SpaceraiL Spacewarp Level 9.1 User manual

Instruction Manual Level 9.1

2
fg. 1
Freefall helix(enlargedview)
Helix(enlargedview)
Pendulum(enlargedview)
SpaceRail is a spectactular marble-run coaster that guarantees
high-speed action rides consisting of wild rotations, daring loop-
the-loops and spectactular swivel motions. These marble-run
coasters are an ultimate challenge for teenage and adult
enthusiasts alike.
Spacerails are available in several different sizes and levels of
difficulty. Try them all!.

3
Stairway(enlargedview)
Doublelooptunnel (enlargedview)
Funnel-shapedhelix(enlargedview)
Table of Contents
Figure1..................................................................................P. 2-3
Figure2-6..................................................................................P. 4
Parts List...................................................................................P. 5
Assemblyofthebaseplate&armholderB..............................P. 6
Assemblyofthearms andseesaws..........................................P. 7
Assemblyofthependulumandtheelevator.............................P. 8
Assemblyoftheelevator...........................................................P. 9
Assemblyofthefreefall helix.................................................P. 10
Locations of theelevatorrings....................................................E1
Installationofelevatorstand, gearboxandbaseplate...............E1
Assemblyofarmset D................................................................E1
Assemblyofthearms andarmsetC...........................................E2
Assemblyofshafts andarms......................................................E3
Assemblyofthestairway............................................................E4
Assemblyofshafts andarms......................................................E5
Positions of shafts andarms.......................................................E6
Rail assemblysteps...........................................................P. 11-16
Rail mountingandassemblyof theloops...............................P. 17
Assemblyofthedoublelooptunnel........................................P. 18
Assemblyofthefreefall helix(entries &exits)........................P. 18
Assemblyof theelevator(entryandexit) andrail mounting.....P. 19
Warnings.................................................................................P. 20

4
fg. 4(front)
fg. 3(left)
fg. 2(top)
fg. 6(back)fg. 5(right)
These images show the
SpaceRail Level 9.1
from different views.
They will be very useful
during assembly.

5
Pliers
Use2xC/LR14 batteries (not included)
Handlethecomponentswithcaretoprevent themfromgettinglost.
Tapemeasureorfoldingruler
Toolsforinstallation:
Partslist
[B1][B4]
[S2] 391mm [S3]300mm [S4]200mm [S5] 159mm [S6] 65mm [C3][S1] 600mm
[S1] Shaft 600mm [S2] Shaft 391mm [S3] Shaft 300mm [S4] Shaft 200mm [S5] Shaft 159mm [S6] Shaft 65mm [C3] Spacer
9x
147+x
2x
10x 11x 2x 2x 12x 15x
38x 9x 4x 2x 3x
108+x 168+x 265+x 375+x 300+x
8x 20x 7x 19x 8x 1x
[A1] [A2] [A3] [A4] [A5] [A6]
[A1] Arm [A2] Armholder A [A3] Armtube [A4] Armholder B [A5] Armwrench [A6] Rail stand
[G1]
[B2]
[Ex2][C4] [Ex5] [Ex6]
[B3] [E4] [G2] [R2][R1] 68.000mm
[E1] [E2] [E3] [Ex1] [P1]
[G1] Gear Box [E1] Elevator helix [E2] Elevator ring [E3] Elevator cover [P1] Junction
[Ex1] Seesaw
[B2] Baseholder (big) [B3] Baseholder(small) [E4] Elevatorstand [R1] Rail (68,000mm) [G2] Gearboxsocket [R2] Rail joiningSteel balls
[Ex7]
[Ex2] Pendulum[C4] Shaft cap [Ex5] Ball catcher [Ex6] Counterweight [Ex7] Pendulumtrayfor steel balls [B1] Baseplate[B4] Doublebaseplate
Parts List
13x
2x 1x 1x 1x 1x 1x 13x

