Speco HTFB4TM User manual

INSTRUCTION
MANUAL
4MP Flexible Intensier Technology
TVI Motorized Zoom Focus Camera
Speco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specifications without notice and without incurring any obligation. Rev. 08/01/2017
HTFB4TM
(Bullet Camera)
HTFD4TM
(Dome Camera)

Contents
- 2 -
◑
Contents...................................................... 2
◑
Precautions ................................................. 3, 4
◑
Safety Instructions ...................................... 5
◑
Package Contents....................................... 6
◑
Camera Installation ..................................... 7-10
◑
Lens Adjustment ......................................... 11
◑
Specications.............................................. 12,13
◑
Camera Dimension ..................................... 14
◑
Features...................................................... 15
◑
OSD Menu Details ...................................... 16- 32
◑
Trouble Shooting......................................... 33

- 3 -
Precautions
Do not install the camera in
extreme temperature conditions.
Do not touch the front lens of the
camera.
Never keep the camera pointed
directly at strong light.
Do not expose the camera to
radioactivity.
Do not install the camera under
unstable lighting conditions.
Do not drop the camera or subject
it to physical shocks.
Only use the camera under conditions
where temperatures are between
-10°C and +50°C. Be especially careful to
provide ventilation when operating under
high temperatures.
This is one of the most important parts of
the camera. Be careful not to leave
fingerprints on the lens cover.
It can cause malfunctions to occur. If exposed to radioactivity the CCD
will fail.
Severe lighting change or flicker can
cause the camera to work improperly.
Housing damage can compromise
weatherproof ratings.
NOTE
* If the camera is exposed to spotlight or object reflecting strong light,
smear or blooming may occur.
* please check that the power satisfies the normal specification before
connecting the camera.

- 4 -
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
their own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION : To prevent electric shock and risk of fire hazards:
ō Do NOT use power sources other than those specified.
WARNING - To prevent electric shock and risk of fire hazards:
୛Do NOT use power sources other than that specified.
୛Do NOT expose this appliance to rain or moisture.
In USA and Canada, Use Class 2 Power Supply Only

- 5 -
Safety Instructions
Precautions for use
Please handle this camera carefully :
◑ This camera should be installed by qualied personnel only
◑There are no user serviceable parts inside
◑Do not disassemble this camera other than to make initial adjustments
◑Use a UL approved regulated 24 volt AC or 12 volt DC power supply
◑
Use appropriate low voltage power cable to prevent re or electrical shock
◑
Please insure that your installation area can support the weight of the camera
◑Do not use a strong or abrasive detergent when cleaning the camera
◑Do not install near cooling or heating device

- 6 -
Package Contents
Please make sure that the following items are included in the Package:
1) HTFB4TM Included Junction Box (CVCJBB)
• 1 Video Test Connector, Power Jack
• 1 Bracket Base
• 1 Wrench
• Set Screw
- 4 Tapping Screws 4x25
- 4 Hexagon Socket Screws M5x10
- 4 Plastic Anchor
2) HTFD4TM Included Junction Box (CVCJBD)
• 1 Video Test Connector, Power Jack
• 1 Chameleon Cover
• 1 Wrench
• Set Screw
- 4 Tapping Screws 4x40
- 1 Hexagon Socket Screw M4x8
- 4 Tapping Screws 4x25
- 3 MachineScrews M4x15
- 4 Plastic Anchor

- 7 -
CAMERA INSTALLATION
6
CAMERA INSTALLATION
CONNECT POWER CABLE
1. WHEN USING 12 VOLTS DC (constant voltage 500mA)
2. WHEN USING 24 VOLTS AC (40 Volt Amps)
3. CONNECT VIDEO CABLE
CONNECT YELLOW COLOR BNC CABLE TO THE BNC JACK.
DC 12V Power Supply
Power In put :R ED
Center : (+)
LBACK:(-)
RED(+)
Power Supply
AC 24V

- 8 -
CAMERA INSTALLATION
Compatibility
1) HTFB4TM
2) HTFD4TM
INTCM
INTCMINTWM

CAMERA INSTALLATION
- 9 -
1. HTFB4TM
WALL
SCREW M5x10, HEXAGON SOCKET , SUS, BK, 4EA
BRACKET ASSYEMBLY
SCREW-TAP,WHT, TP1, M4X25, TH, 4EA
JUNCTION BOX

