Speco ONSIP O2PTZ22D5W User manual

O
ON NS SI IP P O O2 2P PT TZ Z2 22 2D D5 5W W, , O O2 2P PT TZ Z3 34 4D D5 5W W U Us se er rs s’ ’ G Gu ui id de e
Rev.1.6 (June. 2013)
1
1.
ONSIP
O2PTZ22D5W
O2PTZ34D5W
(OUTDOOR/INDOOR 1080P)

O
ON NS SI IP P O O2 2P PT TZ Z2 22 2D D5 5W W, , O O2 2P PT TZ Z3 34 4D D5 5W W U Us se er rs s’ ’ G Gu ui id de e
Rev.1.6 (June. 2013)
2
Revision History
Date
Rev No.
Description
Sept,1st, 2012
1.0
First manual revision creation.
Nov,5th, 2012
1.3
Updated Specification
Mar.3rd ,2013
1.4
Updated picture
May 24th, 2013
1.5
Text revisions
June, 19th, 2013
1.6
Updated package contents, drawings

O
ON NS SI IP P O O2 2P PT TZ Z2 22 2D D5 5W W, , O O2 2P PT TZ Z3 34 4D D5 5W W U Us se er rs s’ ’ G Gu ui id de e
Rev.1.6 (June. 2013)
3
Warning & Cautions
If you fail to read this information and handle the product incorrectly, faulty or malfunction as well as
death or serious injury may occur.
This Unit should be installed by train
ed personnel.
Immediately stop using when the product
emits smoke or abnormal heat.
Never install the product in area exposed to
oil or gas.
Never install the product on a ceiling
that cannot hold its weight.
Never touch the power cord with wet hands.
Clean only with dry cloth.
Never use the product in extremely high or
low temperature condition.
Never drop, hit, strongly nor vibrate the
product.
Never expose the product to direct sunlight
or severe ray.
Never touch the front glass of the product.

O
ON NS SI IP P O O2 2P PT TZ Z2 22 2D D5 5W W, , O O2 2P PT TZ Z3 34 4D D5 5W W U Us se er rs s’ ’ G Gu ui id de e
Rev.1.6 (June. 2013)
4
Indications:
Warning: Death or Serious Injury will occur without following Warning.
Caution : Operational Problem(Faulty & Malfunction) will occur without complying with Caution
Reference : Technical Information for Users

O
ON NS SI IP P O O2 2P PT TZ Z2 22 2D D5 5W W, , O O2 2P PT TZ Z3 34 4D D5 5W W U Us se er rs s’ ’ G Gu ui id de e
Rev.1.6 (June. 2013)
5
Table of Contents
Table of Contents............................................................................. 5
1. Introduction ................................................................................ 7
1.1. Overview of O2PTZ22D5W, O2PTZ34D5W............................................... 7
1.2. Specification........................................................................................... 8
1.2.1. Basic Specification....................................................................................................................8
1.3. Application of O2PTZ22D5W, O2PTZ34D5W ............................................ 9
2. Production Description............................................................... 10
2.1. Package Contents ................................................................................. 10
2.1.1. O2PTZ22D5W(OUTDOOR) ....................................................................................................10
2.1.2. O2PTZ34D5W(INDOOR)........................................................................................................10
2.2. Preview ................................................................................................ 11
2.3. Physical Description.............................................................................. 12
2.3.1. External View...........................................................................................................................12
2.3.2. Bottom View & Connection Diagram ..................................................................................12
2.3.3. External & Internal View .......................................................................................................13
2.4. Functional Description .......................................................................... 15
3. Bracket Installation .................................................................. 18
3.1. O2PTZ22D5W(OUTDOOR) .................................................................... 18
3.1.1. Basic Components & Mounting Accessories......................................................................18
3.1.2. Preparation...............................................................................................................................18
3.1.3. Installation using Walling Mount Type................................................................................20
3.2 O2PTZ34D5W(INDOOR) ........................................................................ 22
3.2.1. Preparation...............................................................................................................................22
3.2.2. Installation using Ceiling Mount Type ................................................................................23
3.2.3. Installation using Embedded Mount Type..........................................................................24
4. Installation................................................................................ 27
4.1. Required System Specification.............................................................. 27

O
ON NS SI IP P O O2 2P PT TZ Z2 22 2D D5 5W W, , O O2 2P PT TZ Z3 34 4D D5 5W W U Us se er rs s’ ’ G Gu ui id de e
Rev.1.6 (June. 2013)
6
4.2. Quick Installation Guide ....................................................................... 28
5. Troubleshooting......................................................................... 34
5.1. No Video on Viewer .............................................................................. 34
5.2. Windows vista and Windows 7 User for Record & Capture Problem ....... 35
5.3 Technical Inquiry ................................................................................... 38
6. Appendix................................................................................... 39
6.1. FAN & Heater........................................................................................ 39
6.2. DIP Switch Setting ............................................................................... 40

