Spectrum Industries 68205 User manual

Stepped-Height Bracket for
Instructor Media Console
#68205
Instructions:
Tools Required:
4mm Hex Wrench (included)
Before you begin, please make sure all parts and proper quantities are
included. Any parts damaged during shipment must be reported within
15 days of receipt. To report information regarding damages or if you
have any questions, please call 1-800-235-1262.
To purchase parts or accessories, please contact us at
www.spectrumfurniture.com
1-800-235-1262
Thank you for choosing Spectrum products!
1. Bracket Installation
A. Before installation, assemble and attach the lower (29"H) wall filler panels, equipment
racks and any end-support or mid-support legs. The adjacent wall filler panel will
need to be attached to the 36" equipment rack before the bracket is installed.
B. Align the bracket with the (2) mounting holes in the side of the 36"H equipment rack as
shown. Figure 1.
C. Attach with (2) 1/4-20 x 15mm JC Bolts, and tighten securely.
(1) 025039
4mm Hex Wrench
(4) 052605
1/4-20 x 15mm JC Bolt
0109103X Page 1 of 2
Stepped-Height Bracket for
Instructor Media Console
#68205
Instructions:
Tools Required:
4mm Hex Wrench (included)
Before you begin, please make sure all parts and proper quantities are
included. Any parts damaged during shipment must be reported within
15 days of receipt. To report information regarding damages or if you
have any questions, please call 1-800-235-1262.
To purchase parts or accessories, please contact us at
www.spectrumfurniture.com
1-800-235-1262
Thank you for choosing Spectrum products!
1. Bracket Installation
A. Before installation, assemble and attach the lower (29"H) wall filler panels, equipment
racks and any end-support or mid-support legs. The adjacent wall filler panel will
need to be attached to the 36" equipment rack before the bracket is installed.
B. Align the bracket with the (2) mounting holes in the side of the 36"H equipment rack as
shown. Figure 1.
C. Attach with (2) 1/4-20 x 15mm JC Bolts, and tighten securely.
Figure 1
29" Wall Filler Panel
(1) 025039
4mm Hex Wrench
(4) 052605
1/4-20 x 15mm JC Bolt
1/4-20 x 15mm
JC Bolt
36" Equipment Rack
Stepped-Height
Bracket
1/4-20 x 15mm
JC Bolt

A. Set the work surface onto the installed 29" wall filler panel(s) and the stepped-height bracket as shown in Figure 2.
B. Align the mounting holes and attach the work surface to the bracket with (2) 1/4-20 x 15mm JC bolts.
2. Work surface Installation
Underside of
Work surface
36" Equipment Rack
1/4-20 x 15mm
JC Bolt
0109103X Page 2 of 2
A. Set the work surface onto the installed 29" wall filler panel(s) and the stepped-height bracket as shown in Figure 2.
B. Align the mounting holes and attach the work surface to the bracket with (2) 1/4-20 x 15mm JC bolts.
2. Work surface Installation
Underside of
Work surface
Figure 2
Stepped-Height
Bracket
1/4-20 x 15mm
JC Bolt
36" Equipment Rack
29" Wall Filler Panel
1/4-20 x 15mm
JC Bolt
0109103X
Page
2
of
2