Spectrum Industries 37141 User manual

Assembly InstructionsAssembly Instructions
0192260 Page 1 of 3
Assembly InstructionsAssembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt.
To report information regarding missing parts or damage, to purchase parts
or accessories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
Single Mobile Tablet StandSingle Mobile Tablet Stand
3714137141
4mm
(6) 038702
3/8” Flat steel washer
(5) 044541
1/4-20 x 20mm
JC Bolt
(5) 041943
1/4-20 Locknut
(5) 058055
3/8-16 Acorn nut
(5) 0158926
2” 3/8-16 Stem
caster
(5) 026059
1/4” Flat washer
(1) 0158804
3/8” Split lock washer
(1) 111066
3/8-16 Hex head
(1) 0157715
Base top
(1) 0157709
Lower upright
assembly
(5) 0157712
Leg
(1) Mount
assembly
(1) 0157810
Washer
support
(1) 0157713
Upper upright
assembly
(1) 0158764
Tablet puck
w/ adhesive

0192260 Page 2 of 3
1. Assemble base1. Assemble base
Figure 1.1 Figure 1.2
Figure 2.1
1/4” Flat washer
3/8” Flat
steel washer
3/8-16
Acorn nut
Caster
Leg
1/4-20 Locknut
1/4-20 x 20mm
JC Bolt
Washer support
Lower upright
assembly
3/8” Flat steel washer
3/8” Split lock washer
3/8-16 Hex head
1Attach each leg to the base top with (1) 1/4-20 x 20mm JC Bolt,
(1) 1/4” Flat washer, 1/4-20 locknut. Figure 1.1 2Attach each caster to a leg as shown with (1) 3/8” washer, and (1) acorn nut and tighten securely. Figure 1.2
Attach the lower upright assembly to the base with (1) Washer
support, (1) 3/8” Flat steel washer, (1) 3/8” Split lock washer, and
(1) 3/8-16 Hex head bolt. Figure 2.1. Tighten bolt securely.
Base assembly
2. Assemble uprights2. Assemble uprights
1 2 Place the assembly onto the oor (casters down). Thread the
upper upright into the lower upright. Figure 2.2
Figure 2.2
Base top
Lower upright Upper upright

0192260 Page 3 of 3
925 FIRST AVENUE, CHIPPEWA FALLS, WI 54729 / 800-235-1262 / 715-723-6750 / WWW.SPECTRUMFURNITURE.COM925 FIRST AVENUE, CHIPPEWA FALLS, WI 54729 / 800-235-1262 / 715-723-6750 / WWW.SPECTRUMFURNITURE.COM
© 2020 Spectrum Industries Inc., All rights reserved.
4. Attach puck to tablet4. Attach puck to tablet
1. Expose the adhesive on the puck.
2. Center the puck on the back of the tablet or smartphone. Figure 4.
3. Press and hold rmly for about 30 seconds to secure.
Figure 4
3. Attach mount3. Attach mount
1. Place mount over upright and adjust to desired height. Figure 3.
Figure 3
Upright
Puck
5. Install tablet and adjust5. Install tablet and adjust
Set the tablet into the mount. Figure 5.1.
Figure 5.2
Note: The adhesive used to mount the puck to the
tablet will not work with silicone-based cases.
Figure 5.1
The fully adjustable mount provides convenient height, dual-
axis rotation, and tilt adjustments. Figure 5.2.
1 2