O
ON NS SI IP P O O2 2P PT TZ Z2 22 2D D5 5W W, , O O2 2P PT TZ Z3 34 4D D5 5W W U Us se er rs s’ ’ G Gu ui id de e
Rev.1.6 (June. 2013)
7
1. Introduction
1
1. .1 1. . O Ov ve er rv vi ie ew w o of f O O2 2P PT TZ Z2 22 2D D5 5W W, , O O2 2P PT TZ Z3 34 4D D5 5W W
O2PTZ22D5W(Outdoor), O2PTZ34D5W(Indoor), is a state-of-the-art Speed Dome Network Camera based on
integrated Embedded Software technologies such as H.264 & MJPEG, G.726 & PCM Video & Audio
Compression, Embedded Web Server, Embedded Streaming Server, various Network Protocols, transmits
synchronized video and audio data in real time through IP Network as well as supports bi-directional audio
communication by allowing transmission of audio from Client PC to the camera
O2PTZ22D5W, O2PTZ34D5W is applicable for various sectors such as Security, Remote Monitoring, Remote
Education, Simple Video Conference as well as Internet Broadcasting System etc.

O
ON NS SI IP P O O2 2P PT TZ Z2 22 2D D5 5W W, , O O2 2P PT TZ Z3 34 4D D5 5W W U Us se er rs s’ ’ G Gu ui id de e
Rev.1.6 (June. 2013)
8
1
1. .2 2. . S Sp pe ec ci if fi ic ca at ti io on n
1
1. .2 2. .1 1. . B Ba as si ic c S Sp pe ec ci if fi ic ca at ti io on n
Class
Description
Video
Compression
H.264 / MJPEG
Resolution
**Refer to the datasheet
Audio
(Bi-directional)
Up Stream
32 Kbps G.726
Down Stream
64 Kbps PCM
Network
Interface
RJ-45, 10/100 Mbps
Access Network
Static, DHCP, PPP/PPPoE
Protocol
IPv4/6, TCP, UDP, IGMP, ICMP, ICMPv6 etc.
I/O
Sensor
4
NC, NO Selectable
Relay Output
2
Alarm or Remote ON/OFF Control (24V, 1A)
RS-232C
Factory Default
Mic/Line In
Selectable on Admin Page
Line Out
1 V p-p Audio Output for Amp embedded Speaker
CVBS Output
Supported
Power
PoE
Supported
DC In
12VDC Adapter (higher than 2 Amp)
Housing
Water-Proof
IP66
Heater
Refer to Installation Configuration
Installation Type
Bracket
Wall, Ceiling, Ceiling Embedded Type
Motion Detection
3 Regions
Optional Shape & Sensitivity for 3 Regions
Upgrade
Remote F/W Upgrade via IP Network
Management & Configuration
Remote Management & Configuration using IP Network and
Admin Tool Page
Client/Viewer
Web Viewer
Simple Access via Internet explorer
Speco-NVR
VMS Software
Dynamic IP
DDNS support
Free DDNS support through Speco Technologies
Security Management
802.1x authentication, User ID & Password Protection, IP
Filtering, Audio per user and Bi-directional audio
communication configuration control
Time
Configuration
Management
Sync to PC
Sync to PC Time
Manual
Manual Configuration
Internet Time Server
Sync to Time Server
DLS
Daylight Savings Configuration

O
ON NS SI IP P O O2 2P PT TZ Z2 22 2D D5 5W W, , O O2 2P PT TZ Z3 34 4D D5 5W W U Us se er rs s’ ’ G Gu ui id de e
Rev.1.6 (June. 2013)
9
1
1. .3 3. . A Ap pp pl li ic ca at ti io on n o of f O O2 2P PT TZ Z2 22 2D D5 5W W, , O O2 2P PT TZ Z3 34 4D D5 5W W
- Security Surveillance (Building, Stores, Manufacturing Device, Parking Lot, Bank, Public Office &
Military etc)
- Remote Monitoring (Hospital, Kindergarten, Traffic Status, Public Area)
- Video Conference, Remote Lecture, Internet Broadcasting
- Climate & Environment Surveillance

