Speco HLPR67T User manual

INSTRUCTION
MANUAL
TVI 10x Auto Focus Zoom LPR Camera
4QFDP5FDIOPMPHJFTJTDPOTUBOUMZEFWFMPQJOHQSPEVDUJNQSPWFNFOUT
8FSFTFSWFUIFSJHIUUPNPEJGZQSPEVDUEFTJHOBOETQFDJGJDBUJPOTXJUIPVUOPUJDFBOEXJUIPVUJODVSSJOHBOZPCMJHBUJPO 3FW
HLPR67T
(IR Bullet Camera)

Contents
- 1 -
Ł
Contents......................................................1
Ł
Precautions.................................................2, 3
Ł
Safety Instructions ......................................4
Ł
Package Contents.......................................5
Ł
Camera Installation.....................................6-8
Ł
6SHFL¿FDWLRQV..............................................9
Ł
Camera Dimension.....................................10
Ł
Features......................................................11
Ł
OSD Menu Details......................................12-25
Ł
Trouble Shooting.........................................26

- 2 -
Precautions
Do not install the camera in
extreme temperature conditions. Do not touch the front lens of the camera.
Never keep the camera pointed
directly at strong light. Do not expose the camera to
radioactivity.
Do not install the camera under
unstable lighting conditions.
Do not drop the camera or subject
it to physical shocks.
Only use the camera under conditions
where temperatures are between
-10°C and +50°C. Be especially careful to
provide ventilation when operating under
high temperatures.
This is one of the most important parts of
the camera. Be careful not to leave
fingerprints on the lens cover.
It can cause malfunctions to occur. If exposed to radioactivity the CCD
will fail.
Severe lighting change or flicker can
cause the camera to work improperly.
Housing damage can compromise
weatherproof ratings.
NOTE
* If the camera is exposed to spotlight or object reflecting strong light,
smear or blooming may occur.
* please check that the power satisfies the normal specification before
connecting the camera.

- 3 -
CA
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
their own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION : To prevent electric shock and risk of fire hazards:
ōDo NOT use power sources other than those specified.
WARNING - To prevent electric shock and risk of fire hazards:
୛Do NOT use power sources other than that specified.
୛Do NOT expose this appliance to rain or moisture.
In USA and Canada, Use Class 2 Power Supply Only

- 4 -
Safety Instructions
1SFDBVUJPOTGPSVTF
1MFBTFIBOEMFUIJTDBNFSBDBSFGVMMZ
Ł7KLVFDPHUDVKRXOGEHLQVWDOOHGE\TXDOL¿HGSHUVRQQHORQO\
ŁThere are no user serviceable parts inside
ŁDo not disassemble this camera other than to make initial adjustments
ŁUse a UL approved regulated 24 volt AC or 12 volt DC power supply
Ł
8VHDSSURSULDWHORZYROWDJHSRZHUFDEOHWRSUHYHQW¿UHRUHOHFWULFDOVKRFN
Ł
Please insure that your installation area can support the weight of the camera
ŁDo not use a strong or abrasive detergent when cleaning the camera
ŁDo not install near cooling or heating device

- 5 -
Package Contents
Please make sure that the following items are included in the Package:
1) HLPR67T
q8KFGQ6GUV%QPPGEVQT2QYGT,CEM
q(QEWU#FLWUVOGPV*.246
q$TCEMGV$CUG
q9TGPEJ
q5GV5ETGY
6CRRKPI5ETGYUZ
*GZCIQP5QEMGV5ETGYU/Z

- 6 -
CAMERA INSTALLATION
CONNECT POWER CABLE
1. WHEN USING 12 VOLTS DC (constant voltage 500mA)
2. WHEN USING 24 VOLTS AC (40 Volt Amps)
3. CONNECT VIDEO CABLE
1) WHEN USING IT AS ANALOG OUTPUT,
CONNECT YELLOW COLOR BNC CABLE TO THE BNC JACK.
2) WHEN USING IT AS TVI OUTPUT,
CONNECT BLACK COLOR BNC CABLE TO THE BNC JACK.
DC 12V Power S upply
Power Input :RED
Center : (+)
C V B S
T V I
LBACK:(-)
RED(+)
PowerSupply
AC 24V

- 7 -
CAMERA INSTALLATION
Compatibility
1) HLPR67T
INTJBSW INTCMW

CAMERA INSTALLATION
- 8 -
%#76+10The installation instructions in this manual are for use by qualified service
personnel only. To reduce the risk of electric shock, do not perform any servicing other
than that contained in the operating instructions unless you are qualified to do so.
SCREW TS T1, 4X25, TH, SUS, 4EA
WALL
SCREW M5X10, HEXAGON SOCKET, SUS, BK, 4EA
1. HLPR67T

- 9 -
Image Sensor
Total Pixels
Active Pixels
Scanning System
Sync. System
Resolution
Video Output
Min. Illumination
Lens Type
Focal Length
MODE
AGC
Shut Speed
IRIS
Brightness
WDR/BLC
HLC
DNR
GAMMA
COLOR/B&W
IR CONTROL
FOCUS
DISTANCE
ZOOM SPEED
LENS REFRESH
EXPOSURE
WHITE BAL
MIRROR
DEFOGE
FREEZE
ACE
PRIVACY
MOTION
DEFECT
IMAGE RANGE
LANGUAGE
Power Source
Power Consumption
Operating Temperature
1/3” Panasonic CMOS Sensor
1,956(H) x 1,266(V), 2.48M Pixels
1,944(H) x 1,092(V), 2.12M Pixels
Progressive Scan
Internal
Digital : 1080p/60(50)fps, 1080p/30(25)fps, 720p/60(50)fps, 720p/30(25)fps
Analog : 700TVL
HD : HD TVI, Analog : CVBS(without WDR)
S/N RatioC More than 50dB(AGC off)
0 Lux(IR LED ON)
10x Auto Focus Zoom Lens / Optical x10, Digital x32 Zoom
F=5mm ~ 50mm
AUTO,IRIS.P,SHUT.P,MANUAL
0~5~10
4X,2X,1/30sec,1/60sec,1/120sec,1/250sec,1/700sec,1/1000sec,1/1600sec,
1/2500sec,1/5000sec,1/7000sec,1/10000sec,1/30000sec
0~7~20
0~20
WDR / BLC / OFF
MODE / LEVEL / COLOR
OFF,LOW,MIDDLE,HIGH,AUTO
0.45,0.55,0.65,0.75
COLOR/B&W
ON/OFF
ONE PUSH/MANUAL/AUTO
0.1m,1.0m,3.0m,5.0m,10.0m
0~7
ONE PUSH,1day,2day,3day,4day,5day,6day,7day,8day,9day,10day
FLICKERLESS / ---
MODE / RED GAIN / BLUE GAIN / CHROMA
OFF,H,V,H&V
OFF,MANUAL,AUTO / MANUAL-LOW,MIDDLE,HIGH
ON/OFF
OFF,LOW,MIDDLE,HIGH
ON/OFF (#: 1~24) / COLOR (0~13) / TRANS (0~3)
ON/OFF (#: 1~3) / SENSITIVITY (1~20) / INTERVAL & DWELL TIME (0~255sec)
0~255
COMP / USER / FULL
ENG
DC 12V / AC 24V Dual Votage Operation
260mA(IR ON : 560mA)
-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)
Storage Temperature -4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)
External Diemension 3.98”(W) x 4.57”(H) x 13.11”(D)
Weight 3.52Ibs
HLPR67T
SPECIFICATIONS
+/357;$872)2&86=220/(16
ʄ
79,;$872)2&86=220/35 &$0(5$
F