Squareled Lumino 200W LED Fresnel RGBW User manual

SquareLED - Lumino 200W LED Fresnel RGBW

Manual | Lumino 200W LED Fresnel RGBW
Lumino 200W LED Fresnel RGBW
Notice: because the policy of improve the products quality of our company. Maybe some data in the instruc-
tions will change in future. By that time, we won’t inform you about the changed matters.The-One company
reserve the right of changing correlative specication when improve the products. Publisher of the instruction
will not responsible for veracity of information and some correlative results caused by this information.
OVERVIEW
Thank you for using our product, this unit is designed for indoor using, it’s widely used for stage, building,
disco, etc. as high power led eects lighting, this unit can be operated as a single unit or multiple units for
large applications. Direct input of DMX512 signal to unit to allow it controlled by any DMX controller, powerful
internal programs and friendly and convenient operation interface allows customers to program freely to any
dierent lighting project requirements for installation or showing.
This high power par can has gotten the nice sculpt, ecient, save electricity and durable:
This product complies with the following standards:
EN61000-3-2:2006+A2:2009
EN60598-1:2008+A11:2009
Technical Parameter:
• Power Supply: AC 90V-240V, 50/60Hz
• Power Consumption: Max. 260W
• LED: 200W RGBW COB LED
• Features: with Auto Zoom
• LED Life time: over 50,000 hours
• Small volume, lightweight
• High quality optical system
• Beam Angel: 15-50°
• High-quality optical system , Glass reector
• Control Mode: DMX, Auto run and Master/Slave
• DMX Channels: 5/10 CH
• Housing: Aluminum Alloy , Color: Black
• IP Rating: IP20 ,
• Warranty : One year
• N.W.:9.5 kgs
• G.W.: 11.5kgs
• Dimensions : 580x320x320mm

Manual | Lumino 200W LED Fresnel RGBW
1. Product Introduction
1.1. PRODUCT FEATURES
2 kinds of running model
• External control mode (Slave model)
• DMX 512 controller control(2 kinds channel modes)
• Master/salve model control (auto match the signal from controller and the Master light, no need
to set by menu)
• static mode (Master model)
• It can x any color without the controller ,also work this color with strobe
Non-linear dimmer and linear dimmer
• The speed of dimmer can be set under the controller control
Screen Protect
• It will enter blank screen without any operate on the keyboard in 30 seconds . Press any keys then it can quit
screen protection.
Temperature Protection
• It can be set to temperature protection mode
Speed of the Fan
• The fan will start to work when the working temperature reach 40 degree, and the speed will be changed
according to the change of temperature.
Can be Reverse display
1.2. Multi-light working in the same time
When using controller to control multi lights to work in strobe, the controller just send the channel data . The
strobe eect will be depend on each light itself . And please take attention for the follow situation:
1. There will be many situations make the lights are not synchronization in the beginning. (For example: the
dierent time of opening the light , or dierent time of them connect to the controller) .In this case, you can
change value of the controller( for example push 20 to 0, and back to 20), then it can be synchronization.
2. Due to crystal frequency of dierent lights are not the same exactly, so it may not be synchronization after
long time.
3. If need to keep synchronization for long time, there are two ways to do so:
A. Using the controller to edit program make the strobe, auto run eect,then they must be synchronization.
B. Using the Maser/Slave model

Manual | Lumino 200W LED Fresnel RGBW
2. Operation
2.1. Menu Data
Menu State
Main Menu Setting
Operative Mode
Speed of auto running
DMX address
DMX Channle mode
Speed of Dimmer
No DMX signal
Screen Savers
Screen Rotation
Language switching
Speed of Dimmer
Manual mode
System information
Reset
Restore the default settings
2.2. Key Operation
Vice Menu State
Operative Mode DMX Slave: Receive DMX signal from control console or host
Auto run 1
Master: Auto running and send signal to Slave lights
Auto run 2
Auto run 3
Auto run 4
Sound mode
Speed of auto run 0-99 From slow to fast, 99 is the fastest speed
DMX address 1~512 Press“ENTER”to edit state. Adjust ID address by the Key
of Up/Down. Press“ENTER”to ensure again
DMX channel mode
10CH Two kinds of channel modes, 10CH is the default of
system, pls refer to the channel chart for data of each
channel
5 CH
No DMX signal maintain Running by Original state
Clear Stop running

Manual | Lumino 200W LED Fresnel RGBW
Screen Savers
Turn o Backlight always on
blank screen Backlight turn o after idle 10 seconds
DMX address ID address displayed after idle 10 seconds
Screen Rotation Press“ENTER”twice, 180°ip screen display
Language switching Press”ENTER”twice, switch between Chinese and
English
Speed of Dimmer Turn o
Dimmer 1
4 linear dimmer pattern:
1~4 (the fastest and slowest )
Dimmer 2
Dimmer 3
Dimmer 4
Manual mode Press“ENTER”to Manual mode, Not receive control
signals
System information Press“ENTER”to ensure,View the version number and
the elapsed time
Reset Ensure/Cancel
Press“ENTER”to conrmation dialog box, then
press”ENTER”again to reset motor. Press„Cancel“ to
exit the dialog box.
Restore the default settings Ensure/Cancel
Press“ENTER”to conrmation dialog box, then
press”ENTER”again to restore the default settings.Press
„Cancel“ to exit the dialog box.
2.2.1. Language switching
Option State
English/ Chinese Pressed twice in a row„ENTER“ button, switch in English/Chinese
2.2.2. Screen Rotation
Option State
180°ip screen display Pressed twice in a row„ENTER“ button, 180°ip screen display

