StarTech.com VS221HD2VGA User manual

Manual Revision: 10/17/2014
For the most up-to-date information, please visit: www.startech.com
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
VS221HD2VGA
VGA+HDMI® to VGA Audio/Video Converter
Switch
*actual product may vary from photos

Instruction Manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.

Instruction Manual
i
Table of Contents
Product Diagram ....................................................................................1
Front View .................................................................................................................................................... 1
Rear View...................................................................................................................................................... 1
Introduction............................................................................................2
Packaging Contents ................................................................................................................................. 2
System Requirements.............................................................................................................................. 2
Hardware Installation............................................................................2
Mode Selection and Switch Operation...............................................3
Manual Mode.............................................................................................................................................. 3
Priority Mode.............................................................................................................................................. 3
Automatic Mode........................................................................................................................................ 3
Technical Support ..................................................................................4
Warranty Information............................................................................4

Instruction Manual
1
Product Diagram
Front View
1. Input Selection Button
2. HDMI Audio/Video Input#1 Port
3. Active Port LED Indicators
4. 3.5mm Audio Input#2 Port
5. VGA Input #2 Port
6. EDID Selection
Rear View
1. Power Adapter Port
2. VGA Video Output Port
3. 3.5mm Audio Output Port
4. Mode Selection Switch
6

Instruction Manual
2
Introduction
Packaging Contents
• VGA+HDMI to VGA Converter Switch (VS221HD2VGA)
• Mounting Bracket Set
• Universal Power Adapter (NA/EU/UK)
• Instruction Manual
Note: The VS221HD2VGA will not display digitally encrypted
content from your HDMI-enabled Video Source Device.
System Requirements
• HDMI-enabled Source Device w/ HDMI Cable (i.e. computer)
• VGA-enabled Source Device w/ VGA Cable (i.e. computer)
• VGA-enabled Display Device w/ VGA Cable (i.e. monitor, projector)
• 2x 3.5mm audio cable (Optional for audio support)
Hardware Installation
1. Using an HDMI cable (not included), connect your HDMI-enabled Video Source
Device to the HDMI Audio/Video Input#1 Port on the VS221HD2VGA.
2. Using a VGA cable (not included), connect your VGA-enabled Video Source Device
to the VGA Audio/Video Input#2 Port on the VS221HD2VGA.
3. (Optional) If your VGA-enabled Video Source Device includes an audio output,
connect the audio source output on the device to the 3.5mm Audio Input#2 Port
on the VS221HD2VGA using a 3.5mm Audio Cable (not included).
4. Using a VGA cable (not included), connect your VGA-enabled Display Device to the
VS221HD2VGA.
5. (Optional) If your VGA-enabled Display Device supports audio, connect a 3.5mm
audio cable (not included) from the VS221HD2VGA to the Audio input port on your
Display Device.
Note: You can alternatively use a separate audio output device such as PC speakers,
or a Home Theatre system.
6. Using the included Power Adapter, connect the Power Adapter Port on the
VS221HD2VGA to an available power outlet.
7. Turn on the VGA-enabled Display Device, followed by each of the HDMI & VGA-
enabled Video Source Devices (HDMI/VGA).

Instruction Manual
3
Mode Selection and Switch Operation
Change the Mode Selection Switch to choose your desired operation mode.
Instructions and descriptions for each Operation mode are listed below:
Manual Mode
Manual Mode enables you to switch between video sources with push button operation.
1. Set the Mode Selection Switch to “Manual Switch” to place the VS221HD2VGA into
Manual Mode.
2. Press the Input Selection Button to toggle between each Video Source Device. The
Active Port LED Indicator will light as video sources are switched, indicating which
port is selected.
Priority Mode
Priority Mode enables you to select a prioritized Video Input Device that
will automatically be selected should that device be turned on.
1. Set the Mode Selection Switch to “HDMI Priority” or “VGA Priority” to Place the
VS221HD2VGA into your choice Video Source Device priority.
2. Your HDMI or VGA Video Source Device (depending on your selection), will now
automatically be displayed on your VGA-enabled Video Display Device while it is
turned on. Turning o the device will automatically switch to the remaining device.
Set EDID Conguration
The VS221HD2VGA supports EDID pass-through, EDID copy and EDID emulation.
EDID is a communication structure used by your video display device to communicate
available display settings to your video source devices ensuring optimal performance.
You can set your desired EDID mode using the EDID dial on the side of the
VS221HD2VGA.

Instruction Manual
4
EDID Pass-Through
Using EDID pass-through, the video source devices will communicate EDID settings to your
video display device as normal. This conguration is ideal if your video display is capable of
maintaining EDID communication. Follow the below steps to set up EDID pass-through.
1. Using a small at-headed screw driver (not included), set the EDID dial to position 0
EDID Copy
Using EDID copy, the VS221HD2VGA will save the EDID settings of your video display locally
and communicate these settings to your video source devices. This conguration is ideal if
your video source devices and your video display intermittently experience issues due to
EDID communication, such as signal loss. Follow the steps below to set up EDID copy.
1. Using a small at-headed screw driver (not included), set the EDID dial to position 1.
2. Press and hold the input selection button, until the active port LED ashes green
(about 3 seconds).
The active port LED will now alternate between green and red, and return to normal
indicating that EDID Copy is now active.
Factory Default Setting
If the VS221HD2VGA is encountering an operational problem, resetting the device back to
factory default settings may resolve your issue. Please follow the below steps to restore the
VS221HD2VGA to factory default settings.
1. Using a small at-headed screw driver (not included), set the EDID Selector to Position 1.
2. Press and hold the input selection button until the active port LED ashes RED
(about 6 seconds).
The active port LED will now alternate between green and red, and return to normal
indicating that the device has now been reset to factory default settings.
EDID Emulation
Using EDID emulation the VS221HD2VGA will communicate general EDID settings for your
desired resolution. This conguration is ideal if your video display device does not support
EDID. Follow the steps below to set up EDID emulation.
1. Review the “Complete Available EDID Settings Table” to determine your EDID dial position
based on the resolution of your video source devices.
2. Using a small at-headed screw driver (not included), set the EDID dial to your desired
position.

Instruction Manual
5
Complete Available EDID Settings Table
EDID Dial Position Resolution Settings
0 EDID Pass-Through
1 EDID Copy
2 1024 x 768
3 1280 x 720
4 1280 x 1024
5 1366 x 768
6 1440 x 900
7 1600 x 900
8 1600 x 1200
9 1660 x 1050
A 1920 x 1080
B 1920 x 1200
C Not Active
D 2048 x 1152
E Not Active
F Not Active

Instruction Manual
6
Specications
Video Input Signals 1 x HDMI
1 x VGA
Video Output Signals 1 x VGA
Maximum Video Resolution 1920x1200 (WUXGA)
Audio Support 7.1 Digital Audio (HDMI)
3.5mm Stereo Audio (VGA)
Supported Switch Modes Priority, Manual

Instruction Manual
7
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase.
During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
ocers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.