6First Steps
Pairing
Before using your Headset you will need to pair it to
your Bluetooth mobile phone. You will need to repeat
this process if you want to use your Headset with ano-
ther mobile phone. Pairing is a feature of your
Bluetooth Headset that prevents anyone else eaves-
dropping on your phone conversations. This product
supports both the Headset and Hands-free profiles,
which ensures compatibility with a larger number of
Bluetooth mobile phone models. The addition of the
Hands-free profile offers access to a wider range of
phone functions.
1. Ensure the Headset is off (see below on how to turn
your headset on and off) and that the mobile phone with
which you wish to pair is not too far apart (less than 1
meter of separation will ensure most reliable pairing).
2. Put the mobile phone into pairing mode (see the instruc-
tions which came with your phone).
3. Press and hold the Multi-function Dial [1] for
about 5 seconds until the Headset Indicator Light
[2] alternates between red and green (you
will also hear a series of high tones). Now
the Headset is ready for pairing in
Headset mode.
4. If your mobile phone supports the Hands-free mode, just
briefly push once again the Multi-function Dial and the
Headset will attempt pairing in Hands-free mode (you will
hear a series of low tones). Briefly pushing the button will
allow you to alternate between Headset and Hands-free
modes. You now need to wait several seconds while both
devices attempt to pair.
5. If you are asked for a PIN number, note that the default
PIN number for the SouthWing Bluetooth Headset is 1111.
Please Note:
- If pairing is successful, the Headset
Indicator Light [2] will begin flashing green.
You can now start using your Headset.