6
1
2
Assemblyofbaseplate
1. Assemblethebaseplate(13
pieces). Payattentiontoa
properseatingoftheclipsand
slots (fg. 01-1)
2. Fastenthebaseholders (B2+
B3) inthecorrect positions
(fg. 01-2)
3. Assemblethebaseplate[B4] of
thesecondfoor(fg. 01-3)
Assemblyof armsetB
Forthis ball rollercoaster56
special armsets arerequiredwhich
consist exclusivelyof [A4] arm
holdersB(fg. 02). Onpages E1-E6
thesecomponents aretermed„Arm
SetB“
Assembly of base plate & arm set B
01-1
01-2
01-3
02
[B3] Baseholder (small)
[B2] Baseholder (big)
[B1] Baseplate
[B4] Doublebaseplate
Top-downview
Top-downview
[A3] Armtube
[A5] Armwrench [A4] ArmholderB
[A4] ArmholderB
Firstfloor
Secondfloor
Thesearmsetsconsistexclusivelyof
[A4] armholders B

7
3
4
Assembly of arms & seesaws
[A4] ArmholderB
[A2] ArmholderA
[A3] Armtube
[A5] Armwrench
[Ex1] Seesaw
[A6] Rail stand
[A4] ArmholderB
Holeprofle
Holeprofle
Holeprofle
Holeprofle
[A3] Armtube
Mountlefthandside
Mountrighthandside
Install1pc
1Stückaufbauen
Install 1pc
Length: 75mm
[A1] Arm
Note: When turningthearmwrench, makesurenot
tochangetheright positionofthearm
Insertshaftinto thearmholderB. Donot
applyforceinordertoavoiddamages
Note: Whenturningthearmwrench, makesurenot to
changetherightpositionof thearm
Adjustseesawafterassemby
Note: Whenturningthearmwrench, makesurenot
tochangetheright positionofthearm
Refertotheassemblyof arms(pageE1-E6)
Assemblyofarms
1. Assemblethearmsaccording
tofg. 03
Caution: Armholder A(A2) +
armholder B(A4) aredifferent
107 arms areneededfor the
completeset-up
2. Insert thearmwrenchintothe
armholderAandturnitby90
degrees tofxthearm(fg. 04)
Note: Tomodifytheangleof the
arm, releasethefxationfrst
3. Attachthearmtotheshaft
(fg. 05): Insert shaft into the
armholderBandturnthearm
wrenchby90 degrees tof xthe
arm(fg. 05)
Note: Tomodifytheangleof the
arm, releasethefxationfrst
Assemblyofseesaw
Insert 2x75mmrail intotheholes
of theseesaw. Thenattachtherail
standtotheseesaw(fg. 06)
Attachseesawtotheshaft
(fg. 07+08)
1. Connect seesawwitharmholder
B(fg. 07)
2. AttacharmholderBtotheshaft
(fg. 08). Refertotheassembly
of arms(E1-E6). Insertarm
wrenchintoarmholderandturn
it by90degrees (fg. 03).
Note: Tomodifytheangleof the
arm, releasethefxationfrst
03
04
06
07 08
05
Top-downview
Top-downview

8
Assembly of pendulum and elevator
5
6
Installationofthependulum
Connect attachment parts with
pendulum(fg. 09)
Note: Tomodifythepositionof arm
holderB, releasethefxationfrst
Installationoftheelevator
1. Insertthe300mmshaftintothe
gearbox(fg. 10-1)
2. Slidetheelevator(12 pcs) onto
theshaft (fg. 10-2). Insert shaft
intobase(fg. 10-1)
Pleasenotethecorrectdirection
ofrotation
3. Insert3further300mmshafts
intotheexactpre-defned
positionsonthegearbox(fg.
10-3)
4. Allowthe3shaftstosnapinto
place(pic. 10-4). Takecarethat
theelevatorringsareproperly
located. SeepageE1forthe
properlocationsof theelevator
rings
5. Insert the4 shafts intothe
elevatorcover(fg. 10-5). Take
carethattheshaftsareproperly
located
6. Nowattachrail stands [A6]to
theelevatorring(fg. 10-6)
09
10-1
10-2
10-4
10-5
10-6
10-3
[A5] Armwrench
[Ex5] Ball catcher
[S3] Shaft 300mm
[G1] Antrieb
[G1] Gearbox
[E2] Elevatorring
[E3] Elevatorcover
[A6] Rail stand
[A6] Rail stand
[A6] Rail stand
[A6] Rail stand
[E1] Elevator helix
[Ex2] Pendulum
[A5] Armwrench
[S6] Shaft 65mm
[S6] Shaft 65mm
[Ex6] Counterweight
[A5] Armwrench
[A4] ArmholderB
[S1] Shaft 600mm
[A4] ArmholderB
[A4] ArmholderB
[S4] Shaft 200mm
[S3] Shaft 300mm
Referto theassemblyof arms (fg. 05)
Avoidthat thereisagap
betweengearboxand
elevatorhelix. Otherwise
theelevatorwill not
operateproperly
Pleasenotethecorrect
directionofrotation
Makesureconvexredpartspointup
andeverythingiscorrectlyseated
Thecounterweightpositionis
adjustableontheshaftif the
pendulumdoesnotworkproperly
Note:Tomodifythepositionof
counterweight, releasethe
fxationfrst