CAMERA INSTALLATION
- 10 -
2. HTFD4TM
TAPPING SCREW 4X25, 4EA
MACHINE SCREW 4X15, 3EA
JUNCTION BASE SPONGE
CEILING
JUNCTION BOX ASSEMBLY
CAMERA ASSEMBLY
DOME COVER

- 11 -
1. HTFB4TM
LENS ADJUSTMENT
Open the cap
VIDEO TEST
SET UP
LED LEVEL

- 12 -
F
1/2.9" SONY STARVIS CMOS Sensor
2184(H) X 2202(V), 4.81M Pixels
3096(H) X 2218(V), 6.87M Pixels
2560X1440 (1440p@15F)
Progressive Scan
0.01 Lux @ F1.2 , (Sens-UP X32)
1.0Vp-p Composite. 75 Ohms
Universal HD Analog, CVBS, EX-SDI (Option)
More than 50dB
0 ~ 10 Level Adjustable
AUTO / Manual(1/30,1/25Sec ~ 1/30000Sec) / FLICKER
0 ~ 20 Level Adjustable
OFF/AUTO (x2 ~ x32)
OFF / ON (Low,Middle,High)
ODOL WDR(4M 15F) / ROI MODE
OFF/ON
1 ~ 20 Level Adjustable
OFF/LOW/MIDDLE/HIGH
OFF/ON (4 Zone)
OFF/ON (16 Zone)
Auto(AGC)/Day/Night/Ext
0~20 Level Adjustable
Auto / AWB / AWC →Set / Manual
2D, 3DNR
MIRROR,V-FLIP
OFF/ON (~ x16 )
0~10 Level Adjustable
Sensor type
Effective pixels
Total pixels
Resolution
Scanning system
Min. illumination
Video Output
S/N Ratio
AGC
Shutter Speed
Brightness
Sens-UP
WDR(Wide Dynamic Range)
Backlight Compensation(BLC)
HSBLC
ACE(D-WDR/ATR-EX))
Motion Detection
Privacy Masking
Day & Night
Smart -IR(IR OPTIMIZER)
White Balance
Digital Noise Reduction
Mirror
D-ZOOM(EZOOM)
Sharpness
r = 0.45 ~ 0.65GAMMA Correction
OFF/ONLens Shading(LSC)
OFF/ON
DEFOG
ENG/KOR/CHN/CHA(S)/JPNCAM TITLE
CAM ID / BAUDRATE (OPTION)RS485
DC12V : Max 8.5W / 0.71A, AC24V : Max 7.9W / 0.53APower Consumption
ENG/KOR/CHN1/CHA2/JPNLanguage
AUTO (1024EA)
-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)
-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)
3.90”(W) x 3.90”(H) x 9.16”(D)
3.08Ib
Defect(White pix mask)
Operating Temperature
Storage Temperature
Dimension
Weight
IUGC5UN
SPECIFICATIONS
HTFB4TM (2.8-12mm)
■
4MP FIT TVI Motorized Zoom Focus Camera
2.8-12mm MFZ Lens

- 13 -
1/2.9" SONY STARVIS CMOS Sensor
2184(H) X 2202(V), 4.81M Pixels
3096(H) X 2218(V), 6.87M Pixels
2560X1440 (1440p@15F)
Progressive Scan
0.01 Lux @ F1.2 , (Sens-UP X32)
1.0Vp-p Composite. 75 Ohms
Universal HD Analog, CVBS, EX-SDI (Option)
More than 50dB
0 ~ 10 Level Adjustable
AUTO / Manual(1/30,1/25Sec ~ 1/30000Sec) / FLICKER
0 ~ 20 Level Adjustable
OFF/AUTO (x2 ~ x32)
OFF / ON (Low,Middle,High)
ODOL WDR(4M 15F) / ROI MODE
OFF/ON
1 ~ 20 Level Adjustable
OFF/LOW/MIDDLE/HIGH
OFF/ON (4 Zone)
OFF/ON (16 Zone)
Auto(AGC)/Day/Night/Ext
0~20 Level Adjustable
Auto / AWB / AWC →Set / Manual
2D, 3DNR
MIRROR,V-FLIP
OFF/ON (~ x16 )
0~10 Level Adjustable
Sensor type
Effective pixels
Total pixels
Resolution
Scanning system
Min. illumination
Video Output
S/N Ratio
AGC
Shutter Speed
Brightness
Sens-UP
WDR(Wide Dynamic Range)
Backlight Compensation(BLC)
HSBLC
ACE(D-WDR/ATR-EX))
Motion Detection
Privacy Masking
Day & Night
Smart -IR(IR OPTIMIZER)
White Balance
Digital Noise Reduction
Mirror
D-ZOOM(EZOOM)
Sharpness
r = 0.45 ~ 0.65GAMMA Correction
OFF/ONLens Shading(LSC)
OFF/ON
DEFOG
ENG/KOR/CHN/CHA(S)/JPNCAM TITLE
CAM ID / BAUDRATE (OPTION)RS485
DC12V : Max 8.5W / 0.71A, AC24V : Max 7.9W / 0.53APower Consumption
ENG/KOR/CHN1/CHA2/JPNLanguage
AUTO (1024EA)
-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)
-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)
5.12”(W) x 3.89”(H) x 5.12”(D)
1.98Ib
Defect(White pix mask)
Operating Temperature
Storage Temperature
Dimension
Weight
IUGE5UN
SPECIFICATIONS
HTFD4TM (2.8-12mm)
■
4MP FIT TVI Motorized Zoom Focus Camera
2.8-12mm MFZ Lens
F

