StarTech.com SV211HDUA User manual

Manual Revision: 05/14/2013
For the most up-to-date information, please visit: www.startech.com
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
SV211HDUA / SV211DPUA
2 Port USB HDMI®/DisplayPort® Cable KVM Switch
with Audio and Remote Switch – USB Powered
*actual product may vary from photos

Instruction Manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use ofTrademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.

Instruction Manual
1
Table of Contents
Introduction............................................................................................2
Packaging Contents ................................................................................................................................. 2
System Requirements.............................................................................................................................. 2
Installation ..............................................................................................2
Operation ................................................................................................5
Hotkey Quick Reference Guide ............................................................................................................ 6
Specications..........................................................................................8
Technical Support ..................................................................................9
Warranty Information............................................................................9

Instruction Manual
2
Introduction
Packaging Contents
• 1 x KVM Switch
• 1 x Software CD
• 1 x Instruction Manual
System Requirements
• Available video output - HDMI (SV211HDUA) or DisplayPort (SV211DPUA),
USB and 3.5mm Audio/Microphone connections (if HDMI/DisplayPort audio is not
being used)
• Monitor, speaker/microphone and USB keyboard/mouse peripheral set
Installation
1. Before connecting the KVM Switch, insert the included installation CD into each
computer’s CD/DVD drive.
2. If AutoPlay runs, choose the option to browse/open the folder. Otherwise you can
access the les on the CD by going into My Computer, double-click the CD/DVD
drive and run Autorun.exe.

Instruction Manual
3
3. Click the appropriate software installation option for your system, and available
ports (“2-Port KVM”- Mac or Windows), and you will be prompted to click Next
several times to complete the installation.
4. Once the installation is complete, a new system tray icon will display (Windows),
or a new Application (Mac OS) with the following indicators.

Instruction Manual
4
5. Connect your HDMI / DisplayPort Monitor, keyboard, mouse and speakers to
the available ports on the KVM Switch.
6. Connect the attached KVM and audio cables to Computer 1.
7. Perform the same connections to Computer 2.
SV211HDUA
SV211DPUA
HDMI
USB
3.5 mm Mini-Jack
HDMI USBUSB
USBUSB DisplayPort USB
DisplayPort
3.5 mm
Mini-Jack

Instruction Manual
5
Operation
There are three methods to control your KVM Switch for computer and Audio/Mic
port selection:
1. QuickSwitch Button - A wired remote control for direct switching control. Simply
press the button to toggle between the two computers.
2. KVM Switching Software (Windows & Mac platform) – See “Quick Reference Sheet”
below for details.
3. Keyboard hotkeys – For Windows, the computer toggle key combination is “Scroll
Lock + Scroll Lock”. For Mac, please refer to Dene Hotkey Preceding Sequence in
the Quick Reference Sheet.
Note: Each keystroke hotkey sequence should be pressed within two seconds,
otherwise, the hotkey sequence may not be validated.
Windows Mac
Operation Menu Settings Page Operation Menu Preferences Page

Instruction Manual
6
Command Switcher Software Description
Select PC Port
Right-click the KVM Switching icon
to evoke the operation menu, then
select whichever computer that is
available for switching.
Select the active PC port
Previous PC
port
Right-click the KVM Switching icon
to evoke the operation menu, then
select whichever computer that is
available for switching.
Select the previous
connected PC port
Next PC port
Right-click the KVM Switching icon
to evoke the operation menu, then
select whichever computer that is
available for switching.
Select the next
connected PC port
Dene Hotkey
Preceding
Sequence
Right-click the KVM Switching
icon to evoke the operation menu,
then select Settings (Windows) /
Conguration Dialog Box (Mac OS).
User–denable hotkeys
sequence for computer
selection is “Ctrl +Alt+
[command key]”.
For Mac, instead of Scroll
Lock key, you may use
User-denable hotkey
sequence to switch.
Autoscan
Right-click the KVM Switching icon
to evoke the operation menu, then
select Start Auto-Scan to activate
autoscanning.
Autoscan through every
connected port for quick
screen browsing of each
port (default scan delay
time = 10 second)
Autoscan with
Programmable
Delay Time
Right-click the KVM Switching icon
to evoke the operation menu, then
select a range of Auto-Scan Period.
Autoscan with a user-
dened delay time
within a range of 10 ~ 60
seconds
Stop Autoscan
While autoscanning, right-click the
KVM Switching icon to evoke the
operation menu, and then select
Stop Auto-Scan to de-activate
autoscanning.
Terminate Autoscan
activity
Hotkey Quick Reference Guide

Instruction Manual
7
Beeper
Right-click the KVM Switching icon
to evoke the operation menu, then
check the box “Turn on Buzzer”.
Beeper will be functional
between operations of
KVM switch
Keep in Dock
(Mac only)
Right-click the KVM Switching icon
to evoke the operation menu, and
then select “Keep in Dock”.
KVM switching icon will
be on the system tray of
your desktop
Open at Login
(Mac only)
Right-click the KVM Switching icon
to evoke the operation menu, then
select “Open at login”.
Operate Switcher
Software and login
Fix Audio Port
Right-click the KVM Switching icon
to evoke the operation menu, then
check the box “Fix Audio Port at
PC” and select the desired PC port.
Check this option and
then select the computer
to x the audio/mic port
to the selected computer.
Once this option is
checked, the audio/mic
port will be xed and
become non-switchable.

Instruction Manual
8
Specications
SV211DPUA SV211HDUA
Console Connectors
1 x DisplayPort (20 pin)
Female
2 x USB A (4 pin) Female
2 x 3.5mm Mini-Jack (3
Position) Female
1 x HDMI (19 pin) Female
2 x USB A (4 pin) Female
2 x 3.5mm Mini-Jack (3
Position) Female
Computer
Connectors
(per port)
1 x DisplayPort (20 pin)
Male
1 x USB 2.0 A (4 pin) Male
2 x 3.5mm Mini-Jack (3
Position) Male
1 x HDMI (19 pin) Male
1 x USB 2.0 A (4 pin) Male
2 x 3.5mm Mini-Jack (3
Position) Male
LEDs 2 x PC Selection Indicator
Switching Modes Pushbutton, Hot-key, Software
Maximum Resolution 2560 x 1600 1080p (1920x1200)
Audio Support 3.5mm and HDMI audio 3.5mm and DisplayPort audio
On Screen Display No
Cascadable No
Rack-Mountable No
Enclosure Type Plastic
Operating
Temperature 0°C to 40°C (32°F to 104°F)
Storage Temperature -20°C to 60°C (4°F to 140°F)
Humidity 0~90% RH Non-Condensing
Cable Length 0.85 m (Attached KVM Cable) / 1.4 m (Remote Switch)
Dimensions (LxWxH) 88 x 60 x 25mm
Weight 400g