SPI TIZER-X User manual

www.spinfracolor.com
TIZER-X
User Manual
Touchless Sanitizer Dispenser

Caution
Note On/Off Indication light
Handle With care
Proper Power line
Do not Tamper
Power Off while Refill
Keep away from Hot Place
Keep away from children
Keep away from Fire

Content
Thank you for purchasing TIZER-X Touchless Sanitizer Dispenser. We are
happy to be part of preventing the spread of any infectious disease via
surface touch. Please take few moments to read the manual and get
acquainted with TIZER-X to get the best performance.
In case of any problem please don’t hesitate to contact us
SPI Equipments India (P) Ltd
Coimbatore
Office [phone]
.......................................................... 1
.......................................................... 1
.......................................................... 1
.......................................................... 1
Filling Option
Power Explanation
Usage
Troubleshoot
.......................................................... 2Product Composition
.......................................................... 3Mounting Hole
.......................................................... 3Warranty

Startup
Filling sanitizer into the TIZER-X consist of two steps,
1. Check if the Power Supply is Turned OFF
2. Filling process
Filling process
(* please activate the machine few times to fill the Tubes.)
Power on/off
Usage
Troubleshoot
Open the lid on top of the machine
Using a Funnel fill it till the max level indication point
Close the lid Properly
Turn on the machine to start the TIZER-X
Plug the machine to the nearest power socket
make sure everything is plugged properly
Turn On the Switch
Incase power ON Switch is OFF
Please check the fuse mentioned in the diagram and replace it
with the replacement Fuse
Simply put your hand under the Dispensing area
TIZER-X will dispense the desired amount of 2ml
Rub it thoroughly using two hands
1

ProductComposition
2
Liquid Top up
Lid
230V AC-IN
Power ON/OFF
Indication
Fuse
Low Stock
Indication
Visual Level
Indicator
Dispensing
Area

mountinghole
Warranty
Name ...................................................
...................................................
...................................................
...................................................
...................................................
...................................................
Serial No
Date of Purchase
Phone No
Address
Warranty
(* Valid from the date of purchase)
3
Mounting Screw
Hole
200 mm