- 14 -
CAMERA DIMENSION
1) HTFB4TM
9.16”
3.90”
2) HTFD4TM
HI-POWER LED
PHOTO SENSOR
CASE
CABLE
HEATER
LENS
3.94”
5.12”
5.12”
3.89”

- 15 -
General Features
●
Transfer Video Interface
The combination of a 2Mega CMOS image sensor and TVI DSP provides an excellent resolution
of TVI picture.
●
3D-DNR
Smart 3DNR prevents the image blurring of moving object and activates only if moving objects
are appearing on the scene.
●
Smart-IR
No saturation image, vivid image in darkness! "TVI" camera makes very sharp video image in
darkness! This technology eliminates saturation of video image of the closer object in darkness
by control of the IR sensitivity. Saturation never happens in our "TVI"cameras, you can enjoy
vivid image in any dark condition!
●
Sens-Up
Despite a limited & low light condition, Sens-Up - Max. x32 helps the viewer to get visible and
clear images.
●
Defog
Defog function “improves” the clarity of images taken in poor conditions such as fog, smoke,
rain or snow.
●
WDR
A powerful and advanced technology that captures a high resolution picture even where
images appear dark.
●
CVBS(Composite Video Blanking and Sync)
TV system is switchable 'NTSC' or 'PAL' with built-in OSD.
●
Intelligent Function
An extraordinary technology that enables Speco Technologies TVI to become the ultimate
solution by providing intelligent features based on motion detection. It also strengthens crime
prevention and detection.

- 16 -
5. BACKLIGHT OFF
HLC LEVEL 0~20
COLOR BLK/WHT/YEL/CYN/GRN/MAG/RED/BLU
RETURN
BLC H-POS 0~26
V-POS 0~26
H-SIZE 0~26
V-SIZE 0~26
RETURN
WDR WDR MODE LINE/FRAME
ROI MODE OFF
ON WINDOW ZONE 0~3
WINDOW USE ON/OFF
H-POS 0~2560
V-POS 0~1440
H-SIZE 0~2560
V-SIZE 0~1440
WEIGHT LOW/MIDDLE/HIGH
RETURN
4. WHITE BAL AWB AUTO
AWB
AWC-SET
MANUAL C-TEMP 3000K/5000K/8000K
R-GAIN 0~20
B-GAIN 0~20
RETURN
COLOR GAIN 0~20
RETURN
6. SPECO DNR OFF/LOW/MIDDLE/HIGH
How to Set Up the camera menu
2. 2MOTOR AF MODE AUTO/MANUAL
SCANNING HALF/FULL
ONEPUSH ON
SYNC TDN ON/OFF
INITIAL ON
RETURN
1. LENS DC
MANUAL
3. EXPOSURE BRIGHTNESS 0~20
SUTTER AUTO MODE(LENS:DC) INDOOR/OUTDOOR/DEBLUR
RETURN
MODE(LENS:MANUAL) NORMAL/DEBLUR
RETURN
MANUAL SPEED 1/3- ~ 1/30000
RETURN
FLICKER
SENS-UP OFF~X32
AGC 0~10
RETURN
●
Setup Menu
MENU