Pleasenotethecorrectdirection
ofrotation
Makesureconvexredpartspointupandeverything
iscorrectlyseated
9
Assembly of the elevator
7
Installationoftheelevator
1. Insert the391mmshaft into
thegearbox(fg. 11-1)
2. Slidetheelevator(16pcs)
ontotheshaft(fg. 11-2)
3. Insert3 further391mmshafts
intotheexact pre-defned
positionsonthegearbox
(fg. 11-3)
4. Allowthe3shafts tosnapinto
place(pic. 11-4). Takecare
thattheelevatorrings are
properlylocated. SeepageE1
fortheproperlocations of the
elevatorrings
5. Insert the4 shafts intothe
elevatorcover(fg. 11-5).
Takecarethattheshafts are
properlylocated
6. Nowattachrail stands [A6] to
theelevatorring(fg. 10-6)
11-1
11-2
11-4
11-5 11-6
11-3
[E2] Elevatorring
[E2] Elevatorring
[E3] Elevatorcover
[A6] Rail stand
[A6] Rail stand
[A6] Rail stand
[A6] Rail stand
[S2] Shaft 391mm
[S2] Shaft 391mm
[G1] Gearbox
[E1] Elevator helix
Avoidthat thereis agapbetween
gearboxandelevatorhelix. Otherwise
theelevatorwill not operateproperly

10
12-1
12-2 12-3
12-4
12-7
12-5
12-6
12-8
12-8 12-9
12-9
8
Installationof thefree
fall helix
1. Attachspacer [C3] totheshaft
(fg. 12-1, 12-8). Insertthe
shaftincl. spacerandshaft
cap[C4] intotheelevator
cover(fg. 12-1)
2. Slidetheelevator(10 pcs)
ontotheshaft(fg. 12-2)
3. Insert3 further300mmshafts
intotheexact pre-defned
positionsonthegearbox
(fg. 12-3)
4. Allowthe3shafts tosnapinto
place(pic. 12-4). Takecare
thattheelevatorrings are
properlylocated. Seefg. 12-9
fortheproperlocations of the
elevatorrings
5. Insert the4 shafts intothe
elevatorcover(fg. 12-5).
Takecarethattheshafts are
properlylocated
6. Nowattachrail stands [A6] to
theelevatorring(fg. 12-6)
7. Insert theelevatorstand(E4)
intothering(fg. 12-7)
[S3] Shaft 300mm
[S3] Shaft 300mm
[C3]Spacer
Pleasenotethecorrectdirection
ofrotation
Takecarethatthe
elevatorringsare
properlylocated
(fg. 12-9, picture
showsascale
of1:1)
Makesureconvexredpartspointup
andeverythingiscorrectlyseated
[C4]Shaftcap
[S3] Shaft 300mm
Assembly of the free fall helix
[A6] Rail stand
[E4] Elevator stand
[E2] Aufzugring
[E2] Elevator ring
[A6] Rail stand
[A6] Rail stand
Takecarethat
thespacer[C3] is
properlylocated
(fg. 12-8, picture
showsascale
of1:1)

