SPEC RSP-501 User manual

Oil Capacitors inside
RSP-501
REAL-SOUND PROCESSOR
The Real Sound processor brings out the full potential of your
speakers, delivering realistic sound and rich musicality.
When playing back music on an audio device, there is generally always counter-electromotive
force in the voice coil of the speaker unit, due to changes in amp output over time. This
counterelectromotive force returns to the amp via the speaker cord, making it dicult to drive
the speaker in accordance with the input signal. This unit absorbs counter-electromotive force,
reducing uctuations in speaker impedance, particularly in the mid to high ranges. This makes it
possible to drive the speaker more faithfully, improving speaker resolution and startup, and also
reproduces opposing natural resonances, delivering realistic sound and rich musicality.
* The eects will dier depending on your speaker system and the amp used with it.
EX

SPECCORPORATION
6thFL.SHINKIOI-CHOBUILDING,4-1KIOI-CHO,CHIYODA-KU,
TEL[phone]/FAX[phone]
TOKYO,102-0094JAPAN
URLspec-corp.co.jp
E-mail[email protected]
Main Specications
Compatible speaker impedance Preferably 10 W or lower
Max amp output Preferably 1 kW or lower
External dimensions 100 x 47 x 117 mm (WxHxD)
Weight Approx. 190 g
Package contents 2 units, 1 polishing cloth,
1 operation manual/warranty
* The surface of the unit is nished with urethane coating.
** These specications and appearance are subject to change without notice.
(1) Always turn o the amp's power before connection.
(2) Connect a speaker cord to the unit's connection terminals. The red connection terminal is positive polarity (+), and
the black one is negative (-).
(3) Connect the speaker cords from the unit and the amp to the speaker system's input terminals. Be careful of the
polarity.
(4) After connecting the cords, make sure that the speaker cord is securely connected to each terminal.
Connection
Connect the unit to your speaker system using speaker cords, as shown in the gure below.
To amp
Speaker system
The unit
Red
Black
Input terminal