SR Instruments SRScales SR7000i-KG Service manual

Model SR7000i-KG Wall Mount Platform Scale
Operating and Service Manual
Part No. MAN7000i-KG_MICROBAN_210616 Page 1 of 16
SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150
Tel: [phone] Fax: [phone] URL: www.srscales.com
email: [email protected]m Copyright 2021 SInstruments, Inc.
S
by SInstruments, Inc.
Operating and Service
Manual
Model SR7000i-KG
Wall Mount Platform Scale

Model SR7000i-KG Wall Mount Platform Scale
Operating and Service Manual
Part No. MAN7000i-KG_MICROBAN_210616 Page 2 of 16
SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150
Tel: [phone] Fax: [phone] URL: www.srscales.com
email: [email protected]m Copyright 2021 SInstruments, Inc.
TABLE OF CONTENTS
PACKING CHECKLIST.................................................................................................................3
INSTALLATION..............................................................................................................................3
REPLACEMENT PARTS AND ACCESSORIES ........................................................................5
SYSTEM DESCRIPTION AND INTENDED USE.......................................................................6
MICROBAN ANTIMICROBIAL PROTECTION.......................................................................7
CLEANING AND DISINFECTING...............................................................................................7
STORAGE.........................................................................................................................................8
SPECIFICATIONS...........................................................................................................................8
BUTTON FUNCTIONS...................................................................................................................9
BASIC SYSTEM OPERATION....................................................................................................10
THEORY OF OPERATION .........................................................................................................11
CALIBRATION..............................................................................................................................12
EHR OUTPUT................................................................................................................................14
TROUBLESHOOTING.................................................................................................................14
WARRANTY...................................................................................................................................15
TABLE OF FIGURES
Figure 1: Wall Bracket...................................................................................................................4
Figure 2: Wall Bracket Installation...............................................................................................4
Figure 3: Power Cord Plug In........................................................................................................5
Figure 4: Button Display ................................................................................................................9
Figure 5: Calibration Table .........................................................................................................12
Figure 6: Calibration Switch Diagram .......................................................................................12

Model SR7000i-KG Wall Mount Platform Scale
Operating and Service Manual
Part No. MAN7000i-KG_MICROBAN_210616 Page 3 of 16
SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150
Tel: [phone] Fax: [phone] URL: www.srscales.com
email: [email protected]m Copyright 2021 SInstruments, Inc.
PACKING CHECKLIST
SR7000i-KG Wall Mount Platform Scale
INSTALLATION
STEP 1: Unpack the scale system and check parts against the PACKING CHECKLIST. If there are any
missing or damaged parts, please call the service hotline at 1-800-654-6360.
STEP 2: Determine the best location for the scale by considering these recommendations:
Have 10 feet of free wall / hallway space to roll a wheel chair onto the scale from either side
Platform extends 45” into the hallway when folded down. Hallway must be wide enough to allow
suitable access and egress for personnel using the hallway
A 120vAC power outlet must be within 36” of the power supply on the scale.

DESCRIPTION
QUANTITY
PLATFORM SCALE
1 ea
MOUNTING BRACKET AND HARDWARE PACKET
1 ea
3 FOOT AC POWER SUPPLY CORD
1 ea
CALIBRATION CERTIFICATE
1 ea
WARRANTY CARD
1 ea
MANUAL
1 ea
Continued next page
WARNING
CALIFORNIA PROPOSITION 65: THIS PRODUCT
CONTAINS A CHEMICAL KNOWN TO THE STATE OF
CALIFORNIA TO CAUSE CANCER AND
REPRODUCTIVE OR DEVELOPMENTAL HARM
IMPORTANT
SCALE MUST BE INSTALLED BY
QUALIFIED PERSONNEL
WARNING
DEVICE MUST BE INSTALLED IN
A LOCATION THAT ALLOWS FOR
MEANS OF EGRESS ACCORDING
TO LOCAL, STATE AND
NATIONAL STANDARDS

