Square Jellyfish Jelly Remote User manual

Thank you for purchasing the Square Jellysh
4-button Jelly Remote. This device is designed
to communicate with your smartphone or
devices via Bluetooth. To set up your remote,
please follow these instructions.
Android or Apple –
The remote is congured
for the Apple devices.
If you have an Android
device perform the
following: Remove the
battery cover and remove
the battery. Gently slide
the small switch on the
PCB down for Android.
Replace battery and cover.
(For the Apple system the remote can pair with iPhone,
iPod, iPad and Apple Computers with Bluetooth. Note
that not all functions are available on computer systems
or smartphones. With the wide range of Android phones
capability is unknown.)
Pairing – Press and hold (about 5
seconds). The remote is now in the pairing
mode. Go to the Bluetooth settings menu
and look for SJF_G15BR1 and select “Pair”
or connect.
(Please note: After pairing do not press any other buttons
while in the pairing menu.)
Camera Mode – Open the camera
application on your device. Push the
button on the Jelly Remote and your device
will take a picture.
Music –
Before using the remote, rst open the
music application on your device.
• : Play and pause music stored on
your device.
• and+:Decrease or increase volume.
• and :Press and hold button
for 4 (or more) seconds and the song will
start over. Press and hold button for
4 seconds and the next song will play.
(Please note: We have tested the remote on both the iPhone
and Galaxy phones. With the large number of phones types
and manufacturers it is hard to know how all functions will
perform. After you have paired the remote, you can try the
phone in different modes to see how the remote will function.)
Sleep Mode – If no buttons are pushed for
5 minutes, remote will enter sleep mode.
Press any the button to wake the remote up.
The logo will blink three times to show
that the remote is trying to establish two-way
communication. After communication is
reestablished it will blink once more. Press the
desired function a second time to complete
the operation. Please wait for communication
to be reestablished; pressing buttons several
times will only delay the process.
Pairing Problems –
1. The Jelly Remote uses two way Bluetooth
communication to talk with your device.
It can only be paired with one device at
a time. If you attempt to pair the Jelly
Remote to more than one device this
could cause a problem.
2. If for some reason you cannot pair the
remote, the rst step is to go to the
setting menu and ask your device to
forget or remove the remote from the list.
3. Press and hold the button for several
seconds until the device appears on the list.
Changing Battery – If the remote no
longer functions properly, the battery has
probably been exhausted. Replace the
battery with a 3V Lithium CR2032. The
“Plus” side should face up.
Caution – Do not use the Bluetooth
remote to wake up your phone. It is
better to wake up your phone before
you use the remote.
Limited Warranty
This Jelly Remote is warranted against defects in materials
and workmanship for a period of one (1) year from the date of
the original retail purchase. If a defect exists, Square Jellysh
will, at its option and to the extent permitted by law, (1) repair
the product at no charge using new or refurbished parts;
or (2) exchange the product with a functionally equivalent
product that is new or refurbished; or (3) refund the original
purchase price.
This warranty excludes damage resulting from abuse,
accident, modications, or other causes that are not defects
in the materials or workmanship. To the extent permitted by
applicable law, the manufacturer is not liable for any direct,
indirect, incidental, or consequential damage arising out of
the use or service of the product, including, but not limited to
damage which may be caused to any electronic device, or
other device utilized in conjunction with the Jelly Remote. To
the extent permitted by applicable law the manufacturer of the
Jelly Remote disclaims all implied and statutory warranties,
including warranties of merchantability and tness for a
particular purpose. If implied warranties cannot be disclaimed,
then such warranties are limited in duration to the duration of
this warranty. This warranty gives you specic legal rights, and
you may have other rights, which vary from state to state.
To obtain warranty service contact Square Jellysh using
the information provided at www.squarejellysh.com. To the
extent permitted by applicable law Square Jellysh will require
proof of purchase for all warranty repairs or replacement.
JeLLy remote
User’s manUaL
Apple/
Android Switch
Battery

Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation