StarTech.com 5G7AIBS-USB-HUB-NA User manual

Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: April 18, 2022 2:42 PM
Product ID
5G7AIBS-USB-HUB-NA
7-Port USB 3.2 Gen 1 (5Gbps) Hub with On/O Port Switches
4
1
5
Requirements
• Computer
• USB-C or USB-A Port
For the latest drivers, manuals, product information, technical specications, and
declarations of conformance, please visit: www.StarTech.com/5G7AIBS-USB-HUB-NA
Package Contents
• USB Hub x 1
• 3.3 ft. [1 m] USB-C to USB-B Host Cable x 1
• 3.3 ft. [1 m] USB-A to USB-B Host Cable x 1
• Universal Power Adapter (North America) x 1
• Quick-Start Guide x 1
2
3
Component Function
17x USB-A Data/Charge
Ports
• Connect to USB-A Peripherals
• USB 3.2 Gen 1 (5 Gbps)
• Supports BC 1.2 5 V/1.5 A (7.5 W)
Charging
27x USB Port Host
Connection LEDs
• Indicates if the Corresponding USB-A
Data/Charge Port is connected to the
Computer
• Solid Blue - Connected
• O - Not Connected
37x USB Port On/O
Switches
• Activates/Deactivates the
Corresponding USB-A Data/Charge
Port
4USB-B Host Port
• Connect to a USB-C or USB-A Port on
a Host Computer
• USB 3.2 Gen 1 (5 Gbps)
5DC 20V Port
• Connect the USB Hub to a Power
Source, using the Universal Power
Adapter
Product Diagram

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-
party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the
property of their respective holders.
Warranty Information
This product is backed by a 2-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of
business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com
Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands
Regulatory Compliance
FCC - Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void
the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
Installation
1. Connect up to seven USB peripherals to the USB-A Data/Charge Ports located
on the USB Hub.
2. Connect the Universal Power Adapter from an AC outlet, to the DC 20V Port on
the USB Hub.
Note: Without power being provided to the USB Hub via the Universal Power
Adapter, the USB Hub will not operate in any capacity.
3. Use the USB-C to USB-B Host Cable or USB-A to USB-B Host Cable, to connect a
USB port on the Computer to the USB-B Host Port, located on the USB Hub.
• The Computer will automatically detect the device and install the required
drivers for the USB Hub.
• Only one Host Cable is required, depending upon which Port Type is available
on the Computer. The other Host Cable can be stored for future use.
Operation
USB Port Power Switches
Each USB-A Data/Charge Port on the USB Hub, features a corresponding USB
Port Power Switch adjacent to it.
To Activate a USB-A Data/Charge Port
• Press the corresponding USB Port On/O Switch into the ON position.
• The USB peripheral that’s connected to the USB-A Data/Charge Port will
receive power, and the Computer will automatically detect the USB peripheral.
• The corresponding USB Port Host Connection LED will turn on solid blue.
Note: The USB-A Data/Charge Port will still provide power to the USB peripheral,
even when the USB Hub is not connected to a Computer, provided the USB
Port On/O Switch is set into the ON position. However, the USB Hub must be
connected to a computer in order for the USB Port Host Connection LED to tun on.
To Deactivate a USB-A Data/Charge Port
• Press the corresponding USB Port On/O Switch into the OFF position.
• The USB peripheral that’s connected to the USB-A Data/Charge Port will
no longer receive power, and the Computer will no longer detect the USB
peripheral.
• The corresponding USB Port Host Connection LED will turn o.