Model SR7000i-KG Wall Mount Platform Scale
Operating and Service Manual
Part No. MAN7000i-KG_MICROBAN_210616 Page 4 of 16
SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150
Tel: [phone] Fax: [phone] URL: www.srscales.com
email: [email protected]m Copyright 2021 SInstruments, Inc.
INSTALLATION (CON’T)
Figure 1: Wall Bracket
STEP 3: To mount the SR7000i-KG Wall Mount Platform Scale use the Wall Bracket (Figure 1) supplied
with the scale.
STEP 4: When the desired location is determined, use a tape measure and measure up from the floor 41 ½”
and make a mark. This will be the location of top edge of the wall mounting bracket (Figure 2).
NOTE: The wall mounting bracket does not need to be centered on the crossbar, but must be located
between the bumpers
STEP 5: For stud walls, use a stud finder and locate any studs in the mounting area:
•For two (2) studs located within the mounting area (usually 16” on center) align the outer mounting
holes with the studs, level the wall bracket and mark all four screw locations.
•For one (1) stud located within the mounting area align the inner mounting holes with the stud,
level the wall bracket and mark all four screw locations.
•For no studs located within the mounting area, level the wall bracket and mark all four screw
locations.
For concrete walls, level the wall bracket and mark all four screw locations
Figure 2: Wall Bracket Installation
41-1/2” from
floor
Outer Mounting
Holes are 16”
on Center
Inner Mounting
Holes
Continued next page
WARNING
THE WALL BRACKET MUST BE
SECURELY ANCHORED TO THE WALL
USING APPROPRIATE HARDWARE

Model SR7000i-KG Wall Mount Platform Scale
Operating and Service Manual
Part No. MAN7000i-KG_MICROBAN_210616 Page 5 of 16
SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150
Tel: [phone] Fax: [phone] URL: www.srscales.com
email: [email protected]m Copyright 2021 SInstruments, Inc.
INSTALLATION (CON’T)
STEP 6: For stud wall mounting locations without a stud, use a screwdriver to drive the provided self-
drilling wall anchors into the wall. It is not recommended to use a power drill to set the wall anchors.
For concrete wall mounting, install appropriate wall anchors at all marked screw locations.
STEP 7: Mount the bracket to the wall by either using the provided #8 x 1” Phillips flat head screws into
the self-drilling wall anchors or using the customer supplied appropriate flat head screws long enough to
anchor into the wall or the concrete anchors.
NOTE: The screws need to be a flat head type screw so there is adequate clearance for the scale frame to
slide into the wall bracket.
STEP 8: After the bracket is securely fastened to the wall, have two people lift the SR7000i-KG Series
scale and place it into the wall mounting bracket.
STEP 9: Carefully lower the SR7000i-KG Series platform down into position for use and plug the
provided AC power cord into the power supply located inside the bracket at the right end of the upper
support bar and into a wall outlet (Figure 3).
REPLACEMENT PARTS and ACCESSORIES
Figure 3: Power Cord Plug In
Part #
Description
FRME20A0903F01
Medical Grade AC Power Supply
FRPCORD3
3 Foot Ultra Low Profile Angled Power Cord
FRPCORD6
6 Foot Ultra Low Profile Angled Power Cord
IMPORTANT
THE WALL BRACKET IS INTENDED TO KEEP THE SCALE
FROM PULLING OFF OF THE WALL. ENSURE THAT THE
ENTIRE WEIGHT OF THE SCALE IS ON THE FLOOR AND
NOT ON THE WALL BRACKET.
WARNING
THE COUNTER BALANCE
ACTUATORS ASSIST THE END USER
WHEN RAISING OR LOWERING THE
PLATFORM. THE END USER NEEDS
TO CONTROL THE RAISING AND
LOWERING OF THE PLATFORM.