Manual | Lumino 200W LED Fresnel RGBW
2.2.3. System information
Option State
Software Version NO.(Ver) Displays the current version number of the software
Using of time Displays the total using time information
Total using time Displays the time using of this
2.2.4. Manual mode
Option State
Red
0~255
Press”ENTER”to edit. Change value by press UP/DOWN, press
“ENTER”to ensure .
Green
Blue
White
Zoom function
2.2.5. Special Instructions
At the main menu, press“ENTER”to get in to Reset Calibration Interface, to micro debugging Gobo
location. (Hide feature).
State Operation
Focus Calibration Press”ENTER”to edit, Calibration values can be set by the Key of UP/DOWN. Press
“ENTER”to ensure .

Manual | Lumino 200W LED Fresnel RGBW
2.3. Channel data
2.2.1.Standard channel model (10CH)
Channel Mode Function
10~255 dimmer
20~255 Red
30~255 Green
40~255 Blue
50~255 White
60~10 No strobe
11~255 Speed of strobe (255 is the fastest speed)
7
Macroeciency
0~15 No Function
15~34 Built-in programme 1
35~54 Built-in programme 2
55~74 Built-in programme 3
75~94 Built-in programme 4
95~114 Built-in programme 5
115~134 Built-in programme 6
135~154 Built-in programme 7
155~174 Built-in programme 8
175~194 Built-in programme 9
195~214 Built-in programme 10
215~234 Built-in programme 1-10
235~255 Sound mode
8 0-255 Speed of Macroeciency (channel 7), from slow to fast
9 0-255 Zoom function , from 15-50 degree
10 0-255 Speed of Zoom , 255 is the slowest
2.2.2. Basic channel model (5CH)
Channel Mode data Function
10~255 Red
20~255 Green
30~255 Blue
40~255 White
50~255 Zoom (15-50 degree)

Manual | Lumino 200W LED Fresnel RGBW
SAFETY WARNING
1. Warning
• Every person involved with the installation , operation and maintenance of this device has to be
qualied .
• User must follow the instructions of this manual
• Unqualied person can not open the housing cover and operate the device , or the dealer will
not accept liability for any resulting defects or problems.
• The device against rain and moisture
2. 2. Waring notes
• Power supply : AC 100V-240V , 50/60Hz
• Make sure the power switch is o , the power plug , outlet and the earth connection is in well
condition before connecting the device with the mains.
• Please use qualied power plug and the outlet. Never connect the power cord of this device with
other electrical equipment.
• During move and installation , make sure the device not crashed with metal parts and other
tough materials.
• Always disconnect from the mains, when the device is on the installation and dismantled
• The minimum distance between light-output and the illuminated surface must be more than
50cm
• The device must only be installed on a non-ammable surface . In order to safeguard sucient
ventilation , leave 50cm of free space around the device . Please note that heat-sensitive objects
may be deformed or damaged by the emitted heat .
• During the operation the housing becomes very hot ! Do not operate the device for 15 minutes
after switching o .
• The maximum ambient temperature Ta = 45°C must never be exceeded , The maximum housing
temperatureTb = 80°C must never be exceeded .
• For indoor use
• Replace any visible cracked protective shield , lters and lens .
• The protective shiel, lters and lens will require weekly cleaning as smoke“Cuid tends to buil-
ding up residues , reducing the light“Coutput very quickly.

Manual | Lumino 200W LED Fresnel RGBW
APPENDIX
Problem and solution
Caution:
• Unqualied person involved with installation , operation and maintenance of this device is prohibited .
• If any above mentioned problem happened , or unknown problem happened , please contact manuf-
acturer or distributor for assistance
DISCLAIMER
1. The device is with one year warranty . The warranty period appear non-articial quality problem, this
company is responsible for free maintenance
2. User violate operation caused the machine failure, this is user responsibility.
3. If due to the wrong operation or intense impact caused product destroy even safety accidents, the manuf-
acturer does not undertake any responsibility
4. Prohibit replaced product components by any person, therefore caused any consequences will be whose
responsible
Please contact us freely when you need our related products or in formations...

Manual | Lumino 200W LED Fresnel RGBW
Das Lichttechnikhaus Vertriebs GmbH
Rudolf-Diesel-Str. 3, D-89312 Günzburg
Telefon [phone]
Fax [phone]
E-Mail [e-mail]
Web www.lth-gmbh.de