- 17 -
7. DAY&NIGHT AUTO IR ON/OFF
SMART IR 0~20
AGC THRES 0~20
AGC MARGIN 0~20
RETURN
COLOR
B/W SMART IR 0~20
RETURN
EXTERN IR ON/OFF
SMART IR 0~20
EXTERN SW LOW/HIGH
D>N THRES 0~20
N>D THRES 0~20
DELAY LOW/MIDDLE/HIGH
RETURN
8. IMAGE SHARPNESS 0~10
GAMMA 0.45~0.75
MIRROR ON/OFF
FLIP ON/OFF
D-ZOOM X1.0~X16.0
ACE OFF/LOW/MIDDLE/HIGH
DEFOG OFF
ON MODE AUTO/MANUAL
LEVEL LOW/MIDDLE/HIGH
RETURN
SHADING OFF
ON WEIGHT 0%~100%
RETURN
PRIVACY BOX OFF
ON ZONE NUM 0~15
ZONE DISP ON/OFF
H-POS 0~80
V-POS 0~46
H-SIZE 0~80
V-SIZE 0~46
Y LEVEL 0~20
CB LEVEL 0~20
CR LEVEL 0~20
TRANS 0~3
RETURN
POLYGON OFF
ON ZONE NUM 0~7
ZONE DISP ON/OFF
POS0-X 160
POS0-Y 91
POS1-X 160
POS1-Y 91
POS2-X 160
POS2-Y 91
POS3-X 160
How to Set Up the camera menu
●
Setup Menu
MENU

- 18 -
9. MOTION OFF
ON DET WINDOW WINDOW USE 0~3
WINDOW ZONE ON/OFF
DET H-POS 1~80
DET V-POS 1~45
DET H-SIZE 1~80
DET V-SIZE 1~45
RETURN
SENSITIVITY 0~10
MOTION OSD ON/OFF
TEXT ALARM ON/OFF
SIGNAL OUT ON/OFF
RETURN
10. SYSTEM COMM CAM ID 0~255
BAUDRATE 2400/4800/9600/57600/115200
RETURN
OUTPUT MODE FRAME RATE 720P 30/1080P 30/1440P 15
FREQ 50Hz/60Hz
SDI MODE OFF/135M(V2.0)/135M+(V2.1)/270M(V1.0)
ANALOG MODE CVBS/HD-T,CVBS/HD-C,CVBS/HD-A,CVBS
RETURN
IMAGE RANGE FULL
COMP
USER OFFSET 0~32
RETURN
COLOR SPACE YUV/SD-CBCR/HD-CBCR
COLOR BAR OFF/ON
LANGUAGE ENG/CHN/CHN(S)/JPN/KOR
CAM TITLE OFF
RIGHT UP/LEFT DOWN U,D-CHAR SELECT/L,R-POSITION/ENTER-RETURN
RESET ON
RETURN
11. EXIT
POS3-Y 91
Y LEVEL 0~20
CB LEVEL 0~20
CR LEVEL 0~20
TRANS 0~3
RETURN
RETURN
How to Set Up the camera menu
●
Setup Menu
MENU

- 19 -
2. Move and select the required function using the Up and Down button.
* Move the triangular indicator Up or Down to select the desired feature by pressing
the Up or Down button.
Menu Set Up
Menu items can be selected by using the OSD buttons of the camera.
1. PRESET
1-1. Preset : INDOOR / OUTDOOR / LOW LIGHT / HALLWAY / LOBBY(WDR) / ELEVATOR.
- Used for a quick and easy setup for the installation environment.
* The Advaned Set Up menu will be displayed on the monitor.
SPECO TECH
1. PRESET
2.MAIN SETUP
3.EXIT
INDOOR
MENU
1. LENS
2. 2-MOTOR
3. EXPOSURE
4. WHITE BAL
5. BACKLIGHT
6. SPECO DNR
7. DAY&NIGHT
8. IMAGE
9. MOTION
10. SYSTEM
11. EXIT
DC
OFF
MIDDLE
AUTO
OFF

- 20 -
3. Change menu settings using the Left or Right button.
* Available values or Status are displayed by pressing the Left or Right buttons.
Press the button until desired value / status is displayed.
4. After Changing the setting move the arrow indicator to EXIT and press the
SET button to EXIT.
This function is to adjust the brightness of the monitor.
1. Move the triangular indicator to LENS using the Up and Down buttons on the Set Up menu screen.
2. Select the desired lens type by pressing the Left of Right button.
NOTE
* Move to the available submenu by moving arrow to desired feature.
* Submenu is not available when this symbol displayed “---“.
1. LENS
MENU
1. LENS
2. 2-MOTOR
3. EXPOSURE
4. WHITE BAL
5. BACKLIGHT
6. SPECO DNR
7. DAY&NIGHT
8. IMAGE
9. MOTION
10. SYSTEM
11. EXIT
DC
OFF
MIDDLE
AUTO
OFF