Model SR7000i-KG Wall Mount Platform Scale
Operating and Service Manual
Part No. MAN7000i-KG_MICROBAN_210616 Page 6 of 16
SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150
Tel: [phone] Fax: [phone] URL: www.srscales.com
email: [email protected]m Copyright 2021 SInstruments, Inc.
SYSTEM DESCRIPTION and INTENDED USE
SYSTEM DESCRIPTION
The SR7000i-KG Wall Mount Platform Scale system employs the latest in microprocessor and load cell
technology to provide accurate and repeatable weight data. Four (4) identically matched transducers are
strategically placed to ensure an accurate representation of the patient’s weight.
The SR7000i-KG low power microprocessor circuitry is powered by a Medical Grade AC power supply.
The patient’s weight is displayed on a 16-character dot matrix LCD w/LED backlight. The weight data will
be viewed in kilograms with a displayed resolution of 0.1.
The SR7000i-KG Wall Mount Platform Scale system has a 61 cm x 101.6 cm (24” x 40”) platform
weighing surface.
The scale system has a programmable Automatic Power Down (APD) for adjusting scale on-time.
INTENDED USE:
The SR7000i-KG Wall Mount Platform Scale system is specifically designed for weighing ambulatory and
non-ambulatory wheelchair bound patients and is a preferred means of gathering patient weight data of up
to 454 kilograms.
Platform should be stored in the upright position when not in use to prevent a trip and fall hazard.
WARNING
PATIENTS EXPERIENCING DIFFICULTY
WALKING OR SEEING SHOULD BE
ASSISTED WHEN USING THE
PLATFORM SCALE
WARNING
DEVICE COULD BE A TRIP AND
FALL HAZARD IF PLATFORM IS
LEFT IN THE DOWN POSITION
WARNING
DO NOT EXCEED
MAXIMUM WEIGHT LIMIT OF
454 KG

Model SR7000i-KG Wall Mount Platform Scale
Operating and Service Manual
Part No. MAN7000i-KG_MICROBAN_210616 Page 7 of 16
SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150
Tel: [phone] Fax: [phone] URL: www.srscales.com
email: [email protected]m Copyright 2021 SInstruments, Inc.
MICROBAN ANTIMICROBIAL PROTECTION
Microban® antimicrobial technology has been added to help reduce the growth of bacteria as part of a
medical center's approach to creating a cleaner healthcare environment. For more information, visit
https://www.microban.com/sr-scales
CLEANING and DISINFECTING
CLEANING
To clean the display / user interface and other scale contact areas:
Use a soft cloth dampened with water and mild detergent to clean scale surfaces.
Wipe surface with clean soft cloth dampened with water and then dry with clean soft cloth.
Do not use abrasive materials to clean scale surface to prevent damage to the surface
finish.
Do not spray liquid directly onto scale surfaces. Use only a damp cloth.
DISINFECTION
To disinfect the display / user interface and other scale contact areas:
Use a soft cloth dampened with disinfectant or a damp disposable disinfectant cloth. Cloth
cannot be dripping wet. Follow manufacturer’s instruction on the proper use of
commercially available disinfectants.
Disinfectant solutions with 1% sodium hypochlorite or 70% isopropyl alcohol are suitable
for display / user interface and other scale contact surfaces.
After disinfecting, use a soft cloth dampened with clean water and dry with a soft clean
cloth to prevent buildup of material on scale finish.
Do not use abrasive material to disinfect / clean scale surfaces to prevent damage to the
surface finish.
Do not spray liquid directly onto scale surfaces. Use only a damp cloth.
WARNING: DO NOT SPRAY CLEANING SOLUTION OR LIQUIDS DIRECTLY
ON SURFACES TO BE CLEANED
WARNING: EXPOSURE TO EXCESSIVE LIQUID WILL DAMAGE USER
INTERFACE KEYPAD
WARNING: DO NOT USE PRESSURIZED WATER OR STEAM. THE SCALE
SYSTEM CONTAINS ELECTRONIC COMPONENTS THAT MAY BE
ADVERSELY AFFECTED BY EXPOSURE TO SUCH AN
ENVIRONMENT.

Model SR7000i-KG Wall Mount Platform Scale
Operating and Service Manual
Part No. MAN7000i-KG_MICROBAN_210616 Page 8 of 16
SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150
Tel: [phone] Fax: [phone] URL: www.srscales.com
email: [email protected]m Copyright 2021 SInstruments, Inc.
STORAGE
Platform should be stored in the upright position when not in use to prevent a trip and fall hazard.
If storing this equipment for periods longer than three (3) months, store in the upright position to prevent
damage to the hydraulic cylinders. To maintain proper operation of this instrumentation, storage and
transport conditions should not vary outside the following conditions: Relative Humidity 0% to 85%,
Ambient Temperature -10C to +50C (14F to 122F).
SPECIFICATIONS
MAXIMUM WEIGHT CAPACITY
454 kg
PLATFORM SIZE
61 cm x 101.6 cm (24 in x 40 in)
DISPLAY TYPE
16-Character Dot-Matrix LCD
DISPLAY RESOLUTION
0.1 kg
ACCURACY
0.1% +/- 1 digit of displayed resolution for calibrated range
AUTO ZERO
Auto Zero when platform is first put down. One button
operation after platform is left down
AUTO POWER DOWN
Adjustable between 30 to 300 seconds
AVERAGING
Automatic digital filter
POWER SUPPLY
Medical Grade AC Power Supply
CALIBRATION
Calibration is traceable to NIST standards
OPERATING CONDITIONS
Normal operating conditions for this product:
Ambient Temperature Range: 20C to 30C (68F to 85F)
Relative Humidity Range: 0%-85%
Avoid exposure to high-pressure water or steam
TRANSPORTATION and
STORAGE
Platform should be stored in the upright position when not in
use to prevent a trip and fall hazard.
Storage and transportation conditions should not vary outside
the following conditions: Relative Humidity 0% to 85%,
Ambient Temperature -10C to +50C (14F to 122F).
Store in the upright position if storing longer than three (3)
months