O
ON NS SI IP P O O2 2P PT TZ Z2 22 2D D5 5W W, , O O2 2P PT TZ Z3 34 4D D5 5W W U Us se er rs s’ ’ G Gu ui id de e
Rev.1.6 (June. 2013)
10
2. Production Description
2
2. .1 1. . P Pa ac ck ka ag ge e C Co on nt te en nt ts s
Open the package and check if the followings are included;
2
2. .1 1. .1 1. . O O2 2P PT TZ Z2 22 2D D5 5W W( (O OU UT TD DO OO OR R) )
Contents
Description
Remark
Bracket & Housing
Outdoor Housing, Wall Mount Bracket
Manual
Housing Installation Manual
IP Camera
Camera body
Tools & Accessories
L-Wrench 1EA, Cable Tie 5EA,
Terminal Block (2Pin, 5Pin, 6Pin : 1EA),
Screw(Ø 3x6 2EA, Ø 4x22 2EA)
CD
Software & Product User Manual
Quick Reference
Quick Installation Guide
2
2. .1 1. .2 2. . O O2 2P PT TZ Z3 34 4D D5 5W W( (I IN ND DO OO OR R) )
Content
Description
Remark
Bracket
Ceiling Mount Bracket
IP Camera
Camera body
Tools & Accessories
L-Wrench 1EA, Safety Wire 1EA, Cable Tie 5EA,
Terminal Block (2Pin, 5Pin, 6Pin : 1EA),
Screw(Ø 3x6 2EA, Ø 4x16 5EA)
CD
Software & Product User Manual
Quick Reference
Quick Installation Guide

O
ON NS SI IP P O O2 2P PT TZ Z2 22 2D D5 5W W, , O O2 2P PT TZ Z3 34 4D D5 5W W U Us se er rs s’ ’ G Gu ui id de e
Rev.1.6 (June. 2013)
11
2
2. .2 2. . P Pr re ev vi ie ew w
O2PTZ22D5W(Outdoor)
O2PTZ34D5W(Indoor)
IP-Installer
VMS Software
(Speco-NVR)
Speed Dome Network Camera
IPAssignment Program
PC based Client for
monitoring/storing Video/Audio
transmitted form Product
(Max. 64CH supported@D1)

O
ON NS SI IP P O O2 2P PT TZ Z2 22 2D D5 5W W, , O O2 2P PT TZ Z3 34 4D D5 5W W U Us se er rs s’ ’ G Gu ui id de e
Rev.1.6 (June. 2013)
12
2
2. .3 3. . P Ph hy ys si ic ca al l D De es sc cr ri ip pt ti io on n
2
2. .3 3. .1 1. . E Ex xt te er rn na al l V Vi ie ew w
Fig 2-1. External View of O2PTZ22D5W, O2PTZ34D5W
2
2. .3 3. .2 2. . B Bo ot tt to om m V Vi ie ew w & & C Co on nn ne ec ct ti io on n D Di ia ag gr ra am m
Fig 2-2-1. Terminal Block, LAN & Power Connector
12VDC

O
ON NS SI IP P O O2 2P PT TZ Z2 22 2D D5 5W W, , O O2 2P PT TZ Z3 34 4D D5 5W W U Us se er rs s’ ’ G Gu ui id de e
Rev.1.6 (June. 2013)
13
Fig 2-2-2. Terminal Block, LAN & Power Connector
2
2. .3 3. .3 3. . E Ex xt te er rn na al l & & I In nt te er rn na al l V Vi ie ew w
Fig 2-3-1. Connector Part

O
ON NS SI IP P O O2 2P PT TZ Z2 22 2D D5 5W W, , O O2 2P PT TZ Z3 34 4D D5 5W W U Us se er rs s’ ’ G Gu ui id de e
Rev.1.6 (June. 2013)
14
Fig 2-3-2. Connector Part
Fig 2-4. Outdoor Housing

O
ON NS SI IP P O O2 2P PT TZ Z2 22 2D D5 5W W, , O O2 2P PT TZ Z3 34 4D D5 5W W U Us se er rs s’ ’ G Gu ui id de e
Rev.1.6 (June. 2013)
15
2
2. .4 4. . F Fu un nc ct ti io on na al l D De es sc cr ri ip pt ti io on n
DC Power
Connect 12 Volt DC adapter to this terminal for supplying power to the network camera.
AC adapter which is compliant to the specification for the camera should be used. Misuse of
power supply can cause damage to the unit. Speco assumes no responsibility for misuse of the
power supply.
MIC/LINE IN
Connect external audio source or microphone.
Line Out
Connect speakers with built in amplifier. Audio from remote site is output through Line out in bi-directional
audio mode.
100Base-T
100Mbps Ethernet connector (RJ-45). 2 LEDs on the Ethernet connector show the status of the camera
as the following:
-Status LED (Dual Color - Red/Green): It will be lit in green or red depending on the status.
Green: Green color indicates that the camera is in normal operation mode. Continuous green
indicates that data transmission is possible. Blinking green means that someone is
connected to the camera
Red: Continuous or blinking red indicates that hardware is in abnormal condition.
Red/Green LED will be lit with red momentarily and it will be lit with green after a while when
power is applied to the camera.
LINK/LAN LED (Orange): It will be lit with orange color when the network cable is connected properly.
Blinking orange color indicates that normal data transmission is under way. Off state indicates that there
is trouble with the network connection.