11
25
26
26-1 26-2 26-3
16
Rail assemblysteps
Thisball rollercoasterprovides 6
exits (start) and9 entries (end).
Pleasenotefg. 25-36andthe
illustrationsonpage2-4during
assembly
Install rail standstogetherwith
therails (page17, fg. 40)
1. Fromsecondfoorelevatorexit
BI3(Start) tojunctionA
(fg. 26, 26-1)
2. FromthejunctionAexit (start)
viathedoublelooptunnel to
thefrst foorelevatorentryBJ1
(end) (fg. 25+26, 26-3+26-2)
Assemblerail asshownontheright
Elevator(1stfoor)
BackFront
JunctionA
Fromsecondfoor elevatorexitBI3(start) tojunctionA
FromjunctionA(start) viadoublelooptunnel tofrst foor
elevatorentryBJ1
Don´tcut
Elevator(2ndfoor)
Assembly of rails
Letters andnumbers (e.g. H-2) showthecorrect positions ofshafts andarms
Install 2x7cmrails(fg. 26+26-1) Install 2x560cmrails (fg. 26+25, 26-3+26-2)
Caution:Firstinstall innerlooptunnel, thencontinuewithouterlooptunnel
Duetothelongdistance, theinstallationofthissectionisdividedinto2assemblysteps(pleaserefertofg.25+26)

12
Assembly of rails
Rail assemblysteps
3. PleasenotepageE4for
stairwayinstallation
4. Fromstairway(part B) to
seesawA(fg. 27, 27-1+27-2)
5. FromseesawBtofrst foor
elevatorentryBJ1(fg. 27,
27-3)
6. FromseesawAtoseesawB
(fg. 28, 28-1)
7. Fromthe„bypassslip“ tofrst
foorelevatorentryBJ2
(fg. 28, 28-2)
Assemblerail as shownontheright
27
27-1
28-1
27-2
28-2
27-3
28-3
28
Attachtheseesawsasshown
Attachtheseesawsasshown
Pleasenotefg. 27, 27-1 andpageE4for
stairwayinstallation
Install 2x46cmrails (fg. 28+28-1) Install 2x93cmrails (fg. 28+28-2)
Install 2 x90cmrails (fg. 27+27-2) Install 2x100cmrails (fg. 27+27-3)
SeesawA
SeesawA SeesawB
SeesawB
Installationof stairwayB
FromseesawAtoseesawB Fromthe„bypass slip“ tofrst foorelevatorentryBJ2
Fromstairway(partB) toseesawA FromseesawBtofrst foorelevatorentryBJ1
16

13
Assembly of rails
Rail assemblysteps
8. PleasenotepageE4for
stairwayinstallation
9. Fromshaft/armAE-8 to
stairway(fg. 29, 29-2)
10.Fromfreefall helix(exit A) to
frst foorelevatorentryBJ2
(fg. 29, 29-3)
11. FromthejunctionBexit tothe
funnel-shapedhelix(fg. 30,
30-1, 30-2)
12.Fromthe„bypassslip“to
junctionBentry(fg. 30, 30-3)
Assemblerail as shownontheright
30
29
Pleasenotefg. 29, 29-1andpageE4
for stairwayinstallation
Install 2x475cmrails (fg. 30, 30-1, 30-2) Install 2x55cmrails (fg. 30, 30-3)
Install 1x550cmrails(fg. 29+29-2). Pleasenotepage
E4forstairwayinstallation(fg.24) Install 2x75cmrails(fg. 29+29-3)
Exit A
Installationof stairway
FromthejunctionBexit tothefunnel-shapedhelix Fromthe„bypass slip“tojunctionBentry
Fromshaft/armAE-8 tostairway Fromfreefall helix(exitA) tofrstfoorelevatorentryBJ2
29-1
30-1
29-2
30-2
29-3
30-3
JunctionB
16

