Spid Elektronik PS-01 User manual

SPID Elektronik
PSU DC
22V / 45A / 1000 W
15V / 10A / 150 W
For cabinet 19” height 1U
PS-01

Table of Contents
Table of Contents ....................................................................................................................... 2
Description ................................................................................................................................. 3
1.LEDs ..................................................................................................................................... 4
2. Switch. ................................................................................................................................ 4
3.Power input ......................................................................................................................... 4
4. Power Output U2................................................................................................................ 4
5. Power Output U2................................................................................................................ 4
6. Output to power electronics U1......................................................................................... 4
7. Output to power electronics U1......................................................................................... 4
8. Fans..................................................................................................................................... 4
9. Power RS-150-15. ............................................................................................................... 4
10. Power RSP-1000-24. ........................................................................................................ 4
11. Power cord ....................................................................................................................... 4
A/C wiring diagram..................................................................................................................... 5
Power Supply RSP-1000.............................................................................................................. 6
Power Supply RS-150.................................................................................................................. 7

Desription

1. LED indicator.
U1 –when they lit on outputs U1 (6, 7 on the pictures) there is voltage 15V, 5A, 150W.
Used to power supply other modules electronic. PSU RS-150-15 ( 9 on the pictures )
When they lit on outputs U2 ( 4, 5 on the pictures ) there is voltage 22V, 25A, 1000W
Used to power supply power modules. PSU RSP-1000-24 ( 10 on the pictures )
2. Switch.
3. Power supply input.
The power connection must be consistent with the description enough - N phase, L neutral
and earth (ground). To connect adapter to network appropriate cable is needed (11 on the pictures ).
4. Output for U2 power
Output is connected to power supply APS-1000 by its own fuse 25A. Maximum output
voltage can not exceed 25A. Total current on power outputs (4 and 5 on the pictures) can not be
greater than 45A. Above this value, PSU shuts off automatically (overcurrent protection).
5. Output for U2 power
Check caption 4.
6. Output for power supplying U1 electronics.
Connected to power supply RS-150-15 through its own fuse 5A. Maximum output current can
not exceed 5A. The total current drawn from both outputs (6 and 7 on the pictures) can not be
greater than 10A.
Above this value, power supply shuts off automatically (overcurrent protection).
7. Output for power supplying U1 electronics
Check caption 6.
8. Fans.
When temperature exceedes 50 degrees additonal fans turn on (8 on the pictures )
9. PSU RS-150-15.
10. PSU RSP-1000-24.
11. Power Cord.

Power supply wiring diagram

Zasilacz RSP-1000

Zasilacz RS-150