Speakman SE-810 User manual

INSTRUCTIONS FOR MODELS
92-SE-800-04
For additional assistance or service please contact:
SPEAKMAN®Company
400 Anchor Mill Road
New Castle, DE 19720
800-537-2107
customerser[email protected]
www.speakman.com
SE-810 (-BPT)
SE-820 (-BPT)
SE-830 (-BPT)
SE-840 (-BPT)
IMPORTANT
SAFETY TIPS
Read all instructions thoroughly before beginning
installation. Be sure to wear eye protection.
MAINTENANCE
WARRANTY
Additional warranty information can be found at:
www.speakman.com
Your new Speakman Product is designed for years of
trouble-free performance. Keep it looking new by
cleaning it periodically with a soft cloth. The use of harsh
chemicals and abrasives on any of the Speakman custom
finish products may damage the finish and void the
product warranty. Please be sure to only use approved
cleaners. Please contact Speakman for any clarification
of acceptable cleaners.
Thread Seal
Tape
Adjustable
Wrench
TOOLS AND SUPPLIES
FLOW DATA: 21gpm @ 30psi flowing.
This Emergency Showerhead features a self draining
feature to prevent freezing of water passages within the
Showerhead.
1Option A - If installing Shower Head to existing
unit, be sure to remove existing flow control
from the outlet pipe.
1Option B - If installing Shower Head to
stanchion pipe, remove existing flow control
located further to the back of the outlet pipe.
2Apply Thread Seal Tape to exposed threads of
Emergency Shower Unit in a clockwise direction.
3Thread Shower Head onto outlet pipe of
Emergency Shower Unit. Wrench tighten
connection. Take care to not overtighten or
damage may occur. Activate Emergency
Shower Unit and test for proper operation.
OR

ROUGH-IN DIAGRAMS SPEAKMAN®
DIMENSIONS SUBJECT TO CHANGE WITHOUT NOTICE.
8"
203mm
313
16
"
97mm
SE-810
SE-810-BPT
1” NPT INLET
(SE-810)
1” BPT INLET
(SE-810-BPT)
SE-820
SE-820-BPT
8"
203mm
311
16
"
93mm
1” NPT INLET
(SE-820)
1” BPT INLET
(SE-820-BPT)
SE-830
SE-830-BPT
10"
254mm
311
16
"
93mm
1” NPT INLET
(SE-830)
1” BPT INLET
(SE-830-BPT)
SE-840
SE-840-BPT
213
16
"
71mm
27
8
"
74mm
1” NPT INLET
(SE-840)
1” BPT INLET
(SE-840-BPT)
REPAIR PARTS
REPLACEMENT FLOW CONTROL
RPG05-41787
FLOW PRESSURE PSI (BAR) 15 (1.03) 20 (1.37) 25 (1.72) 30 (2.07) 35 (2.41) 40 (2.75)
FLOW RATE GPM (LPM) 16 (61) 18 (68) 19 (72) 20 (75) 21 (79) 22 (83)
FLOW DATA
SHOWER: