StarTech.com IES81GPOEW User manual

Manual Revision: 11/13/2018
For the latest information, technical specications, and support for
this product, please visit www.StarTech.com/IES81GPOEW.
FR: Guide de l’utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l’uso - it.startech.com
JP: 取扱説明書 - jp.startech.com
IES81GPOEW
8-Port Gigabit Ethernet Switch
(4-Port PoE+) - Managed
*actual product may vary from photos

Instruction manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Changes or modications not expressly approved by StarTech.com could void the user’s
authority to operate the equipment.
Industry Canada Statement
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [A] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (A)/NMB-3(A)
Use of Trademarks, Registered Trademarks, and other Protected Names and
Symbols
This manual may make reference to trademarks, registered trademarks, and other protected
names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do
not represent an endorsement of a product or service by StarTech.com, or an endorsement
of the product(s) to which this manual applies by the third-party company in question.
Regardless of any direct acknowledgement elsewhere in the body of this document,
StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks,
and other protected names and/or symbols contained in this manual and related documents
are the property of their respective holders.

Instruction manual
i
Table of Contents
Product Diagram ....................................................................................1
Front View.................................................................................................................................................... 1
Back View ..................................................................................................................................................... 1
Package Contents ..................................................................................................................................... 2
Requirements ............................................................................................................................................. 2
About the LED Indicators......................................................................3
Wire the Power Inputs ...........................................................................5
Reboot the Network Switch..................................................................5
Reset to the Default Factory Settings .................................................5
Installation ..............................................................................................6
Install the Network Switch onto a Wall.............................................................................................. 6
Install the Switch onto a Magnetic Surface ..................................................................................... 7
Mount the Switch onto a DIN Rail....................................................................................................... 8
About the Web-Based GUI ....................................................................9
Accessing the Web-Based GUI.............................................................................................................. 9
Web-Based GUI Operation....................................................................10
Navigation Menu....................................................................................................................................... 10
Port Status Panel ....................................................................................................................................... 10
Operational Buttons................................................................................................................................. 10
Navigation Menu....................................................................................................................................... 11
Home Page .................................................................................................................................................. 11
Accessing the Conguration Manager.............................................................................................. 11
Applying Changes and Setting the Current Conguration ....................................................... 11
System Menu ..........................................................................................12

Instruction Manual
ii
Editing System Parameters.................................................................................................................... 13
Viewing System Information................................................................................................................. 13
IP Congurations....................................................................................13
Apply Changes and Set IP Address Settings ................................................................................... 14
Viewing IP Address Settings.................................................................................................................. 14
Applying Changes and Setting IPv6 Address Settings................................................................ 15
Viewing IPv6 Settings.............................................................................................................................. 15
User Conguration.................................................................................16
Adding a New User................................................................................................................................... 16
Viewing Existing User Proles (Local User) ...................................................................................... 16
Deleting a User Account......................................................................................................................... 17
Adjusting System Time Settings.......................................................................................................... 17
Viewing System Time Information...................................................................................................... 18
Adjusting SNTP Server Settings........................................................................................................... 19
Viewing SNTP Server Information....................................................................................................... 19
Log Management...................................................................................20
Enabling/Disabling the Logging Service.......................................................................................... 20
Viewing Logging Service Status .......................................................................................................... 21
Creating/Editing a Log............................................................................................................................ 21
Deleting a Log............................................................................................................................................ 21
Remote Syslog ........................................................................................22
Sending a Message to Syslog ............................................................................................................... 22
Deleting a Syslog Message.................................................................................................................... 22
Viewing the Syslog Page ....................................................................................................................... 23
Clearing/Refreshing the Syslog Page ................................................................................................ 24
SNMP Management ...............................................................................24
Enabling/Disabling SNMP...................................................................................................................... 25
Viewing SNMP Information................................................................................................................... 25

