Spectrum Industries InTouch 32 User manual

??
Important
Before using this product:
• Read this manual
• Comply with all safety and operating instructions
• Ensure all parts and correct quantities are included
Important
Avant d’utiliser ce produit:
• Veillez à lire ce guide
• Respectez les consignes de sécurité et d’utilisation
• Vériez que vous disposez de toutes les pièces
nécessaires à l’installation
Importante
Antes de utilizar este producto:
• Lea este manual
• Cumpla con todas las instrucciones de prevención de
accidentes y operativas
• Revise que todas las partes y las cantidades correctas
estén incluidas
Any parts damaged during shipment must be reported within 5
days of receipt. To report information regarding missing parts or
damage, to purchase parts or accessories, or if you have any
questions, please contact us.
Thank you for purchasing Spectrum products!
Les pièces endommagées pendant le transport doivent faire
l’objet d’un rapport dans les 5 jours de leur réception. Veuillez
prendre contact avec nous si des pièces manquent ou sont
abîmées, si vous avez des questions, ou encore pour acheter
des pièces ou des accessoires.
Merci pour votre achat d’un produit Spectrum!
Si alguna parte se dañó durante el embarque, deberá reportarla
en un lapso de 5 días a partir de la recepción. Para reportar
cualquier información sobre partes faltantes o dañadas, para
adquirirlas o comprar accesorios, o bien, si tiene alguna duda,
póngase en contacto con nosotros.
¡Gracias por adquirir productos Spectrum!
Owner’s Manual
Le manuel du propriétaire
El manual del propietario
Video
Vidéo
Vídeo
Specs
Spécications
Especicaciones
800-235-1262
www.spectrumfurniture.com
Owner’s Manual
0114813R3 Page 1 of 7
InTouch 32™Secure Tablet Locker
55434

0114813R3 Page 2 of 7
Figure 1B
The locker back panel has four 3/8” holes located 16” on-center
to match most stud-wall applications. Fasteners are not included.
(Cords from 16-outlet power units will route through bottom panel.)
1. Choose fasteners appropriate to the wall you will be anchoring to.
2. Determine the preferred wall location and height from oor.
3. Measure and mark the (4) hole locations on the wall. Figure 1B. Be sure fasteners will
be anchored securely to studs or other solid portion of the wall.
4. At the marked wall locations, drill holes appropriate to the chosen fastener type and size.
5. Support the locker (this may take 2-3 people), align the mounting holes, install fasteners,
and tighten to secure the locker to the wall. Figure 1C.
Four 3/8” holes are provided on the bottom panel to anchor the locker
to a worksurface for increased security. Fasteners are not included.
(Cords from 16-outlet power units will route through side panel).
1. Set the locker into its nal position. (If attaching to a table or worksurface,
be sure it is stable and sturdy enough to fully support the unit.)
2. Choose fasteners appropriate to the surface you will be attaching to. The
(4) mounting holes in the bottom panel are 3/8” dia. Figure 1A.
3. Mark the (4) hole locations through bottom panel.
4. At the marked locations, drill holes in the worksurface appropriate to the
chosen fastener type and size.
5. Install fasteners and tighten securely.
A. Worksurface anchoring
B. Wall-mounting
Figure 1A
WARNING
It is the customers responsibility to use appropri-
ate and adequate wall fasteners when attaching
the IT32 Tablet Locker to a wall. Nominal weight
of an empty IT32 is 76 lbs. Total loaded weight
will vary with quantity & types of tablets used.
(4) 3/8” holes
on back panel
Figure 1C
fasteners by
customer
3/8” holes for customer-
supplied fasteners
3/8” holes for
customer-supplied
fasteners
Assembly / Setup
IT32 tablet locker security