14
Assembly of rails
31
32
Install 2x86cmrails (fg. 31, 31-1, 31-2)
Install 2x19cmrails (fg. 32, 32-1) Install 2x194cmrails (fg. 32, 32-2, 32-3)
Install 2x16cmrails (fg. 31, 31-3)
JunctionC
Fromsecondfoorelevatorexit BI3to„bypass slip“
FromjunctionCtopendulum FromjunctionCtoshaft/armAE-9
Fromsecondfoorelevatorexit BI3tojunctionC
Rail assemblysteps
13.Fromsecondfoorelevator
exitBI3to„bypassslip“
(fg. 31, 31-1, 31-2)
14.Fromsecondfoorelevator
exitBI3tojunctionC(fg. 31,
31-3)
15.FromjunctionCtopendulum
(fg. 32, 32-1)
16.FromjunctionCtoshaft/arm
AE-9 (fg. 32, 32-2, 32-3)
Assemblerail asshownontheright
31-1
32-1
31-2
32-2
31-3
32-3
JunctionC Pendulum
16

15
Assembly of rails
33
34
Install 2x71cmrails (fg. 33, 33-1, 33-2)
Install 2x54cmrails(fg. 34, 34-1) Install 1 x7cmrail and1x5cmrail toassembleexitB
of freefall helix(fg. 34, 34-2, 34-3)
Caution: Outerrail shouldbelongerthaninnerrail to
ensurethesteel ballsrunningsmoothly(fg. 34-3)
Install 2x21cmrails(fg. 33, 33-3)
Secondfoorelevator
Secondfoorelevator
Firstfoorelevator
Firstfoorelevator
Fromfrstfoorelevatorexit BJ3 tosecondfoor
elevatorentryBI1
Fromshaft/armF-2tofrstfoorelevatorentryBJ2 Exit Bof freefall helix
Fromfrstfoorelevatorexit BJ2 tosecondfoor
elevatorentryBI2
Rail assemblysteps
17. Fromfrst foorelevatorexit
BJ3tosecondfoorelevator
entryBI1 (fg.33, 33-1, 33-2)
18.Fromfrst foorelevatorexit
BJ2tosecondfoorelevator
entryBI2(fg.33, 33-3)
19.Fromshaft/armF-2tofrst
foorelevatorentryBJ2
(fg. 34, 34-1)
20.Install 1 x7cmrail and1 x
5cmrail toassembleexit Bof
freefall helix(fg. 34, 34-2,
34-3)
Caution: Outer rail shouldbe
longerthaninner rail toensure
thesteel balls runningsmoothly
(fg. 34-3)
Assemblerail asshownontheright
33-1
34-1
33-2
34-2
33-3
34-3
ExitA
16

16
Assembly of rails
16
Rail assemblysteps
21.Fromfrst foorelevatorexit
BJ3tosecondfoorelevator
entryBI2(fg. 35, 35-1)
22.FromjunctionBviatheloop
tofrst foorelevatorentryBJ1
(fg. 35, 35-2, 35-3)
Caution: Steepdownward
gradient! Attachfurther rail
stands toprevent steel balls
frommissingthetrack
23.FromjunctionAviathehelix
toentryAof thefreefall helix
(fg. 36, 36-1, 36-3)
24. Fromthetray[Ex7] toentryB
of freefall helix(fg. 36, 36-2)
Assemblerail asshownontheright
Install 2x188cmrails(fg. 35, 35-1)
Install 2x670cmrails (fg. 36, 36-1, 36-3) Install 2x66cmrails (fg. 36, 36-2)
Install 2x175cmrails(fg. 35, 35-2, 35-3)
JunctionB
AbzweigungA
JunctionA
FromfrstfoorelevatorexitBJ3to
secondfoorelevatorentryBI2 FromjunctionBviathelooptofrstfoorelevatorentryBJ1
FromjunctionAviathehelixtoentryAof thefreefall helix FromthetraytoentryBoffreefall helix
35
36
35-1
36-1
35-2
36-2
35-3
36-3
Caution:Steepdownwardgradient! Attachfurtherrail stands
topreventsteelballsfrommissingthetrack
Tray[Ex7]
EntryA
EingangB
EntryB

