SPEEDPLAY DRILLIUM PEDALS Reference guide

¨
10151 PACIFIC MESA BLVD., #107
SAN DIEGO, CA 92121 [phone]
1-800-468-6694 www.Speedplay.com
SPEEDPLAY
DRILLIUM
PEDALS
With 9/16” Spindle Threads
HAND OVER INSTRUCTIONS TO CUSTOMER
IMPORTANT
FAILURE TO FOLLOW THESE
INSTRUCTIONS AND WARNING
STATEMENTS BEFORE ASSEMBLING
AND USING THIS SYSTEM MAY
RESULT IN SERIOUS PERSONAL INJURY
LIMITED (TWO YEAR) WARRANTY
This Speedplay product is warranted under normal usage against defects in workmanship and
materials to the original purchaser for a period of two (2) years from the date of purchase free of
charge provided the claim is made within thirty (30) days of the discovery of the defect and the
following condition is met: The purchaser must obtain advance authorization by calling Speedplay at
800-468-6694 toll free or [phone] before returning any product for warranty inspection. A
Return Authorization (RA) number will be issued and must conspicuously appear on the outside of the
product's packaging. The issuance of an RA number does not constitute acceptance of the claim. The
determination of whether the claim is covered by this warranty is within the sole discretion of
Speedplay, Inc. The part(s) requiring service or replacement must be returned to Speedplay, either by
the purchaser or a Speedplay dealer. Insurance, handling and transportation charges for service shall
be borne by the person desiring service. This warranty is limited to the repair or replacement of this
product. Speedplay, at its option, will either repair or replace any defective parts.
For a warranty claim to be honored, the following information must accompany the returned product:
a) A copy of the original dated receipt or other proof of retail purchase.
b) A detailed description of the problem with the product along with the R.A. number.
c) Estimate of product usage (in accumulated mileage).
d) Your name, street address (no P.O. boxes) and phone number(s) where you may be reached.
e) The product must be securely packaged and sent insured through a traceable shipper.
The repaired product or replacement will be returned to the purchaser or the Speedplay dealer
usually within two weeks. Product furnished as replacement will continue to be covered under this
warranty until two years after the date of original purchase.
Limits and exclusions: Not covered by warranty is damage resulting from normal wear and
deterioration occurring from use, accidents, neglect, improper assembly, misuse, abuse, lack of
reasonable or proper maintenance, corrosion, any damage resulting from causes other than defects in
materials and workmanship; failure or loss by accident, alterations, repairs improperly performed, or
replacement parts improperly installed, modifications not recommended or approved in writing by
Speedplay, labor costs for removal, or compensation for inconvenience or loss of use while the product
is being repaired or replaced. This warranty also does not cover cosmetic imperfections in the surface
finish, or appearance of the product which were apparent or discoverable at the time of purchase, or
damage during shipment of the product.
There are no warranties which extend beyond the face hereof. All warranties implied by state law,
including the implied warranties of merchantability and fitness for a particular purpose, are expressly
limited to the duration of the limited warranty set forth above. Some states do not allow limitations on
how long an implied warranty lasts, so the above limitation may not apply to you. With the exception of
any warranties implied by state law as hereby limited, the foregoing express limited warranty is
exclusive and in lieu of all other warranties, guarantees, agreements and similar obligations of
manufacturer or seller.
Speedplay is not liable for indirect or consequential damages in connection with the use of this
product. Some states do not allow the exclusion or limitation of incidental or consequential damages,
so the above limitation or exclusion may not apply to you.
No person, independent representative, agent, distributor, dealer (including any Speedplay dealer) or
company is authorized to change, modify or extend the terms of this warranty in any manner
whatsoever. This warranty gives you specific legal rights; you may also have other rights which vary
from state to state.
Rev. 2014.01.15Web

GENERAL SAFETY INFORMATION
TO AVOID SERIOUS INJURIES:
Bicycle dealers -- be sure to give all instructions and warranty information to end customer.
Read all instructions carefully before using this product. Failure to follow these instructions and warning
statements before installing and using these pedals may result in severe injury. Improper installation
and/or use of this product can result in severe injury. Riding bicycles is an inherently dangerous activity.
Speedplay Drillium Pedals have sharp studs (spikes) to improve shoe traction and prevent a rider's foot
from slipping off the pedal. Sharp spikes can cause bodily damage if they come in contact with
unprotected skin/flesh. Never ride barefoot. Always use protective shin guards and protective footwear
when riding Drillium Pedals.
Never ride with Speedplay Drillium Pedals that are improperly installed, modified or excessively worn.
Remember to check the Pedals periodically for wear or damage. When parts exhibit damage or are
visibly worn, replace them immediately. A loose, over-tightened, damaged, unlubricated, or worn part
may cause the Pedal to malfunction unexpectedly and cause a fall that could result in severe injury.
Speedplay Pedals are not equipped with reflectors. Speedplay Pedals are not intended
for nighttime or other reduced visibility riding conditions. Do not expect Speedplay Pedals to
improve your chances of being seen in conditions of darkness or reduced visibility. Always use a proper
headlight and taillight when riding at any time of reduced visibility. Always wear a helmet when riding.
If you have any doubts about your ability to correctly install Speedplay Pedals, or if you are
unsure about the extent of wear to any Speedplay Pedal, please return it to your dealer for proper
installation or inspection, or call Speedplay at 1-800-468-6694 (Pacific Standard Time). If you have any
questions or concerns about issues such as the intended use of the Pedals, or the maintenance of this
product, call Speedplay toll free at 1-800-468-6694 (Pacific Standard Time).
Speedplay Drillium Pedals require routine lubrication. Keep all
Pedal parts clean of debris and properly lubricated. To prevent serious injury while riding, be sure your
entire bicycle is adequately maintained and that all components are correctly installed and adjusted.
Failure to follow these instructions and warning statements before using these Pedals may result in
severe injury.
Drillium Drillium
Drillium
Drillium
See Routine Maintenance Section.
!WARNING
Routine Drillium Pedal Bearing Lubrication
The precision bearings in Speedplay Drillium Pedals require greasing
.
at least every 2000 miles or
every three months
Speedplay Drillium Pedals require service if they either spin without the slight resistance of
the protective “O” ring or if any grinding sensation is detected.
.
. Grease bearings more frequently if used in unusually wet or dusty conditions.
.
Speedplay Grease Guns and Grease are available from Speedplay retailers or call Speedplay at 1-800-
468-6694.
IMPORTANT - Always use a high
quality WATERPROOF BEARING GREASE Never use a liquid spray lubricant or oil on Speedplay
Drillium Pedal bearings
NOTE: Damage due to the lack of lubrication is not covered by Speedplay's warranty policy
!CAUTION
PEDAL MOUNTING INSTRUCTIONS
Mount the Pedals to the bicycle crank arms. Use a 15mm open-ended wrench to install the Pedals on
the crank arms. The right Pedal has right-hand threads and the left Pedal has left-hand threads.
Minimum tightening torque = 300 inch pounds. NOTE: Drillium Pedals have 9/16” spindle threads.
If Pin Screws become worn
out or damaged, please
replace. For additional pin
screws, contact your local
dealer or Speedplay
[phone].
Routine Maintenance
Instructions for Quick and Easy Drillium Pedal Bearing Lubrication Using the Built-in Grease Port
Use Grease Only! Never use oil or spray lubes on bearings.
1. Remove the Grease-Port Screw with a #1 Phillips screw driver.
2. Insert needle-type grease injector gun into grease port hole.
3.
4. Wipe off excess grease and reinstall Grease-Port Screw. Note: Over tightening the Grease-Port Screw may strip the
threads of the dust cap.
Pump gun slowly while turning Drillium Pedal body slowly until clean grease is visible at spindle end of Pedal body.
!CAUTION
The left and right pedals are
different. Left pedals are
marked “L” on the wrench
flats. Right pedals are marked
with “R” on the wrench flats.
Drillium Pedal Disassembly
Lubrication and Reassembly
Tools Needed: 8mm hex key, 9mm thin-wall socket, 15mm open-end wrench.
Step 1. Remove the Dust cap from the pedal body with an 8mm Hex key.
Step 2. Remove the spindle nut from the end of the spindle with a 9mm thin-wall socket.
Step 3. Pull the spindle out of the Drillium Pedal body.
Step 4.
Use a high-quality, waterproof grease on the needle bearing and use a new “O” ring (grease it too) when overhauling Drillium
Pedals. Any worn or damaged parts should be replaced. Reassembly is accomplished by reversing the order of the above
instructions.
Over
tightening may cause damage to the dust cap.
Push the two cartridge bearings out the dust cap side of the Pedal body (a Bic or similar pen works).
Note - Do not attempt to remove the needle bearing from the Pedal body. The needle bearing is permanently installed
and should not be removed for service.
TIGHTEN SPINDLE NUT SECURELY (75 - 85 INCH POUNDS).
DO NOT over tighten the composite dust cap. Maximum tightening torque is 60 inch pounds.
Dust
Cap
Spindle
Nut
Bearings
Pedal Body
O-Ring
Spindle
Dust
Shield
Rev. 2014.01.15Web
!WARNING
!CAUTION