SPL StreetBop S5418SMG User manual

SoundPercussionLabs.com
S5418SMG VELOCITY SERIES 4PC SHELL PACK
Cymbals, stands, pedal
and throne not included.

Velocity Series Drum Set Owner’s Manual
2
Thank you for purchasing this shell pack kit from Sound Percussion Labs’ outstanding line of drums, percussion
and hardware. They offer unlimited enjoyment and will create a solid foundation for your playing.
These instructions should be used as only a general guide. Make adjustments for your comfort and playing
style. Experimentation can lead to unique and great experiences in your playing and your music. So
experiment with your setup and enjoy!
Also, be sure to visit www.soundpercussionlabs.com for more information on Sound Percussion Labs
products and support.
Table of Contents
S5418SMG Parts Index 3
Bass Drum Head Assembly 4
Bass Drum Leg Spur Assembly 4
Floor Tom Head Assembly 5
Floor Tom Leg Assembly 5
Attaching the Suspension Mount 6
Mounting the Tom to the Bass Drum 6
Top View of Shell Pack Drum Placement 7

SoundPercussionLabs.com
3
SET INCLUDES:
Drums:
18”x16” Bass Drum
13”x13” Floor Tom Drum
10”x 7” Mounted Tom Drum
13”x 5” Snare Drum
Three Floor Tom Legs
Tom “L” Arm Holder
Suspension Mount
Drum Heads:
18” Coated Batter Side Bass Drum Head
18” Smooth White Resonant Side Bass Drum Head
13” Coated Batter Side Floor Tom Drum Head
13” Smooth White Resonant Side Floor Tom Drum Head
Hoops:
Two Floor Tom Hoops
Two Bass Drum Hoops
Pair of Drumsticks
Bag Packaged Parts:
16 Long Tension Rods for Bass Drum
12 Short Tension Rods for Floor
16 Bass Drum “Claws”
Drum Key
Washers
B
A
D
E
A
C
B C
D
E
G
F
H
IJ K L
MN
O
F
G
H
I
J
K
L
M
N
O
4-Piece Parts Index
S5418SMG

Velocity Series Drum Set Owner’s Manual
4
1. Place smooth white resonant side bass drum head with the SPL
logo on front of the bass drum shell.
2. Place bass drum hoop onto drum head.
3. Insert long tension rod / washer / bass drum claw hook assembly
into bass drum lug. Make sure claw hook is secure on the bass
drum hoop. Tighten with your fingers.
4. Repeat this for all the lugs on one side of the drum.
5. After all tension rods on one side are finger tight, use the drum key
to tighten the #1 tension rod 3 turns. Follow these steps for tension
rods #2 through #8 in a criss-cross pattern as shown. Repeat this
pattern, tightening each rod one half turn until the drum head is
taut and wrinkle free.
6. Repeat for the coated white batter head on the player’s side of
the drum.
Bass Drum Head Assembly
Washer
Bass Drum Hoop
Bass Drum Claw
Long Tension Rod
Shell
Bass Drum Lug
1
2
3
4
5
6
7
8
FRONT - Audience Side
Bass Drum Leg Assembly (Spurs)
1. Loosen wing nut on spur assembly.
2. Rotate the bass drum spur down and forward.
3. Tighten the bass drum spur into the forward position.
Wing Nut
Spur Assembly
Assembly Instructions: S5418SMG

SoundPercussionLabs.com
5
Floor Tom Head Assembly
Drum Key
Washer
Hoop
Short Tension Rod
Shell
Lug
1. Place coated white batter drum head on top of the drum shell.
2. Place the metal hoop over the drum head, aligning the holes in the
hoop with the drum lugs.
3. Insert short tension rods with metal washers through the holes
in the hoop.
4. Thread the tension rods into the lugs and finger tighten.
5. Using the drum key, gradually tighten each tension rod in equal
amounts using the same criss-cross pattern as done on the
bass drum until the head is taut and wrinkle free.
6. Repeat above steps for the bottom of the drum with the smooth
white resonant side drum head.
Floor Tom Leg Assembly
Floor Tom Leg
Bracket
Wing Nut
1. Insert floor tom leg into the bracket.
2. Tighten the wing nut on the bracket.
3. Repeat for remaining legs.
4. Adjust height of legs for comfortable playing style.

Velocity Series Drum Set Owner’s Manual
6
Mounting the Tom to the Bass Drum
1. Insert long section of the tom L-arm holder a few
inches into the bass mount.
2. Tighten the wing nut on the bass mount.
3. Loosen the wing nut on the tom arm and position
the tom arm as shown and retighten the wing nut.
4. Place the mounted tom onto the tom arm and
tighten the wing nut on the tom mount.
5. Adjust height and angle of toms for comfortable
playing style.
6. Secure memory locks for additional stability and
memory by tightening the collar of the memory lock
to the mounts of the bass and tom. The next time
you need to set up the drums, the memory locks will
ensure the same angle and height.
“L” Arm
Tom Mount
Memory Locks
Wing Nut
Bass Mount
Wing Nut
Attaching the Suspension Mount
1. The 10” tom utilizes a suspension mount that allows the shell to fully resonate.
2. Remove 4 tension rods from the top of the drum, accounting for position of the drum badge to
face the audience.
3. Then position suspension mount under the drum hoop and replace the 4 tension rods.
4. The Tom is now ready to use.

SoundPercussionLabs.com
7
Top View of Shell Pack
Drum Placement: S5418SMG
Bass Drum
Mounted
Tom
Floor
Tom
Snare
One (1) Year Limited Warranty
Subject to the limitations set forth below, Sound Percussion Labs™ hereby represents and warrants that the components of this product shall be free from defects in
workmanship and materials, including implied warranties of merchantability or fitness for a particular purpose, subject to normal use and service, for one (1) years
to the original owner from the date of purchase.
Limits of Liability
Retailer and manufacturer shall not be liable for damages based upon inconvenience, loss of use of product, loss of time, interrupted operation or commercial loss or
any other incidental or consequential damages including but not limited to lost profits, downtime, goodwill, damage to or replacement of equipment and property,
and any costs of recovering, reprogramming, or reproducing any program or data stored in equipment that is used with Sound Percussion Labs’™ products. This
guarantee gives you specific legal rights. You may have other legal rights which vary from state to state. Some states do not allow limitations on how long an implied
warranty lasts, so the above limitation may not apply to you.
Sound Percussion Labs
P.O. Box 5111
Thousand Oaks, CA 91359-5111
All trademarks and registered trademarks mentioned herein are recognized as the property of their respective holders.
1406-10186