Instruction Manual
iii
Adding an SNMP Entry............................................................................................................................ 25
Viewing an SNMP Table Status............................................................................................................. 26
Deleting an SNMP Entry ......................................................................................................................... 26
SNMP Access Group...............................................................................27
Adding an SNMP Access Group .......................................................................................................... 27
Deleting an SNMP Access Group......................................................................................................... 27
Viewing Access Group Status ............................................................................................................... 28
SNMP Community..................................................................................28
Adding SNMP Community Settings................................................................................................... 28
Viewing SNMP Community Settings.................................................................................................. 29
Deleting SNMP Community Settings................................................................................................. 29
SNMP User...............................................................................................29
Viewing an SNMP User............................................................................................................................ 30
Deleting an SNMP User........................................................................................................................... 30
SNMPv1, 2 Notication Recipients......................................................30
Adding SNMPv1 and 2 Notication Recipients.............................................................................. 31
Viewing SNMPv1 and 2 Notication Recipients.............................................................................32
Deleting SNMPv1 and 2 Notication Recipients ........................................................................... 32
Adding a New SNMPv3 Host Entry ..................................................................................................... 32
Viewing SNMPv3 Notication Recipients......................................................................................... 33
Deleting SNMPv3 Notication Recipients........................................................................................ 33
SNMP Engine ID......................................................................................................................................... 33
Applying Changes to the SNMP Engine ID..................................................................................... 33
Viewing SNMP Engine ID Status.......................................................................................................... 33
Adding an SNMP Remote Engine ID .................................................................................................. 34
Viewing SNMP Remote Engine ID Status......................................................................................... 34
Deleting an SNMP Remote Engine ID................................................................................................ 34
Port Management ..................................................................................34

Instruction Manual
iv
Adding Port Conguration .................................................................................................................... 34
Viewing a Port's Status............................................................................................................................ 35
Editing a Ports Description.................................................................................................................... 36
Port Counters ............................................................................................................................................. 36
Viewing Port Counters ............................................................................................................................ 36
Viewing Port Fiber Status....................................................................................................................... 39
Viewing SFP Module Detail Status...................................................................................................... 40
Bandwidth Utilization ...........................................................................40
Viewing Port Utilization .......................................................................................................................... 40
Port Mirroring............................................................................................................................................. 41
Applying Changes to Port Mirroring Settings ................................................................................ 42
Viewing Port Mirroring Status .............................................................................................................. 42
Applying Changes to Jumbo Frame Settings ................................................................................. 42
Viewing Jumbo Frame Size Setting.................................................................................................... 42
Dening a Recovery Interval for Potential Errors...........................................................................43
Viewing Port Error Disabled Settings................................................................................................. 43
Port Error Disabled.................................................................................................................................... 44
Viewing Port Error Status ....................................................................................................................... 44
Protected Ports .......................................................................................................................................... 44
Viewing Protected Ports Status............................................................................................................ 45
Energy Ecient Ethernet (EEE)............................................................................................................. 45
Enabling/Disabling EEE Port Settings................................................................................................ 46
Viewing EEE Port Status .......................................................................................................................... 46
Link Aggregation....................................................................................................................................... 46
Applying LAG Settings ............................................................................................................................ 48
Viewing LAG Setting................................................................................................................................ 48
Applying LAG Management Settings................................................................................................ 48
Viewing LAG Management Information........................................................................................... 48
Editing LAG Management Settings.................................................................................................... 49
Conguring LAG Port Setting............................................................................................................... 49

