SPT SH-113FB User manual

PORTABLE WARMER
SH-113FB (Black)
SH-113FP (Pink)
SH-113FW (White)
User manual
Thank you for your purchase. Please read this user manual thoroughly
before using. Keep in safe place for future reference.
This product contains Li-Batteries inside. Before initial
use or after a long period of non-usage, please fully
charge the warmer.
* Be cautious of low temperature burn.
* Li-Batteries are rechargeable up to 500 times and will
retain up to 80% of standard capacity.
PART IDENTIFICATION
Power Key
(On/Off, High,
Low)
Indicator Light
front back
Mini USB
interface (B-
female socket)
Heat plate
Lanyard hole
USB to Mini USB cable
USB to AC power adapter
CHARGING
USB power
Personal computer / laptop
Connect Mini-USB plug of dedicated charging line into
warmer’s Mini-USB socket.
Connect USB plug of dedicated charging line to
standard USB equipment, such as PC, notebook, etc.
* While charging, unit will power off (heat function
stops) and Power key will not respond.
When charging is complete, all lights will illuminate
with no rotation.
* Charging time is approximated 5 hours.
Disconnect cable when charging is completed.
* Charge unit within ambient temperature of 32-104°F.
* If charging causes static in radio or TV, please relocate unit to a
different location.
OPERATING INSTRUCTIONS
Cold hands
Backaches
Muscle pain
Menstrual pain
In OFF mode, press and hold the Power Key for 3
seconds to turn on warmer. Lights will rotate twice
(clockwise)
Warmer will begin to heat in Low setting.
Double click the Power Key to switch between Low
and High setting.
To turn off warmer, press and hold Power Key for 3
seconds. Lights will rotate twice (counter-clockwise).
Heat function will turn off when warmer is in charge.
When using the warmer in very cold weather, the
heating temperature may not be sufficient enough. To
isolate from cold environment, it is suggested to wrap
the warmer with cloth, such as a sock or glove.
* Only the metal side of the warmer will heat.
* Power Key doesn’t work in charge mode.
REMAINING BATTERY CAPACITY
Indicated once after warmer is turned on (after the lights rotate twice
clockwise).
LIGHTS STATUS
CAPACITY
Lights step slowly from 1 to 4
then back from 4 to 1
≤100%
Lights step slowly from 1 to 3
then back from 3 to 1.
≤75%
Lights step slowly from 1 to 2
then back from 2 to 1
≤50%
prepare to charge
Light 1 blinks
≤25%
low capacity
please charge soon
LIGHTS STATUS
LIGHTS STATUS
INDICATION
Two lights blink slowly on and off
Heating in low setting
Four lights blink slowly on and off
Heating in high setting
Four lights constantly rotate counter-
clockwise
Charging
Four lights remain on
Charging completed
Fast clockwise rotation (twice)
Turning on
Fast counter-clockwise rotation (twice)
Turning off
HEATING TEMPERATURE
Heat
Setting
Highest
Temperature*
Average
Temperature**
Usage
Time***
Low
104°F
100°F
Approx 10 hrs
High
113°F
106°F
Approx 7 hrs
* Highest temperature: temperature standing after 1 hour.
** Average temperature based on 68°F ambient temperature.
*** Usage time may vary due to different ambient temperature.
SPECIFICATION
Model
SH-113F
Input
5V –1A
Dimension
3.57L x 2.6W x 0.8H inches
Weight (unit only)
3.175 oz.
Heat temperature range
100°F ~ 113°F
Operating temperature range
14°F ~ 113°F
Batteries (inside)
Li-batteries 3.7V 2600mAh
Charge time
Approx 5 hours
Heating time
Approx 7 ~ 10 hours
CAUTION
Do not use warmer
in high moisture
environments, such
as bathroom.
Do not place in
oven; keep away
from heat sources
Avoid impact
Do not use near
flammable or
explosive objects

Stop using if unusual
smell, discoloration
or deformation
occurs
To prevent warmer
from dropping, do
not place warmer
on sloped surfaces
If liquid from warmer
leaks and comes in
contact with eyes,
flush with clean
water immediately
and consult a
physician
Keep away from
reach of young
children. Keep
close supervision
when used by child
What is low-temperature burn?
Low temperature burn occurs when body is in prolong contact with an
object that has a temperature slightly higher than body temperature.
Symptoms may include redness and blistering.
Avoid low-temperature burn
This product is controlled by a microcomputer ship, which is designed
with comprehensive consideration of temperature that can cause low-
temperature burn. To prevent low-temperature burn:
Do not place warmer on one specific area for too long
Stop using immediately if you sense something unusual
Do not use while sleeping.
TROUBLESHOOTING
SYMPTOM
POSSIBLE CAUSE
TREATMENT
Not heating
Low capacity
Charge
Power key doesn’t
respond
Unit is charging
Stop charge or wait
till charge complete
Warmer’s usage
time is shorter
Unit not fully charged
Charge till full
Reached batteries’
lifespan. Batteries’
capacity reduces
slightly with each
charge
Replace batteries
Low ambient
temperature
Wrap warmer with
cloth
Long charging time
External temperature
too high or too low
Charge where
ambient
temperature is
between 32°F ~
104°F
Cannot charge
(lights do not rotate)
USB cable not
inserted firmly
Check both ends
for secure
connection
USB equipment has
no 5V output
Try a different
equipment
CLEANING
Wipe product with soft and clean cloth. Do not use wet or damp clost
as it may cause malfunction. Do not use alcohol, thinner, gasoline or
cleanser.
ENVIRONMENTAL PROTECTION
Product contains Li-Batteries, to avoid polluting the environment, do
not dispose dead batteries in garbage, contact your local city hall for
recycling centers.
Your Guarantee
If this product is found to be faulty as a result of faulty
materials or workmanship within one year from date of
purchase, it will be repaired free of charge.
This guarantee is subject to the following terms:
Sunpentown must be notified of the fault.
Proof of purchase must be presented to Sunpentown’s
nominated representative.
The warranty will be void if the product if modified,
misused or repaired by an unauthorized person.
The warranty after repair will not be extended beyond
the original one-year period.
All replacement parts will be new or reconditioned.
Parts, which are replaced, become the property of
Sunpentown.
The warranty applies for the use of the product in the
USA only.
What is NOT COVERED:
Warranty does not include freight charges.
Incidental or consequential damage caused by
possible defects with this product.
Damage to product caused by improper power supply
voltage, accident, fire, floods or acts of nature.
Failure of product resulting from unauthorized
modifications to the product.
Improper installation or failure to perform the
necessary maintenance.
This GUARANTEE is in addition to your Statutory Rights
SUNPENTOWN INTERNATIONAL INC.
14625 Clark Ave, City of Industry, CA 91745
Tel: [phone] · Fax: [phone]
[e-mail]
www.sunpentown.com