Srhythm X10 User manual

User Manual
Manuale diIstruzioni
Manual de instrucciones
Manuel d'Utilisation
Bedienungsanleitung
取扱説明爾
X10
1-13
English
14-26
Deutsch
27-39
Français
40-52
Italiana
53-65
Espanol
66-78
日本語

User Manual
4.For your safety,please do not turn the volume too
high while running outside to ensure that you can
hear sound in your surroundings.
3.Please do not listen for a long time at high
volume to avoid hearing damage.
1.Please do not use headphone while driving and
charging.
2.Please use cautiously and stop using headphone
in dangerous situation.
1.Use original or certified cables for charging and
voltage within 6.3V.Power will be cut off and start
protection mode when the voltage exceed 6.3V and
within 36V.Headphone will be broken when the
voltage over 36V.
2.Keep away from children to avoid danger from
improper use.
5.Do not use corrosive cleaner/oil to clean
headphone
6.Turn off headphone Bluetooth and ANC function
to save power when you do not use headphone.
3.Avoid dropping headphone and operating in the
extreme temperature. Please use headphone within
operation temperature range: -15 °C (5 F) – 55°
C(131 F).
4.Do not submerge headphone in the water.
Safety instructions
Hearing safety:
Operation Safety:
English
English
1 2

What's in the Box
X10 Headphone *1
Micro USB Charging Cable *1
Audio Cable *1
Volume Down/Next Song
Multi-function Button
Volume Up/Previous Song
ANC Button
Charging Port
Microphones
AUX Port
At a Glance
English
English
3 4
Bluetooth/ANC LED
indicator light

What's in the Box
X10 Headphone *1
Micro USB Charging Cable *1
Audio Cable *1
Volume Down/Next Song
Multi-function Button
Volume Up/Previous Song
ANC Button
Charging Port
Microphones
AUX Port
At a Glance
English
English
3 4
Bluetooth/ANC LED
indicator light

Use ANC Function
How to Use
Press the ANC Button to turn Active Noise
Cancellation ON/OFF
(the LED indicator light will be green when ANC
ON.)
Use Bluetooth Function
3.Hold the Multi-function Button for 3-5
seconds to turn headphone Bluetooth off.
1.Hold the Multi-function Button for 3-5
seconds to turn headphone Bluetooth on,then
enter pairing mode.(the LED indicator light will
be blue and red flashing quickly.)
2.Start your mobile phone Bluetooth and find
headphone Bluetooth pairing name "X10" to
click it to pair.(the LED indicator light will be
blue flashing slowly after pairing successfully.)
Press to adjust volume. Long press to
skip to next/previous song.
Function Details
Easy Paring
pairing mode.(the LED indicator light will be blue and
red flashing quickly.)
3. Turn on your mobile phone Bluetooth. Search for
headphone Bluetooth signal on mobile phone and
click “X10” to pair.(the LED indicator light will be
blue flashing slowly after pairing successfully.)
2. Keep headphone and your mobile phone as close
as possible during pairing process.
1. Hold the Multi-function Button for 3-5 seconds to
turn headphone Bluetooth on,then enter
4. If you are asked for a password/PIN code during
pairing procedure,please enter "0000" (four zeros).
Pair to the Second Bluetooth Device
1. Please make sure that headphone is connected to
the first Bluetooth device successfully and music is
not playing.
2. Hold the Multi-function button until the
headphone switch off and continue with the steps
"Easy Pairing"(Let the headphone re-enter pairing
mode,the LED indicator light will flash blue and red
alternately).
3. Pair headphone with the second device according
to "Easy Pairing" steps.
4. Return to the first Bluetooth device and pair it with
headphone again. Now both of your devices are
paired with headphone.
Double-press the Multi-function Button
to reject an incoming call.
Press the Multi-function Button to
play/pause music or answer/end call.
2
English
English
5 6
3-5S
1
Press the multi-function button three times to
activate voice dialing function
3

Use ANC Function
How to Use
Press the ANC Button to turn Active Noise
Cancellation ON/OFF
(the LED indicator light will be green when ANC
ON.)
Use Bluetooth Function
3.Hold the Multi-function Button for 3-5
seconds to turn headphone Bluetooth off.
1.Hold the Multi-function Button for 3-5
seconds to turn headphone Bluetooth on,then
enter pairing mode.(the LED indicator light will
be blue and red flashing quickly.)
2.Start your mobile phone Bluetooth and find
headphone Bluetooth pairing name "X10" to
click it to pair.(the LED indicator light will be
blue flashing slowly after pairing successfully.)
Press to adjust volume. Long press to
skip to next/previous song.
Function Details
Easy Paring
pairing mode.(the LED indicator light will be blue and
red flashing quickly.)
3. Turn on your mobile phone Bluetooth. Search for
headphone Bluetooth signal on mobile phone and
click “X10” to pair.(the LED indicator light will be
blue flashing slowly after pairing successfully.)
2. Keep headphone and your mobile phone as close
as possible during pairing process.
1. Hold the Multi-function Button for 3-5 seconds to
turn headphone Bluetooth on,then enter
4. If you are asked for a password/PIN code during
pairing procedure,please enter "0000" (four zeros).
Pair to the Second Bluetooth Device
1. Please make sure that headphone is connected to
the first Bluetooth device successfully and music is
not playing.
2. Hold the Multi-function button until the
headphone switch off and continue with the steps
"Easy Pairing"(Let the headphone re-enter pairing
mode,the LED indicator light will flash blue and red
alternately).
3. Pair headphone with the second device according
to "Easy Pairing" steps.
4. Return to the first Bluetooth device and pair it with
headphone again. Now both of your devices are
paired with headphone.
Double-press the Multi-function Button
to reject an incoming call.
Press the Multi-function Button to
play/pause music or answer/end call.
2
English
English
5 6
3-5S
1
Press the multi-function button three times to
activate voice dialing function
3

Active Noise Canceling(ANC) ON/OFF
To turn on ANC, press the ANC Button;
To turn off ANC, press the ANC Button;
(the LED indicator light green color will be off when
ANC OFF.)
(the LED indicator light will be green when ANC ON.)
Wired Mode
ANC also works in wired mode.Microphones only
works in Bluetooth mode,not for wired mode.
Headphone support AUX input for wired external
audio source connection. Simply turn headphone
Bluetooth off and plug in the audio cable.For any
ANC Bluetooth headphone,it is still need battery
power support for wired mode.
Please note that CAN NOT adjust volume on
headphones in wired mode
Voice Dialing
Press the multi-function button three times to
activate voice dialing function(compatible with
iPhone Siri and selected Android voice dialing
software).
How to Wear
Folding to be portable Adjustable Headband
English
English
7 8

Active Noise Canceling(ANC) ON/OFF
To turn on ANC, press the ANC Button;
To turn off ANC, press the ANC Button;
(the LED indicator light green color will be off when
ANC OFF.)
(the LED indicator light will be green when ANC ON.)
Wired Mode
ANC also works in wired mode.Microphones only
works in Bluetooth mode,not for wired mode.
Headphone support AUX input for wired external
audio source connection. Simply turn headphone
Bluetooth off and plug in the audio cable.For any
ANC Bluetooth headphone,it is still need battery
power support for wired mode.
Please note that CAN NOT adjust volume on
headphones in wired mode
Voice Dialing
Press the multi-function button three times to
activate voice dialing function(compatible with
iPhone Siri and selected Android voice dialing
software).
How to Wear
Folding to be portable Adjustable Headband
English
English
7 8