Instruction Manual
v
Viewing LAG Port Status......................................................................................................................... 50
Conguring LACP System Priority Settings ..................................................................................... 50
Conguring LACP Port Setting............................................................................................................. 50
Viewing LACP Port Information ........................................................................................................... 51
Viewing LAG Status .................................................................................................................................. 51
Viewing LACP Information..................................................................................................................... 51
VLAN.........................................................................................................52
Re-Assigning a VLAN ID. ......................................................................................................................... 56
Viewing the Status of the Management VLAN ID.......................................................................... 56
Creating a VLAN......................................................................................................................................... 57
Viewing a VLAN.......................................................................................................................................... 57
Editing a VLAN............................................................................................................................................ 57
Viewing Port VLAN Status ...................................................................................................................... 60
Port to VLAN................................................................................................................................................ 60
Adding a Port Member to a VLAN....................................................................................................... 60
Editing a Port Member from a VLAN .................................................................................................. 61
Protocol VLAN Group Setting ............................................................................................................... 61
Viewing the Status of a VLAN Group.................................................................................................. 62
Deleting a VLAN Group........................................................................................................................... 62
Mapping a Group to a VLAN Port ....................................................................................................... 62
Viewing a Protocol VLAN Port State ................................................................................................... 62
Deleting a Protocol VLAN Port ............................................................................................................. 63
GVRP Setting...........................................................................................63
Applying GVRP Global Settings ........................................................................................................... 63
Viewing GVRP Settings............................................................................................................................ 64
Applying GVRP Port Setting.................................................................................................................. 64
Viewing GVRP Port Status ...................................................................................................................... 65
Viewing GVRP VLAN Status.................................................................................................................... 65
Clearing/Refreshing the GVRP Port Statistics Page ...................................................................... 65
Clearing/Refreshing the GVRP Port Error Statistics Page........................................................... 66

Instruction Manual
vi
Spanning Tree Protocol........................................................................................................................... 67
STP Global Settings .................................................................................................................................. 71
Applying Changes to STP Global Settings ....................................................................................... 72
Viewing STP Information....................................................................................................................... 72
Applying Changes to STP Port Setting.............................................................................................. 73
Viewing STP Port Status ......................................................................................................................... 75
Applying Changes to CIST Instance Information Settings......................................................... 75
Viewing CIST Instance Information .................................................................................................... 76
Applying Changes to CIST Port Setting ............................................................................................ 76
Viewing CIST Port Status........................................................................................................................ 76
Applying Changes to MST Instance Conguration ......................................................................77
Viewing MST Instance Setting Information..................................................................................... 77
MST Port Setting ....................................................................................78
Applying Changes to MST Port Conguration.............................................................................. 78
Viewing MST Port Status......................................................................................................................... 79
STP Statistics...........................................................................................79
Viewing STP Statistics.............................................................................................................................. 79
Multicast..................................................................................................80
Applying Changes to Properties Settings........................................................................................ 80
Viewing Properties Information........................................................................................................... 80
IGMP Snooping.......................................................................................80
Viewing IGMP Snooping Information................................................................................................ 81
Viewing IGMP Snooping Table............................................................................................................. 81
Editing IGMP Snooping Table Settings.............................................................................................. 83
IGMP Querier ..........................................................................................83
Applying Changes to IGMP Querier Settings.................................................................................. 83
Viewing IGMP Querier Status ............................................................................................................... 83
IGMP Static Group..................................................................................84

Instruction Manual
vii
Adding an IGMP Static Group:.............................................................................................................. 84
Adding Additional Ports to an IGMP Static Group........................................................................ 84
Viewing IGMP Static Group Information........................................................................................... 84
Editing IGMP Static Group Information ............................................................................................ 84
Viewing IGMP Group Table Information........................................................................................... 85
IGMP Router ...........................................................................................85
Adding a Router Port ............................................................................................................................... 85
Adding Additional Ports to a Router Port......................................................................................... 85
Viewing Router Port Status.................................................................................................................... 86
Editing/Deleting Router Ports .............................................................................................................. 86
Viewing the Dynamic Router Table .................................................................................................... 86
Viewing the Static Router Table .......................................................................................................... 86
Viewing the Forbidden Router Table ................................................................................................. 86
Applying an IGMP Forward All............................................................................................................. 86
Clearing/Refreshing IGMP Snooping Statistics .............................................................................. 87
MLD Snooping........................................................................................88
Applying Changes to MLD Snooping................................................................................................ 88
Viewing MLD Snooping Information................................................................................................. 88
Clearing/Refreshing MLD Snooping Statics .................................................................................... 89
Multicast Throttling Settings................................................................................................................. 89
Making Changes to the Max Groups and Action Settings: ........................................................ 90
Viewing IGMP Port Max. Groups Information................................................................................. 90
Multicast Filter............................................................................................................................................ 90
Quality of Service ...................................................................................................................................... 91
Security....................................................................................................92
RADIUS Server ....................................................................................................................... 93
Conguring Use Default Parameters ................................................................................................. 93
Adding a New Radius Server................................................................................................................. 94
Editing/Deleting a Login Authentication List ................................................................................. 95