O
ON NS SI IP P O O2 2P PT TZ Z2 22 2D D5 5W W, , O O2 2P PT TZ Z3 34 4D D5 5W W U Us se er rs s’ ’ G Gu ui id de e
Rev.1.6 (June. 2013)
16
HEATER/FAN
Used for connecting power cable of heater and fan. Power cable of heater and fan is in the bracket.
Alarm In/Out (ALARM/AUX)
Used for connecting alarm sensor, alarm annunciation device.
Class
Description
Alarm IN
Sensor In (+). NC/NO Selectable in Admin Mode
Alarm IN GND
Ground for Sensor In
Aux OUT
Alarm Output Terminal
Aux OUT(GND)
Ground for Sensor Output
Aux
Relay output is provided for connecting alarm devices or for remote on/off control of devices such as light.
Relay is normal open and it will be closed upon alarm annunciation or remote on.
Fig 2-5. Relay Connection Diagram (Left: lower than 24V, 1A, Right: Higher than 24V 1A)
Alarm
Connect external alarm sensor. Examples of sensing devices are infrared sensor, motion sensor,
heat/smoke sensor, magnetic sensor, etc. Connect the two wires of the sensors to “SNS In”. The sensor
type (NC/NO) can be set in admin page. Multiple sensor devices can be connected in parallel.

O
ON NS SI IP P O O2 2P PT TZ Z2 22 2D D5 5W W, , O O2 2P PT TZ Z3 34 4D D5 5W W U Us se er rs s’ ’ G Gu ui id de e
Rev.1.6 (June. 2013)
17
Sensor
Device
Sensor
Power
Supply
NO/NCType
Sensor1-
Sensor1+
+12V GND
Sensor
Device
Sensor
Power
Supply
Open CollectorType
Photo Coupler
Fig 2-6. Sensor Input Connection Diagram

O
ON NS SI IP P O O2 2P PT TZ Z2 22 2D D5 5W W, , O O2 2P PT TZ Z3 34 4D D5 5W W U Us se er rs s’ ’ G Gu ui id de e
Rev.1.6 (June. 2013)
18
3. Bracket Installation
3.1. O2PTZ22D5W(OUTDOOR)
3
3. .1 1. .1 1. . B Ba as si ic c C Co om mp po on ne en nt ts s & & M Mo ou un nt ti in ng g A Ac cc ce es ss so or ri ie es s
3
3. .1 1. .2 2. . P Pr re ep pa ar ra at ti io on n
1. Open the Dome Cover by unscrewing with wrench.

O
ON NS SI IP P O O2 2P PT TZ Z2 22 2D D5 5W W, , O O2 2P PT TZ Z3 34 4D D5 5W W U Us se er rs s’ ’ G Gu ui id de e
Rev.1.6 (June. 2013)
19
2. Configure the DIP Switch by referring Appendix.
3. Place the Dome Cover and screw.
-When using system controller for the control of the dome, always set the RS-485
communication channel to be: 2400 bps, 8 bit, 1 stop bit, no parity.

O
ON NS SI IP P O O2 2P PT TZ Z2 22 2D D5 5W W, , O O2 2P PT TZ Z3 34 4D D5 5W W U Us se er rs s’ ’ G Gu ui id de e
Rev.1.6 (June. 2013)
20
3
3. .1 1. .3 3. . I In ns st ta al ll la at ti io on n u us si in ng g W Wa al ll li in ng g M Mo ou un nt t T Ty yp pe e
The wall should be strong enough to hold 4 times of the weight of the camera (5.3 KG). This means that the
wall should withstand weight of 21.2 KGs in the minimum.
1. Pass the combined cable through the inside Cable Gland.
2. Fix the end of Cable Gland on the bottom case and coat the attached line between top & bottom
of Cable Gland bottom case with silicone. For the installation at Bottom of Bracket, Gland Cable
Installation is not required (refer to the below Fig).
CABLE GLAND
COMBINED CABLE