0114813R3 Page 3 of 7
route power cords
through divider panel
opening to tablets
side access panel
to power-side
(right-side)
Power-side wiring
Figure 2B
1. To gain access to the power-side, unlock & remove the side panel. Figure 2A.
2. Be sure both 16-outlet power units are unplugged and switched off.
3. Plug up to 32 tablet chargers into the power units. Figure 2B.
4. Route the charge cords through the upper & lower divider panel cutouts and into
the tablet storage area.
route power cords
through divider panel
opening to tablets
tablet chargers
16-outlet
power unit
tablet chargers
16-outlet
power unit
Figure 2A

0114813R3 Page 4 of 7
Figure 3A
Routing power cords to tablets
Figure 3B
Tablet power cords need to be 3’ or longer to use the recommended
cord management method shown in the wiring diagram below.
Figure 3A.
tablets
16-outlet power unit(s)
w/ tablet chargers
1. Use the cord management wraps above each tablet storage slot,
wrap excess cord while leaving enough cord length to drop down
to each tablet. Figure 3A-B.
cord
management
wraps

4mm hex
wrench
Tools
Required
0114813R3 Page 5 of 7
Figure 3C
2. Set tablets into slots. Figure 3C.
3. Plug charge cords into tablets.
4. Plug 16-outlet power units into wall outlets and switch on to begin charging.
Figure 4
Door stop adjustment
If necessary, the offset door stop can be rotated slightly to adjust
the closed position of the doors and lock rods.
1. To rotate, loosen the JC bolt slightly with a 4mm hex wrench. Figure 4.
2. Rotate the door stop until the door is positioned correctly.
3. Re-tighten the JC bolt securely.