Headphone Specification
LED Indicator Light
Pairing: Blue and red lights flash alternately
Paired: Blue light flashes
Playing:Blue light slowly flashes
Charging: Red light turns on
Full Charge: Red light turns off
Battery Low: Red light turns on with voice prompt
ANC ON: Green light turns on
ANC OFF: Green light turns off
Bluetooth OFF: Blue and red lights turn off
Technical Specification
•Battery capacity: 400mAh
•Net weight: 228g •Impedance: 32 Ω
•Waterproof rating: IPX4
•Driver diameter: Φ40mm
•Product name: Xrhythm X10
•Input: 5V-12V •Chip: ATS
•Charging time: 2.5hours
•Use time: 12-16 hours
•Bluetooth version: V5.0
•Bluetooth profile: A2DP, AVRCP, HSP, HFP
•Bluetooth range: 10m/33ft
•Frequency response: 20Hz–20KHz
* Please kindly note that perhaps sometimes these
LED indicator light color will be mixed to become
other colors(pink,purple,etc.) occasionally.
English
English
9 10

Headphone Specification
LED Indicator Light
Pairing: Blue and red lights flash alternately
Paired: Blue light flashes
Playing:Blue light slowly flashes
Charging: Red light turns on
Full Charge: Red light turns off
Battery Low: Red light turns on with voice prompt
ANC ON: Green light turns on
ANC OFF: Green light turns off
Bluetooth OFF: Blue and red lights turn off
Technical Specification
•Battery capacity: 400mAh
•Net weight: 228g •Impedance: 32 Ω
•Waterproof rating: IPX4
•Driver diameter: Φ40mm
•Product name: Xrhythm X10
•Input: 5V-12V •Chip: ATS
•Charging time: 2.5hours
•Use time: 12-16 hours
•Bluetooth version: V5.0
•Bluetooth profile: A2DP, AVRCP, HSP, HFP
•Bluetooth range: 10m/33ft
•Frequency response: 20Hz–20KHz
* Please kindly note that perhaps sometimes these
LED indicator light color will be mixed to become
other colors(pink,purple,etc.) occasionally.
English
English
9 10

Delete Pairing: Hold both "Volume Up" and
"Volume Down" buttons simutaneously for 5
seconds
If any issues, here tips for you:1. Full charge your
headphone(don't use fast charger)2. Reset
headphone by inserting audio cable into
headphone audio socket then removing it. Or the
upgraded X10 headphones would be reset
automatically when charging.
Charging
Start your mobile phone Bluetooth and find
headphone Bluetooth pairing name X10 to click it to
pair.(the LED indicator light will be blue flashing
slowly after pairing successfully.)
Use the included micro USB charging cable to connect
to headphone Charging Port. Connect the other end
of charging cable to a computer USB port or USB wall
charger under 6.3V voltage.Turn off headphone
Bluetooth and ANC function before charging.Please
don't use headphone while charging.The LED
indicator light will be off or blue color when full of
charge basing on headphone turn off status.
Hold the Multi-function Button for 3-5 seconds to
turn headphone Bluetooth off.
Q&A
6. Q: Why can't I hear any sound from my computer or
mobile phone?
3. Q: Can I replace battery in the headphone?
1. Q: Why can't headphone pair with my mobile phone?
A: For your safety,we strongly recommend that you do not
use headphone while driving to avoid distraction.
4. Q: Can I use headphone while driving?
A: Please check if your headphone is in pairing mode or re-
connection mode,check if Bluetoothsearch function of your
Bluetooth device is turned on,if all done,then go to Bluetooth
menu of your Bluetooth device,delete/ignore the headphone
Bluetooth pairing name X10.After that,you can try to
reconnect Bluetooth according to above “Easy Pairing”
steps.
A: Please double check the battery status of your headphone.
compatible with some APPs.
A: No,you can not.Headphone uses a built-in non-detachable
Li-Polymer battery that can't be replaced.
A: Please check if there are any metal materials or obstacles
within a relatively close range or your surroundings that
perhaps interfering with Bluetooth connection.This may
happen becauseBluetooth is a radio technology which is
sensitive to objects between headphone and other devices.
2. Q: Why can't headphone turn on?
A: Due to configurations of different application
software,headphone may not be completely
5. Q: Why does headphone sometimes disconnects with
Bluetooth device within 10 meters?
A: Please check if output channel of your computer supports
A2DP profile.Also check the volume settings on your
headphone and computer/mobile phone.
7. Q: Why am I unable to use headphone to control the
volume of a track playing on an APP on my mobile phone?
English
English
11 12