Model SR7000i-KG Wall Mount Platform Scale
Operating and Service Manual
Part No. MAN7000i-KG_MICROBAN_210616 Page 9 of 16
SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150
Tel: [phone] Fax: [phone] URL: www.srscales.com
email: [email protected]m Copyright 2021 SInstruments, Inc.
BUTTON FUNCTIONS
WEIGH Press and hold to zero scale. Button is used to zero the system before placing the patient on the
scale. Ensure that nothing is in contact with the weighing surface during this procedure.
SEND (EHR)
Press to send stored weight value to EHR.. If BMI was calculated, BMI and height will be
included in the output values.
RECALL
Press to recall the last stored weight. The stored weight will be erased when the scale is zero or
another stable weight is stored.
BMI
Press to calculate BMI. When the “BMI” is pressed, the default value “HT = 165 cm” is
displayed. If there is no stored stable weight, the display will indicate “NO WEIGHT DATA”
and then go back to the weigh screen “WT = 0.0 kg”.
MENU Press Menu to toggle through the menu options.
Setting ON TIME: Use UP or DOWN arrow buttons to adjust the “ON TIME”. The “ON
TIME” may be set from 30 to 300 seconds in 30 second increments. Press ENTER to save
changes.
Setting TIME and DATE: Use the UP arrow button to select digit. To change digit use the
DOWN arrow button. Press ENTER to save changes.
NOTE: When selected, the year position defaults to “00”
Setting AUTOiSEND: Use UP or DOWN arrow buttons to select between “ON” and OFF”.
Once weight has stabilized, AUTOiSEND will automatically export weight value to EHR.
Figure 4: Button Display
Continued next page

Model SR7000i-KG Wall Mount Platform Scale
Operating and Service Manual
Part No. MAN7000i-KG_MICROBAN_210616 Page 10 of 16
SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150
Tel: [phone] Fax: [phone] URL: www.srscales.com
email: [email protected]m Copyright 2021 SInstruments, Inc.
BUTTON FUNCTIONS (CON’T)
ENTER Press to save change in digits for calibration, for unit’s set-up, for time and date set-up and
saving completed calibration data.
UP / SELECT
Press UP to adjust height up from the default for BMI calculation, to increase the scale’s “on
time”, or to select a digit when setting time and date.
DOWN / CHANGE
Press DOWN to adjust the height down from the default for BMI calculation, to decrease the
scale’s “on time”, or to change the value of a selected digit when setting time and date.
BASIC SYSTEM OPERATION
SETTING SYSTEM ZERO
Scale will auto-zero when the platform is first lowered. Make sure the scale is free and clear of any
obstructions. When platform is left down, press and hold the ZERO / WEIGH button. The displayed
message will indicate “HOLD TO ZERO”and count down to zero. Release the button when
display message indicates “HANDS OFF”. Make sure that nothing is in contact with the scale while
zeroing the system. In a few seconds, the display will read “WT = 0.0 kg.
WEIGHING
Position the patient on the scale. The weight stable indicator “” flashes on the display. When the
weight is stable, the weight stable indicator remains solid. The display will indicate the patient’s
weight in kilograms; example: “WT = 123.5 kg”. The stable weight is auto stored in memory.
RECALLING LAST STORED WEIGHT
Press to recall last stored weight. The stored weight will be erased when the scale is zero or
another stable weight is stored.