
5. How do I deactivate the locking function?
Pull the release cable, or lift the lock piece and hold it while tightening the set
screw (see figure)
6. How do I activate the Manual Lock?
Unscrew the set screw with 2 mm hex key
7. How does the selectable lock settings work?
Break off the small stop in the center of the release handle
User can select between default of positions of the lock
IMPORTANT: Make sure the user understands the
difference between the two settings and how to operate
the handle
8. How do you adjust the Balance Knee Control?
All adjustments are made with a 4 mm hex key
Adjustment order is important
a) Brake sensitivity adjustments
Verify the activation of the stance brake
b) Extension assist setting
Right turn: Increase extension assist
Left turn: Decrease extension assist
c) Brake play adjustments
Clockwise: Play is reduced. Only small adjustment is
required. Tighten until a slight resistance is felt.
Over tightening will cause excessive swing friction
Counterclockwise: Brake pre-tension is reduced
Brake sensitivity adjustments