Delete Pairing: Hold both "Volume Up" and
"Volume Down" buttons simutaneously for 5
seconds
If any issues, here tips for you:1. Full charge your
headphone(don't use fast charger)2. Reset
headphone by inserting audio cable into
headphone audio socket then removing it. Or the
upgraded X10 headphones would be reset
automatically when charging.
Charging
Start your mobile phone Bluetooth and find
headphone Bluetooth pairing name X10 to click it to
pair.(the LED indicator light will be blue flashing
slowly after pairing successfully.)
Use the included micro USB charging cable to connect
to headphone Charging Port. Connect the other end
of charging cable to a computer USB port or USB wall
charger under 6.3V voltage.Turn off headphone
Bluetooth and ANC function before charging.Please
don't use headphone while charging.The LED
indicator light will be off or blue color when full of
charge basing on headphone turn off status.
Hold the Multi-function Button for 3-5 seconds to
turn headphone Bluetooth off.
Q&A
6. Q: Why can't I hear any sound from my computer or
mobile phone?
3. Q: Can I replace battery in the headphone?
1. Q: Why can't headphone pair with my mobile phone?
A: For your safety,we strongly recommend that you do not
use headphone while driving to avoid distraction.
4. Q: Can I use headphone while driving?
A: Please check if your headphone is in pairing mode or re-
connection mode,check if Bluetoothsearch function of your
Bluetooth device is turned on,if all done,then go to Bluetooth
menu of your Bluetooth device,delete/ignore the headphone
Bluetooth pairing name X10.After that,you can try to
reconnect Bluetooth according to above “Easy Pairing”
steps.
A: Please double check the battery status of your headphone.
compatible with some APPs.
A: No,you can not.Headphone uses a built-in non-detachable
Li-Polymer battery that can't be replaced.
A: Please check if there are any metal materials or obstacles
within a relatively close range or your surroundings that
perhaps interfering with Bluetooth connection.This may
happen becauseBluetooth is a radio technology which is
sensitive to objects between headphone and other devices.
2. Q: Why can't headphone turn on?
A: Due to configurations of different application
software,headphone may not be completely
5. Q: Why does headphone sometimes disconnects with
Bluetooth device within 10 meters?
A: Please check if output channel of your computer supports
A2DP profile.Also check the volume settings on your
headphone and computer/mobile phone.
7. Q: Why am I unable to use headphone to control the
volume of a track playing on an APP on my mobile phone?
English
English
11 12

9. Q: Why does Bluetooth turn off when I connect an
audio cable?
A: Some customers have mentioned poor audio quality
on Windows PC.Please note that there are “Headset”
and “Headphone” modes you can toggle by changing
your output device.Selecting “Headphone Mode” will
drastically improve the audio quality.”Headset Mode”
is designed for highly compressed VOIP calls,etc.That’s
not the fault of headphone product,that’s just the
limitation of that protocol.If you are in “Headphone
Mode”,the audio quality is fantastic.
10. Q: Why can't I turn headphone on/off?
8. Q: What do I do if Bluetooth can not close or open?
11. Q: Why does audio quality become poor on
Windows PC?
A: Please reset Bluetooth function of headphone by
inserting an audio cable into headphone
audio port,then removing it.Before re-connecting,kindly
remember to delete/ignore headphone bluetooth
pairing name X10 on your mobile phone.
A: This is one of our special features. When users insert
an audio cable into headphone audio port, all Bluetooth
feature buttons stop working and Bluetooth turns off.
But,Bluetooth will be available again when audio cable is
moved.
A: Please note that ANC and Bluetooth are indicated by
the same LED indicator light(but different light color),
with a green light for ANC and a blue light for Bluetooth.
If you need to turn Bluetooth on/off,you can turn off ANC
firstly in case that you make confused by the color
lights.But you will be very familiar with the light color
meaning after using few times because it is simple and
easy.
Bedienungsanleitung
English
Deutsch
13 14