
FAN OPERATION
Speed Control Knob
SYMBOL FUNCTION
0 Off
1 Low
2 Medium
3 High
• Turning the speed control knob to “0” will set the fan to “OFF” position.
• Suggested fan speed:
o Fan speed 1 (low): when indoor temperature is lower than 84°F.
o Fan speed 2 (med): when indoor temperature is between 84 ~ 90°F.
o Fan speed 3 (high): when indoor temperature is higher than 91°F.
Note: Above are recommended settings, fan speed can be set according
to your own preferences.
Fan Orientation
Wind orientation can be adjusted manually as follows (please refer to Fig. 1):
• A: adjust to 180°angle.
• B: adjust to 90°angle.
• C: adjust to 90°angle.
Fig. 1
OPERATING INSTRUCTIONS
• Always unplug the appliance before cleaning.
• Do not immerse the fan in water or other liquids and never allow water to
drip onto the motor housing.
• Use only a soft, damp cloth to gently wipe the outer surfaces of the fan.
• To clean between grills, we recommend using a pipe cleaner, flexible dust
wand, vacuum cleaner or compressed air to gently remove dust.
• Do not use gasoline, paint thinner or any other corrosive cleaning solutions.
• If the fan will not be in use for an extended period of time, you may leave
the fan assembled. Cover to protect from dust. Store in a cool, dry place.
Your Guarantee
If this product is found to be faulty as a result of faulty materials or Workmanship within
one year from date of purchase, it will be repaired free of charge.
This guarantee is subject to the following terms:
• Sunpentown must be notified of the fault.
• Proof of purchase must be presented to Sunpentown’s nominated representative.
• The warranty will be void if the product if modified, misused or repaired by an
unauthorized person.
• The warranty after repair will not be extended beyond the original one-year period.
• All replacement parts will be new or reconditioned.
• Parts, which are replaced, become the property of Sunpentown.
• The warranty applies for the use of the product in the USA only.
What is NOT COVERED:
• Warranty does not include freight charges.
• Incidental or consequential damage caused by possible defects with this product.
• Damage to product caused by improper power supply voltage, accident, fire, floods
or acts of nature.
• Failure of product resulting from unauthorized modifications to the product.
• Improper installation or failure to perform the necessary maintenance.
This GUARANTEE is in addition to your Statutory Rights
Sunpentown Int’l Inc.
14625 Clark Ave, City of Industry, CA 91745
Tel: 626-336-2299 · Fax: 626-336-7116
service@sunpentown.com · www.spt-usa.com
CARE AND MAINTENANCE