0114813R3 Page 6 of 7
• Lea este manual del propietario antes de la instalación u operación.
• No permita que los niños muevan el carro.
• Proceda lenta y cuidadosamente al mover el carro.
• Solo para uso en interiores. No instale o guarde el carro donde quede
expuesto a la humedad.
• No obstruya las rendijas de ventilación.
• Evite cargar el equipo de forma desigual dentro del carro. La distribución asimétrica
del peso podría provocar que el carro se vuelque al momento de moverlo.
• No permita que nadie se siente, pare o suba al carro.
• Para limpiar las super cies sucias, utilice un paño, trapo suave o esponja con jabón
neutro o una solución de detergente. No utilice solventes o abrasivos ásperos.
• El uso convencional de este carro es institucional. No contiene ninguna
parte que pueda ser reparada ni requiere de mantenimiento por parte del
usuario. Si fuera necesario darle mantenimiento, póngase en contacto con
Spectrum Industries para obtener asistencia.
Prevención de accidentes eléctricos:
• Mantenga el interruptor de alimentación en la posición de OFF [apagado],
antes de enchufarlo o desenchufarlo del tomacorriente de pared.
• Apague los dispositivos antes de enchufarlos al carro.
• Revise que la carga total del dispositivo o del equipo no exceda los
12 amperios.
• No enchufe el cable de alimentación a un cable de extensión.
• Revise que el cable de alimentación no tenga ningún daño antes de
utilizarlo. No utilice cables de alimentación que estén dañados.
• Desconecte el cable de alimentación de la toma eléctrica sosteniendo
 rmemente el enchufe. No desconecte el cable de alimentación
tirando solamente del cable.
• No se pare, circule, jale o coloque ningún objeto sobre el cable de
alimentación.
• Para mayor seguridad, enchufe el carro a una conexión a tierra
controlada por un interruptor de circuito GFI (interruptor de fallas de
conexión a tierra).
• Los componentes eléctricos dañados pueden implicar riesgos de
importancia para los usuarios, que no cubrirá la garantía. Un electricista
cali cado es quien deberá realizar siempre las reparaciones.
• Los dispositivos eléctricos no son juguetes. Los niños generalmente no están
conscientes de los riesgos asociados con los dispositivos eléctricos. Este
carro lo deberán utilizar siempre personas adultas o bajo su supervisión.
Advertencia: reubicar equipo de audio y/o video a un mueble que no haya
sido diseñado especí camente para tal uso, puede provocar la muerte o
lesiones graves debido a que puede colapsarse o volcarse sobre un niño.
Advertencia: existe peligro de muerte o lesiones graves si los niños
se suben a un mueble de equipo de audio y/o video. Un control
remoto o juguete colocado sobre el mueble puede alentar a un niño a
subirse y provocar que el mueble se vuelque sobre el chico.
Instrucciones importantes de prevención de accidentes y cuidado
• Lire ce guide d’utilisation avant l’assemblage ou l’utilisation.
• Interdire aux enfants de déplacer l’armoire.
• Déplacer l’armoire lentement et prudemment.
• Utilisation à l’intérieur uniquement. Ne pas assembler et ne pas ranger
l’armoire dans un endroit humide.
• Ne pas boucher les prises d’air de ventilation.
• Éviter le chargement mal réparti de l’équipement sur l’armoire. Un chargement
mal réparti risque de faire basculer l’armoire en déplacement.
• Interdire à quiconque de s’asseoir, de se tenir debout ou de grimper sur l’armoire.
• Passer un chiffon doux ou une éponge, imbibés de solution nettoyante ou de savon
liquide doux, sur les surfaces sales. Ne pas utiliser des solvants rudes ou des abrasifs.
• Cette classe mobile est destinée à un usage collectif. Elle ne contient
aucune pièce susceptible d’être réparée par l’utilisateur et ne nécessite
aucun entretien de la part de celui-ci. Si une maintenance est requise,
communiquer avec Spectrum Industries pour obtenir de l’aide.
Consignes de sécurité en électricité
• Mettre d’abord l’interrupteur sur Arrêt avant de brancher ou de
débrancher la prise.
• Éteindre les appareils avant de les brancher à l’armoire.
• Assurez-vous que la charge totale appareils / équipements n’excède pas 12 A.
• Ne pas brancher le cordon d’alimentation sur une rallonge.
• Véri er que les cordons d’alimentation sont intacts avant chaque
utilisation. Ne pas les utiliser s’il sont abîmés.
• Pour débrancher le cordon de la prise murale, saisir son bouton
isolant et tirer; ne pas tirer le cordon.
• Ne pas marcher, ne pas rouler et ne pas placer des objets sur le
cordon d’alimentation; ne pas le traîner.
• Pour plus de sécurité, brancher l’armoire sur une prise mise à la terre
protégée par un disjoncteur de fuite de terre.
• Les composants électriques abîmés risquent d’exposer les utilisateurs
à de graves dangers; ils ne sont pas couverts pas la garantie.
Toujours con er les réparations à un électricien quali é.
• Les appareils électriques ne sont pas des jouets. Les enfants
n’ont souvent pas conscience des dangers associés aux appareils
électriques. Cette armoire doit donc être toujours utilisée par un adulte,
ou sous la surveillance d’un adulte.
Avertissement - Reloger un équipement audio ou vidéo sur un meuble non
conçu pour supporter cet équipement pourrait entraîner de graves blessures, voire
la mort, à la suite de l’effondrement du meuble ou de sa chute sur un enfant.
Avertissement - Un enfant qui grimpe sur un meuble d’équipement
audio ou vidéo pourrait subir des blessures graves ou mortelles. Une
télécommande ou des jouets placés sur le meuble risquent d’inciter un
enfant à y grimper : le meuble pourrait alors basculer et écraser l’enfant.
Consignes importantes de sécurité et d’entretien
• Read this owner’s manual before assembly or operation.
• Do not allow children to move the cart.
• Proceed slowly and carefully when moving the cart.
• For indoor use only. Do not install or store the cart where it will be exposed to moisture.
• Do not block the ventilation openings.
• Avoid uneven loading of the equipment into the cart. Uneven weight
distribution could cause the cart to tip when the cart is moving.
• Do not allow anyone to sit, stand, or climb on the cart.
• Use a damp, soft-cloth, or sponge, with mild soap or detergent solution to
clean dirty surfaces. Do not use harsh solvents or abrasives.
• This cart is intended for institutional use. It does not have any user-
serviceable parts or user-maintenance requirements. If servicing is
necessary, please contact Spectrum Industries for assistance.
Electrical Safety:
• Keep the power switch in the OFF position before plugging or
unplugging from the wall outlet.
• Turn OFF the devices before plugging them into the cart.
• Ensure total device / equipment load does not exceed 12-amps.
• Do not plug the power cord into an extension cord.
• Inspect the power cords for damage before each use. Do not use
power cords that are damaged.
• Unplug power cord from electrical outlet by gripping the plug. Do not
unplug the power cord by pulling only on the cord.
• Do not step on, drive over, drag, or place objects on the power cord.
• For added safety, plug the cart into a grounded outlet controlled by a
GFI (Ground Fault Interrupter) circuit breaker.
• Damaged electrical components can create signi cant hazards to
users and is not covered by the warranty. Repairs should always be
performed by a quali ed electrician.
• Electrical devices are not toys. Children are often unaware of the
hazards associated with electrical devices. This cart must always be
used by adults or with adult supervision.
Warning - Relocating audio and/or video equipment to furniture not speci cally
designed to support audio and/or video equipment may result in death or serious
injury due to the furnishing collapsing or over turning onto a child.
Warning - Death or serious injury may occur when children climb
on audio and/or video equipment furniture. A remote control or toys
placed on the furnishing may encourage a child to climb on the
furnishing and as a result the furnishing may tip over on to the child.
Important Safety and Care Instructions

