Spectrum Industries 97525 User manual

0192208 Page 1 of 2
Assembly InstructionsAssembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt.
To report information regarding missing parts or damage, to purchase parts
or accessories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
6RU Adjustable Slim Rack Cube6RU Adjustable Slim Rack Cube
for Slim Lecternsfor Slim Lecterns
9752597525
Figure 1
(2) 0154887
Rack panel
(4) 058516
Rack rail (10.5”)
(14) 0100167
8-32 x 1/2” PH
thread-cutting
screw
1. Assemble rack cube1. Assemble rack cube
1. Align the rack panels, four rack rails, and brackets as
shown. Note two positions available on audience-side for
Slim, or Slim adjustable lectern. Figure 1.
2. Assemble with (12) 8-32 x 1/2” PH thread-cutting screws.
3. Tighten screws securely.
Rack rail
Rack panel
8-32 x 1/2” PH thread-
cutting screw (12 req’d)
Rack panel
Instructor-side
Audience-side
Slim Lectern
Slim Adjustable
Lectern
Note: Do not tighten fasteners completely until all
have been installed. Keeping them loose will help
with alignment during assembly.

0192208 Page 2 of 2
925 FIRST AVENUE, CHIPPEWA FALLS, WI 54729 / 800-235-1262 / 715-723-6750 / WWW.SPECTRUMFURNITURE.COM925 FIRST AVENUE, CHIPPEWA FALLS, WI 54729 / 800-235-1262 / 715-723-6750 / WWW.SPECTRUMFURNITURE.COM
© 2020 Spectrum Industries Inc., All rights reserved.
Figure 2.1
Figure 2.3
2. Install rack cube2. Install rack cube
1. Place the rack cube assembly onto the base panel of lectern. Figure 2.1.
2. If the cube needs to be secured to the lectern, remove the audience-side
panel. (Lift up, then out). Figure 2.2.
3. Align with the mounting holes in the base panel and use (2) 8-32 x 1/2”
PH thread-cutting screws (1 through each bracket) to secure to base
panel. Figure 2.3.
Figure 2.2
8-32 x 1/2” PH thread-
cutting screw (2 req’d)
Base
panel
Note: The rack cube provides 6RU of rack space and
is easily removed from the lectern. This simplies
installation of equipment and provides the ability to in-
tegrate equipment remotely. The cube can be installed
into the lectern at a later date or when convenient.
Audience-
side panel