Speakman SE-220 User manual

SPEAKMAN®
400 Anchor Mill Rd. New Castle, DE 19720 Phone: [phone] Fax: [phone]
07/28/2016speakman.com 92-SE-220-227-03
SPEAKMAN®
SE-220, SE-220-SS, SE-227, SE-227-SS
Installation, Maintenance & Operation Instructions
LIFESAVER® EMERGENCY SHOWER
DESCRIPTION
Emergency deluge shower supplied with stay-open full flow ball valve, activated by triangular pull rod.
SE-220 SPECIFICATIONS
SHOWER HEAD: 8” DIA. YELLOW PLASTIC.
FLOW CONTROL: SEE FLOW DATA CHART BELOW
VALVE: 1” NPT FEMALE BRASS, CHROME-PLATED. STAY-OPEN VALVE.
ACTIVATOR: POWDER COATED YELLOW, ALUMINUM TRIANGULAR PULL ROD.
INLET: 1” NPT FEMALE.
SHIPPING WEIGHT: 6.65 LB.
EMERGENCY SIGN: 7-7/8” X 7-7/8” PLASTIC WALL SIGN.
SE-220-SS SPECIFICATIONS
SHOWER HEAD: 8” DIA. STAINLESS STEEL.
FLOW CONTROL: SEE FLOW DATA CHART BELOW
VALVE: 1” NPT FEMALE STAINLESS STEEL. STAY-OPEN VALVE.
ACTIVATOR: STAINLESS STEEL TRIANGULAR PULL ROD.
INLET: 1” NPT FEMALE.
SHIPPING WEIGHT: 6.65 LB.
EMERGENCY SIGN: 7-7/8” X 7-7/8” PLASTIC WALL SIGN.
SE-227 SPECIFICATIONS
SHOWER HEAD: 8” DIA. YELLOW PLASTIC.
FLOW CONTROL: SEE FLOW DATA CHART BELOW
VALVE: 1” NPT FEMALE BRASS, CHROME-PLATED. STAY-OPEN VALVE.
ACTIVATOR: POWDER COATED YELLOW, ALUMINUM TRIANGULAR PULL ROD.
INLET: 1” NPT FEMALE.
PIPE: 1” IPS GALVANIZED STEEL.
SHIPPING WEIGHT: 8.98 LBS.
EMERGENCY SIGN: 7-7/8” X 7-7/8” PLASTIC WALL SIGN.
SE-227-SS SPECIFICATIONS
SHOWER HEAD: 8” DIA. STAINLESS STEEL.
FLOW CONTROL: SEE FLOW DATA CHART BELOW
VALVE: 1” NPT FEMALE STAINLESS STEEL. STAY-OPEN VALVE.
ACTIVATOR: STAINLESS STEEL TRIANGULAR PULL ROD.
INLET: 1” NPT FEMALE.
PIPE: 1” IPS GALVANIZED STEEL.
SHIPPING WEIGHT: 8.98 LBS.
EMERGENCY SIGN: 7-7/8” X 7-7/8” PLASTIC WALL SIGN.
INSTALLATION
Review drawing to assure proper installation. Assemble unit to a 1” supply pipe that has an uninterrupted
source of potable water. Use pipe sealant on this joint. Failure to use potable water can result in
emergency units producing impure or contaminated water causing possible further injury.

SPEAKMAN®
400 Anchor Mill Rd. New Castle, DE 19720 Phone: [phone] Fax: [phone]
07/28/2016 speakman.com 92-SE-220-227-03
OPERATION
This shower is activated by pulling downward on the stainless steel pull rod. The valve will continue
to discharge water until the rod is manually pushed back to the off position.
TESTING PROGRAM
The American National Standards Institute (ANSI) states that all safety emergency equipment shall be
activated on a weekly basis to flush the line and verify proper operation. Speakman Company furnishes
a testing record tag (91-0635) with each unit. On this tag the date of inspection and the inspector’s initials
should be noted.
MAINTENANCE
Should you need parts to repair this unit, please reference the parts listing below for correct part numbers.
Reference additional technical sheets (supplied) for information on the SE-911 / SE-911-SS stay-open valve,
and the SE-810 / SE-820 shower head. Before any maintenance is done be sure to shut the water supply
off.
WARNING: Use only genuine Speakman parts when repairing or replacing components.
To order parts call 1-800-537-2107.
SE-220 ROUGH-IN
REPLACEMENT/REPAIR PARTS
ITEM PART/GROUP # DESCRIPTION
1A SE-911 1” Stay-Open Valve
2A SE-810 8” Plastic Shower Head
3A RPG47-0046 Aluminum Pull Rod
SE-220-SS ROUGH-IN
REPLACEMENT/REPAIR PARTS
FLOW DATA
SHOWER:
Notes
This unit should be connected to an uninterrupted source of potable water, with a minimum flowing
pressure of 30 PSI and a maximum static pressure of 80 PSI.
All units meet existing ANSI Z358.1 Standards and OSHA Rules. Product improvements may cause
specification and dimensional changes without notice
ITEM PART/GROUP # DESCRIPTION
1B SE-911-SS
Stainless Steel 1” Stay-Open
Valve
2B SE-820 8” Stainless Steel Shower Head
3B RPG47-0044 Stainless Steel Pull Rod
FLOW PRESSURE PSI (BAR)
30 (2.1)
40 (2.7)
FLOW RATE GPM (LPM)
21 (79)
22 (83)

SPEAKMAN®
400 Anchor Mill Rd. New Castle, DE 19720 Phone: [phone] Fax: [phone]
07/28/2016 speakman.com 92-SE-220-227-03
SE-227 ROUGH-IN
REPLACEMENT/REPAIR PARTS
ITEM PART/GROUP # DESCRIPTION
1A SE-911 1” Stay-Open Valve
2A SE-810 8” Plastic Shower Head
3A RPG47-0046 Aluminum Pull Rod
SE-227-SS ROUGH-IN
REPLACEMENT/REPAIR PARTS
ITEM PART/GROUP # DESCRIPTION
1B SE-911-SS
Stainless Steel 1” Stay-Open
Valve
2B SE-820 8” Stainless Steel Shower Head
3B RPG47-0044 Stainless Steel Pull Rod
FLOW DATA
SHOWER:
Notes
This unit should be connected to an uninterrupted source of potable water, with a minimum flowing
pressure of 30 PSI and a maximum static pressure of 80 PSI.
All units meet existing ANSI Z358.1 Standards and OSHA Rules. Product improvements may cause
specification and dimensional changes without notice
FLOW PRESSURE PSI (BAR)
30 (2.1)
40 (2.7)
FLOW RATE GPM (LPM)
21 (79)
22 (83)