Instruction Manual
viii
Conguring TACACS+ Server Session Parameters ........................................................................ 96
Adding a New TACACS+ Server............................................................................................................ 96
Editing/Deleting a TACACS+ Server Authentication List ............................................................ 96
AAA...........................................................................................................97
Conguring AAA on the Managed Switch: ..................................................................................... 98
DHCP Snooping......................................................................................98
Applying DHCP Snooping Setting...................................................................................................... 100
Viewing DHCP Snooping Informations............................................................................................. 100
DHCP Snooping VLAN Setting ............................................................................................................. 101
Applying DHCP Snooping VLAN Setting .......................................................................................... 101
Viewing DHCP Snooping VLAN Setting ............................................................................................ 101
Port Setting ................................................................................................................................................. 102
Applying DHCP Snooping Port Settings........................................................................................... 102
Viewing DHCP Snooping Port Settings............................................................................................. 102
Clearing DHCP Snooping Statistics Page ...........................................103
Database Agent ......................................................................................................................................... 103
Conguring DHCP Snooping Database............................................................................................ 104
Viewing DHCP Snooping Database Information........................................................................... 104
Conguring DHCP Snooping Rate Limit Settings ......................................................................... 104
Viewing DHCP Rate Limit Settings...................................................................................................... 105
Option82 Global Setting.......................................................................105
Viewing Option82 Global Settings ..................................................................................................... 106
Option82 Port Settings ........................................................................................................................... 106
Conguring Option82 Port Settings .................................................................................................. 106
Viewing Option82 Port Setting ............................................................................................................ 106
Conguring Option82 Circuit-ID Settings........................................................................................ 107
Viewing Conguring Option82 Port Circuit-ID Settings ............................................................. 107
Dynamic ARP Inspection.......................................................................107

Instruction Manual
ix
Conguring Dynamic ARP Inspection Settings ............................................................................. 107
Viewing DAI Informations...................................................................................................................... 108
Conguring Dynamic VLAN Settings................................................................................................. 108
Viewing DAI VLAN Setting ..................................................................................................................... 108
Conguring DAI Port Settings: ............................................................................................................. 108
Viewing DAI Port Setting........................................................................................................................ 109
Clearing/Refreshing the Dynamic ARP Inspection Statistics .................................................... 109
Conguring ARP Rate Limit Setting ................................................................................................... 110
Viewing ARP Rate Limit Cong ............................................................................................................ 110
IP Source Guard ......................................................................................................................................... 110
Conguring IP Source Guard Port Settings ..................................................................................... 111
Viewing IP Source Guard Port Information...................................................................................... 111
Adding an IP Source Guard Static Binding Entry........................................................................... 112
Viewing IP Source Binding Table Status............................................................................................ 112
Deleting an IP Source Guard Static Binding Entry ........................................................................ 112
Port Security ...........................................................................................112
Applying Port Security ........................................................................................................................... 113
Viewing Port Security Status................................................................................................................. 114
DoS ...........................................................................................................114
Viewing DoS Information....................................................................................................................... 115
Applying STP Port Settings ................................................................................................................... 117
Viewing DoS Port Status......................................................................................................................... 117
Storm Control .........................................................................................117
Applying Storm Control Settings........................................................................................................ 117
Viewing Storm Control Global Information..................................................................................... 117
Applying Storm Control Port Settings............................................................................................... 118
Viewing Storm Control Information................................................................................................... 118
ACL............................................................................................................119
Adding an MAC-Based ACL List ........................................................................................................... 120