0114813R3 Page 7 of 7
© 2019 Spectrum Industries Inc., All rights reserved.
925 FIRST AVENUE, CHIPPEWA FALLS, WI 54729 / 800-235-1262 / 715-723-6750 / WWW.SPECTRUMFURNITURE.COM
Item Warranty Period
Desk, table, cart and lectern chassis 10 Years
Electrical 2 Years
Flat panel monitor arms / gas spring / general parts 2 Years
Adjustable crank / electric legs and accessories 2 Years
Flat panel desk gas spring cylinders 2 Years
Height adjustable columns, lifts & accessories 2 Years
Casters & wheels 2 Years
Keyboard, mouse, trays 2 Years
Locks & keys 2 Years
Tubs, totes and other accessories 1 Year
Chairs
Structural components, including gas cylinders,
wood, metal and plastic parts (i.e., chair frames,
bases and control handles)
7 Years
Consumable items (i.e., casters, glides, etc.) 5 Years
In-stock upholstery 5 Years
Arozzi chairs 2 Years
Customer supplied material No Warranty
© 2019 Spectrum Industries Inc., All rights reserved.
DESIGNED AND ASSEMBLED IN
CHIPPEWA FALLS
WISCONSIN.USA
Spectrum Industries Inc.
is Certi ed ISO 9001:2015
We will make it right for you!
Spectrum is committed to provide complete customer
satisfaction. Each of our products is manufactured from
the best materials available and each product is stringently
monitored throughout the production process through our
Quality Management System.
We expressly warrant that Spectrum products will be of
good quality and workmanship and free from defect for the
period set out in the warranty table from the date of delivery.
This warranty shall not apply to defects or damage resulting
from normal wear and tear, misuse, or unintended use, fail-
ure to follow instructions related to the product’s installation
or intended use, abuse, neglect, improper care, modi cation
or repair not authorized by Spectrum, or any other cause
outside the control of Spectrum. Spectrum will, at its sole
option, either repair or replace the defective product.
See website for complete warranty terms:
spectrumfurniture.com/en/resources/warranty
Dear customer,
Spectrum Industries would like to thank you for your
purchase. Please take a moment to register your product
for valuable warranty and product information. Locate the
product and serial numbers on the label located either on
the inside of the front door, or under the main worksurface.
Record the numbers here to enter online.
If you have any questions or concerns about the product
you received, please contact us.
Product Number:
Serial Number:
spectrumfurniture.com/register
Learn more at:
Warranty
Product Registration
1-800-235-1262
Toll-free HELPLINE
[email protected]