 Hz.
 240 VAC, 1 Phase, 50/60 Hz. (20 and 30 gallon only)
 240 VAC, 3 Phase, 50/60 Hz.
OPTIONAL ITEMS AT EXTRA COST:
 Type 316 stainless steel liner (60, 80 and 100 gallon models)
 2” (50 mm) draw-off valve (TVT-2)
 3” (76 mm) draw-off valve (TVT-3)
 2” (50 mm) dairy valve (DDO-2T)
 3” (76 mm) dairy valve (DDO-3T)
 24 kw on 40, 60, 80 gallon
 33 kw on 60, 80, 100 gallon
 220 VAC, 1 Phase, 50/60 Hz (20 and 30 gallon only)
 220 VAC, 3 Phase, 50/60 Hz.
 380 VAC, 3 Phase, 50/60 Hz.
 415 VAC, 3 Phase, 50/60 Hz.
 480 VAC, 3 Phase, 50/60 Hz.
 600 VAC, 3 Phase, 50/60 Hz.
 380/220 VAC, 3 Phase, 50/60 Hz. 4 wire
 415/240 VAC, 3 Phase, 50/60 Hz. 4 wire
 Spring assist hinged cover for 20, 30 or 40 gallon models (CH-)
 Etched gallon markings (GM-)
 Etched litre markings(LM-)
 Correctional package
ACCESSORIES:
 One piece lift off cover (C-)
 Triple basket assembly (TBA-)
 Perforated strainer for draw-off valve (TPS-)
 Solid stainless steel disc for draw-off valve (TSS-)
 Graduated measuring strip (CMS-)
 Strainer hook (SH)
 Single pantry faucet with swing spout (SF-18)
 Double pantry faucet with swing spout (DF-18)
 Pan support (PC-1)
 Pour lip strainer (TKS-)
 Draw-off valve hose kit (DVHK-2)
 Calibrated thermostat dial “F”
 Calibrated thermostat dial “C”
Kettle shown with optional Spring Assist
Cover and Draw-off valve

1100 Old Honeycutt Road, Fuquay-Varina, NC 27526
[phone] www.southbendnc.com
Models:
Form KELT Rev 1 (November/2010)
 KELT-20  KELT-30  KELT-40  KELT-60  KELT-80  KELT-100
INTENDED FOR COMMERCIAL USE ONLY.
NOT FOR HOUSEHOLD USE.
Model CapaCity Units a B C d e F G H J(2”) J(3”) K(2”) K(3”) l M
KELT-20 20 gallons
(76 liters)
in
(mm)
21”
(533)
18”
(457)
38”
(965)
36”
(914)
15”
(381)
18”
(457)
14”
(356)
19.25”
(489)
14.75”
(375)
15.5”
(394)
18”
(457)
17.5”
(445) N/A 63.5” (1613)
KELT-30 30 gallons
(114 liters)
in
(mm)
24”
(610)
20”
(508)
38”
(965)
39”
(990)
16.5”
(419)
19”
(483)
12.38”
(314)
19.25”
(489)
16.75”
(425)
17.25”
(438)
16”
(406)
15.5”
(394) N/A 66.5” (1689)
KELT-40 40 gallons
(152 liters)
in
(mm)
26”
(660)
22.5”
(572)
38”
(965)
41”
(1041)
17.5”
(445)
23”
(584)
10”
(254)
20.25”
(514)
17.5”
(445)
18.5”
(470)
13.5”
(343)
13”
(330) N/A 68.5” (1740)
KELT-60 60 gallons
(227 liters)
in
(mm)
29.5”
(749)
26”
(660)
42”
(1067)
44.5”
(1130)
19.13”
(486)
24”
(610)
11”
(280)
22.25”
(565)
19.5”
(495)
20.75”
(527)
14”
(356)
13.5”
(343)
10.5”
(267)
76”
(1930)
KELT-80 80 gallons
(303 liters)
in
(mm)
33”
(838)
28”
(711)
45”
(1143)
48”
(1219)
20.88”
(530)
27”
(686)
12.63”
(321)
23.75”
(603)
20.25”
(514)
21.25”
(540)
15”
(381)
14.5”
(368)
12”
(305)
82.5”
(2096)
KELT-100 100 gallons
(379 liters)
in
(mm)
35.5”
(902)
29.75”
(755)
48.75”
(1238)
49.5”
(1257)
22.25”
(565)
32”
(813)
14.5”
(368)
25.25”
(641)
20.25”
(514)
21.25”
(540)
18.75”
(476)
18.25”
(464)
14”
(356)
88.5”
(2248)
ELECTRICAL CHARACTERISTICS
DIMENSIONS
aMps per line
KW pHase 208V 220V 240V 380V 415V 480V 600V
12 1 57.7 54.5 50.0 N/A N/A N/A N/A
3 33.3 31.5 28.9 18.2 16.7 14.4 11.6
15 1 72.1 68.2 62.5 N/A N/A N/A N/A
3 41.6 39.4 36.1 22.8 20.9 18.0 14.5
18 3 50.0 47.2 43.3 27.3 25.0 21.7 21.7
24 3 66.6 63.0 57.7 36.5 33.4 28.9 23.1
33 3 91.6 86.6 79.4 50.1 45.9 39.7 31.8
aVailaBle KW
Model standard optional
KELT-20 12 N/A
KELT-30 15 N/A
KELT-40 18 24
KELT-60 18 24 or 33
KELT-80 18 24 or 33
KELT-100 24 33
SERVICE CONNECTIONS
– ELECTRICAL CONNECTION : Unless otherwise specied, eld wire electrical connection to be 120 volts, 60 Hz, 1 phase with grounding wire. Unit
furnished with 6’ cord and 3 prong plug. Total maximum amps 4.0.
– COLD WATER: 3/8” (10 mm) tubing to faucet (optional)
– HOT WATER: 3/8” (10 mm) tubing to faucet (optional)
Model sHippinG WeiGHt MiniMUM ClearanCe
KELT-20 296 lbs. [134 kg]
SIDES
BACK
0” [0 mm]
0” [0 mm]
KELT-30 313 lbs. [142 kg]
KELT-40 352 lbs. [160 kg]
KELT-60 417 lbs. [189 kg]
KELT-80 520 lbs. [236 kg]
KELT-100 630 lbs. [286 kg]