Instruction Manual
x
Deleting an ACL List................................................................................................................................. 120
Adding MAC Based ACE.......................................................................................................................... 120
Viewing MAC-Based ACE ..................................................................................................................... 121
Editing/Deleting a MAC based ACL Entry ........................................................................................ 122
Adding an IPv4 Based ACL List............................................................................................................. 122
Viewing IPv4 Based ACL Table.............................................................................................................. 122
Deleting an IPv4 Based ACL List .......................................................................................................... 122
Viewing the IPv4 Based ACE Table ...................................................................................................... 126
Editing/Deleting an IPv4 ACE Table.................................................................................................... 127
Naming an IPv6 Based ACL List............................................................................................................ 127
Deleting an IPv6 Based ACL List .......................................................................................................... 127
Adding an IPv6 - Based ACE List .......................................................................................................... 127
Editing/Deleting an IPv4 ACE Table.................................................................................................... 130
Binding an ACL List to a Port................................................................................................................. 131
MAC Address Table ................................................................................131
Conguring a Static MAC Setting........................................................................................................ 132
Viewing Static MAC Status..................................................................................................................... 132
Deleting Static MAC Settings................................................................................................................ 132
MAC Filtering Setting............................................................................................................................... 132
Adding a New MAC Filtering Setting................................................................................................. 132
Viewing Static MAC Status..................................................................................................................... 132
Applying a Dynamic Address Setting................................................................................................ 133
Viewing Dynamic Address Status........................................................................................................ 133
Editing/Viewing/Clearing the Dynamic MAC Table...................................................................... 133
LLDP .........................................................................................................134
Applying LLDP Global Settings............................................................................................................ 134
Applying LLDP Port Conguration ..................................................................................................... 136
Applying LLDP TLV Selection................................................................................................................ 136
Viewing LLDP Port Status....................................................................................................................... 137
Viewing Local Device Summary .......................................................................................................... 137

Instruction Manual
xi
MED Network Policy ..............................................................................139
Setting the LLDP MED Policy for Voice Application ..................................................................... 139
Applying Network Policy Conguration........................................................................................... 139
Viewing LLDP MED Network Policy Table ........................................................................................ 140
Deleting an LLDP MED Network Policy Table Entry...................................................................... 140
Applying Port LLDP MED Conguration........................................................................................... 141
Viewing LLDP MED Port Setting Table............................................................................................... 141
Applying MED Location Conguration............................................................................................. 142
Viewing LLDP MED Port Location Table............................................................................................ 142
Viewing the LLDP Port Overloading Table....................................................................................... 142
Clearing or Refreshing LLDP Global Statistics ................................................................................ 143
Viewing LLDP Port Statistics.................................................................................................................. 144
Diagnostics..............................................................................................145
Running a Copper Cable Test................................................................................................................ 145
Ping ................................................................................................................................................................ 146
Transmitting ICMP Packets .................................................................................................................... 146
IPv6 Ping Test.............................................................................................................................................. 146
Transmitting ICMPv6 Packets ............................................................................................................... 146
Trace Router ................................................................................................................................................ 147
Applying Trace Route Settings ............................................................................................................. 147
RMON .......................................................................................................148
Clearing RMON Statistics........................................................................................................................ 148
Creating a New Index or Modifying an Existing Index RMON Event...................................... 149
Viewing RMON Event Information...................................................................................................... 150
Deleting an RMON Event Entry............................................................................................................ 150
Viewing the RMON Event Log Table................................................................................................... 150
Creaitng a New RMON Alarm or Modifying an Existing RMON Alarm................................... 151
Viewing RMON Alarm Information..................................................................................................... 152
Deleting an RMON Alarm Entry ........................................................................................................... 153
Creaitng a New RMON History or Modifying an Existing RMON History.............................. 153