17
Assembly of rails and loop
17
Installationoftherails
Attachmentofrailstoarmsandshafts
(fg.37+38)
Attachrailtoarm(fg. 37)
Railjoining(fg.39)
Adjustandconnecttherails. Inserttherail
joinings[R2]intotheholesatthecenterof
therails(fg.39)
Informatonsaboutrail stands(fg.40)
Thedistancebetweenthearmsshouldbe
between8to10cmtoensurebeststability.
Whenthedistanceislarger, railstands[A6]
havetobeinstalled
Attachrailstandsinsteepsectionsand
elevatorentry/exitpointstoensurebest
stabilityoftherails
Steepsections(fg.41)
Install thearmsinaninclinedpositionto
eachothertocreatesteepsections, sothat
thesteel ballscanrunsmoothly(fg. 41)
Installationofaloop
Ensurethesteel ballsrunningsmoothly
(fg. 42)
Thediameteroftheouterloopshouldhave
twicethediameteroftheinnerloop
Importantinformationfortheassemblyof
loops(fg. 43)
Railshavetoformacirclethatremainsin
anuprightpositiontoensurethesteel balls
runningsmoothly(fg. 43)
Installationofaloop(fg. 44)
Whenmountingloops, thesecondloophas
tobesmallerthanthefrstlooptoensure
thesteelballsrunningsmoothly
Installationofpendulumtrayandjunction
(fg. 45-1+45-2)
Insertrail standsintothejunction(fg.45-1)
Simplycuttherailstothecorrectlength
(seeenlargedpictureontheright)
Insertrailsintothependulumtray(fg.45-2)
37 38
39
40
41
42 43 44
45-1
45-2
[R1] Rail
[R1] Rail
[R1] Rail
Height
[A6] Rail stand
[Ex7] Trayfor steel balls
[A6] Rail stand
[P1] Junction
Innerlooping Innerlooping
Outerlooping
[A1] Arm
[R2] Rail joining
18
Userail stands likerailwayties
Insertrails intoarm
Install thearmsinaninclinedposition
toeachothertocreatesteepsections
Whenmountingloops,thesecondloophasto
besmallerthanthefrstlooptoensurethesteel
ballsrunningsmoothly
Thedistancebetweenthearmsshouldbebetween8to10cm.Whenthedistanceislarger, rail stands[A6]havetobeinstalled
Cuthere

18
Assembly of double loop tunnel and
exits/entries of the free fall helix
19
20
Assemblyof thedouble
looptunnel (fg. 46-49)
1. Theloopingdiameters depend
onthefall heightof thesteel
balls (seetheexamplein
fg. 46-47)
2. All singleloops of theloop
tunnels must beroundand
havethesamediameterto
keepthesteel ballsrunning
smoothly
Assemblyofthefreefall
helix(entries&exits)
(fg. 50+51)
1. Payattentiontoaproper
installationoftheentries and
exits (fg. 50)
2. Install rails of entries and
exits as showninfg. 50
46
48
50 51
49
47
Height
Diameter
Entry Entry
Entry
Exit Exit
Exit
Exit
Diameter
Parallel Parallel
InnererLooping
Innerlooping
Outerlooping
Diameter

19
21
22
23
52
58
55
56
57
54-1 54-2
53
Entry
Entry
Exit
Exit
Assembly of rails
Installationofelevator
(entry&exit)
Importantinformationforthe
assemblyofelevatorentryandexit
(fg.52)
Steelballswillnotruncorrectlyif
entryandexitpointinthesame
direction
Payattentiontoaproperinstallation
oftheentryandexit(fg. 53)
Install railsascloselyaspossible
totheentryandexitoftheelevator
toensurethesteel ballsrunning
smoothly(fg.53)
Payattentiontoacorrectangleof
therailswhenthesteel ballsenter
theelevator(fg. 54-1, 54-2,55)
Makesurethesteelballsenterthe
elevatorslowly.Otherwisetheywill
reboundandfallofftherails
(fg.54-1)
Steelballsthatentertheelevator
mayreboundandthownbackonto
therailsafterhittingthehelix.Pay
particularattentionheretothe
correctseatingoftherails.Otherwise
thesteel ballswill stopandcannot
re-entertheelevator(fg. 54-2)
Attheentryallrailsmustbeatright
anglestotheelevator(fg.55)
Distancebetweenrails
(fg. 56)
Install therail standtokeeprails
parallel(fg.56)
Assemblyofcurves
(fg. 57+58)
Curvesneedtobeassembledina
certainangletopreventsteelballs
frommissingtheturn(fg.57). If
steel ballsmisstheturn,speedhas
tobereducedrightbeforethecurve
Adjustrailstoreducespeedofthe
steel balls(fg. 58)
All railsmustbeatrightanglestothe
elevator
Keeprailsparallel
Adjustrailstoreducespeed
Curvesneedtobe
assembledinacertainangle

