SPT Charge Dock User manual

Charge Dock
User Guide

System Components
Charge Dock
Power Panel
Top View

USB Port
For connecting the charge dock to your computer/laptop.
USB LED
Indicates charge dock is connected to your computer/laptop.
Power LED
Indicates the charge dock power is on.
Power Switch
Press switch to turn charge dock on and off.
SPT USB Ports
For connecting SPT devices (sold separately).
Storage Compartment
For storing AC/DC Power Pack when not in use.
AC/DC Power Pack Connector
System LED
Indicates charge dock is ready to use.
Using the Charge Dock
Plug dock into a power source with AC/DC Power Pack.
Insert USB Cable into the charge dock and connect to USB port of computer.
Turn charge dock on via the power switch.
Firmly insert SPT device/s into SPT USB Port/s. Blue battery LED on SPT device will
light up indicating it is connected and charging.
To Download:
Open the Bridge application on your computer.
Find the bridge installer at gametraka.zendesk.com
In Bridge, select download and the connected SPT devices will appear in the
application window.
When devices appear, select download and the data from the SPT devices will start
to download. The SPT device LED’s will start a light up cycle when downloading.
Once the SPT devices are successfully downloaded, it is advised to erase the data
from the devices in bridge to maintain optimum recording performance.

WARRANTY
This product carries a
comprehensive materials
and labour warranty.
For more details visit
www.sptgps.com
GLOBAL HEADQUARTERS
[phone]
1/168 Hoddle Street,
Abbortsford, Victoria,
Australia
[email protected]
STAY IN THE KNOW
Find further information and
instructional videos at
www.sptgps.com
TERMS AND CONDITIONS
View our terms and conditions at
sptgps.com/terms-and-conditions