
Components - Panels
Please check you have all the panels listed below
1
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
Seat
1
• Check you have all the
components and tools listed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
to its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Dispose of all packaging
carefully and responsibly.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
Care and maintenance
If you have damaged or missing components,
Legs x 4
2
If
you
need
any
help
or
have
damaged
or
missing
parts,
email
techstyle.spar
[email protected]Techstyle Spares, Stadium North, Tofts Farm Industrial Estate, Brenda Road, Hartlepool, TS25 2DH
Assembly Instructions
Step 1
Assembly
a: Screw one leg 2into
each of the four corners
of seat 1in a clockwise
direction as shown.
Assembly is complete.
1
a:
2
2 2
2