20
Disposal Restrictions(WEEE)
Electrical andelectronicequipmentshouldbedisposedseparatelyfromthehouseholdwaste. Takeyourunwantedequipmenttoyourlocal communitycollectionpoint. This requirement applies tomembercountries
of theEuropeanUnionas well as othernon-Europeancountries withaseparatewastecollectionsystem. Neverthrowbatteries intonormal householdwaste, but disposeof dischargedbatteries
at thecollectionpointsprovidedforthat purpose(e.g. yourlocal toxicwastedisposal centre).
RecommendedAccessories: 1 xC/LR14 battery1.5V
Insertingthebattery: UseaPhillips screwdrivertoopenthebatterycompartment cover. Insert 2xC/LR14batterieswiththecorrectpolarityandreplacethebatterycompartmentcover.
Distributedby:
Safety Instructions – Keep After Reading
General SafetyInstructions
This ball rollercoasteris NOTATOYandonlysuitableforpersons 14years andolder!
Warning: Readthemanual carefullybeforeusingtheball rollercoaster. Keepthemanual afterreading.
Alwaysfollowexactlytherecommendations givenintheinstructions.
Errorsandnegligences inoperatingyourball rollercoastercanresult ininjuries anddamageto
property. As manufacturers and vendors haveno infuenceontheoperationand maintenanceof your
ball rollercoaster, webringthesehazards expresslytoyourattentionbut denyall furtherliability.
Keepawayfromchildren. Theball rollercoastercontains small parts. Chokinghazard.
Warning: Sharpedges - watchyour fngers.
Warning: Donot drapetherail aroundyour neck, as this couldresult insuffocationorinjury.
Strangulationhazard.
Keepthepackagingforfuturereferenceas it contains important information.
SafetyInstructionsDuringOperation
Movingparts areaconstant sourceof injury. Nevertouchmovingparts.
Keephands, hair, looseclothingandfurtherobjects awayfrommovingparts.
Persons (includingchildren) withreducedphysical, sensoryormental capabilities orlackof experience
arenot allowedtousethis ball roller coaster, unless theyaresupervisedbyapersonresponsiblefor
theirsafetyandabletogiveprofessional advicehowtheproductshouldbeused.
Donotbendtheshafts andotherparts toavoidinjuryandensuresafeoperation.
Keepfngers awayfromthemovingelevatortoavoidinjury.
Onlyuseoriginal steel ballstoprevent damageof theball rollercoaster.
Caution: Violent jamming(stopping) duringoperationmaydamagethemotor. Donot cumberthe
elevator.
Alwaysstoreandoperatetheball roller coasteratasafeplace.
Besuretocheckbatteryregularlytoensureaproper operationoftheelevator.
Checkrails regularlyforafrmseatingandadjust ifnecessary!
Protecttheball rollercoasterfromheatandsun.
Caution: Toprotect motor fromdamageandoverheating, donot operatethe ball roller coasterfor more
than5hours at atime.
SafetyInstructionsForBatteries
Onlybatteries of thesameorequivalent typeas recommendedaretobeused.
Exhaustedbatteries shouldberemovedfromtheball rollercoaster.
Donotdisposebatteries infre– batteries will explodeorleak.
Batteryis tobeinsertedwiththecorrect polarity.
Non-rechargeablebatteriesarenottoberecharged.
Removebatteryif theball rollercoasteris nottobeusedforanextendedperiodoftime.
Besuretocheckbatteryregularlytoensureaproper operationoftheelevator.
SpaceRail LLC - Salt Lake City, UT - www.spacerails.com - [email protected] - 801.486.3867