StarTech.com SLSODDU33B User manual

DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 01/16/2015
For the most up-to-date information, please visit: www.startech.com
Quick Install Guide
Packaging Contents
• 1 x USB 3.0 to slimline SATA ODD enclosure
• 1 x USB 3.0 cable
• 1 x Quick start guide
System Requirements
• Computer system with available USB port
• 12.5mm Slimline SATA optical disc drive (ODD) (e.g. Blu-ray-RW,
DVD-RW, etc.)
SLSODDU33B
USB 3.0 to Slimline SATA Optical drive Enclosure
*actual product may vary from photos
Tool Requirements
• 1 x Phillips head screw driver
Installation
WARNING! ODD drives, media and enclosures require careful
handling, especially when being transported. If you are not careful
with your equipment damage may result. Always handle your hard
devices with caution. Be sure that you are properly grounded by
wearing an anti-static strap when handling computer components
or discharge yourself of any static electricity build-up by touching a
large grounded metal surface (such as the computer case) for several
seconds.
1. Using a Phillip’s head screw driver, remove the two ODD bay
access screws, from the back of the enclosure releasing the plastic
bezel.
2. Remove the plastic bezel and slide the drive tray from the front of
the enclosure.
3. Slide your slimline ODD into the drive tray from the front,
ensuring the SATA plug on your ODD is in line with the SATA
reciprocal on the back of the tray.
4. Ensure your ODD is rmly seated, then use your Phillip’s head
screw driver with the provided screws to secure the drive to the
tray using the mounting points on the side of the drive and tray.
5. Slide the assembled drive tray back into the enclosure housing.
6. Replace the plastic rear bezel and fasten using the previously
removed ODD bay access screws.
7. Using the included USB 3.0 cable, connect the enclosure to
an available USB port on the host computer system. No driver
software will install automatically once the operating system is
launched.
Product Overview
Front View
Rear View
ODD bay
USB 3.0
Micro B port
ODD bay
access screw
ODD bay
access screw

FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the
equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and
access our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a one year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be
returned for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages
arising from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not
allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.