Instruction Manual
xii
Viewing RMON History............................................................................................................................ 153
Deleting an RMON History Entry......................................................................................................... 154
Applying the RMON History Index......................................................................................................154
Power over Ethernet ..............................................................................154
System Conguration.............................................................................................................................. 154
Power over Ethernet Conguration.................................................................................................... 155
PoE Conguration.................................................................................................................................... 155
Making Changes to the Power over Ethernet Conguration.................................................... 155
Making Changes to Power Allocation ............................................................................................... 156
Power over Ethernet Status................................................................................................................... 157
PoE Schedule ..........................................................................................157
Scheduled Power Recycling.................................................................................................................. 157
PoE Alive Check Conguration............................................................158
Applying Alive Check Conguration.................................................................................................. 158
Viewing changes to the PD Alive-Check .......................................................................................... 159
Maintenance ...........................................................................................160
Reboot Switch.........................................................................................160
Rebooting the Switch.............................................................................................................................. 161
Backup Manager ....................................................................................161
Backing up an Image ............................................................................................................................... 161
Upgrade Manager ..................................................................................162
Upgrading or reloading a Firmware Image ..................................................................................... 162
Dual Image ..............................................................................................163
Applying an Image ................................................................................................................................... 163
Viewing Dual Image Information........................................................................................................ 163
Technical support...................................................................................164

Instruction Manual
xiii
Warranty information............................................................................164

Instruction manual
1
Product Diagram
Front View
Mounting Hole
Link/
Activity
LEDs
3-pin
Terminal
Block
DC Power
Input
RJ45 Ports 1 - 4
RJ45 Ports 5 to 8
Mounting Hole
Mounting Hole
Mounting Hole
Power LED
Back View
Reset button
SFP link and
activity LEDs
SFP ports
(dust covers installed)

Instruction manual
2
Package Contents
• 1 x network switch
• 1 x terminal block connector
• 4 x screw anchors
• 4 x screws
• 4 x attaching pins
• 4 x locking pins
• 4 x washers
• 4 x magnets
• 1 x DIN rail
• 3 x DIN-rail screws
• 8 x RJ45 dust caps
• 1 x quick-start guide
Requirements
• Ethernet port connection
• RJ45 network cables
This network switch is OS independent and doesn’t require any additional drivers
or software.
Requirements are subject to change. For the latest requirements, please visit
www.StarTech.com/IES81GPOEW.

Instruction manual
3
About the LED Indicators
This network switch features a Link and Activity LED Indicator for each of the
eight RJ45 ports. There is also a Power LED located above the 3-Pin Terminal
Block, and a PoE Power Usage LED that illuminates in 30 watt increments.
For more information about what the LED indicators signify, see the table below.
LED Behavior Signicance
RJ45 Ports 1 - 8
Solid Green Link was successfully
established
Blinking Green Connected device is
transferring data
Solid Green Connected device is transferring
data at 1000Mbps
O Link is down or connected
device is transferring data at
10/100Mbps
Power LED indicator Solid Green Switch is receiving power
SFP LED indicator Solid Green Connected device is transferring
data at 1000Mbps
Flashing Green Connected device is
transferring data
Solid Orange Link is down or connected
device is transferring data at
100Mbps
Flashing Orange Connected device is
transferring data

Instruction manual
4
Wire the Power Inputs
You can use either an external power adapter or the terminal block to power the
network switch. Alternatively, you can connect both an external power adapter
and the terminal block to create a redundant power input.
Note: You should use wire ranging in size of 12 to 24 AWG.
Caution! Make sure that you ground the enclosure before you install the terminal
block connector into the network switch.
1. Insert the grounding wire into the Ground port on the terminal block, and
tighten the wire clamp screws.
2. Insert the positive DC power wire into the V+ port on the terminal block
connector, and tighten the wire clamp screws.
3. Insert the negative DC power wire into the V- port on the terminal block
connector, and tighten the wire clamp screws.
4. Insert the terminal block connector into the 3-pin terminal block on the
network switch.
Reboot the Network Switch
The Reset button on the network switch is designed to reboot the network
switch without turning the power on/o. To reboot the network switch, press the
Reset button.
Reset to the Default Factory Settings
You can use the Reset button to reset the network switch to the following default
factory settings:
Default user name: admin
Default password: admin
Default IP address: 192.168.0.100
Subnet mask: 255.255.255.0
Default gateway: 192.168.0.254
• To reset to the default factory settings, press and hold the Reset button for
more than 5 seconds. The Port LED Indicators will illuminate. When the LEDs
are no longer illuminated, the reset sequence is complete.

Instruction manual
5
Installation
Install the Network Switch onto a Wall
The mounting holes on the network switch are 8 mm in diameter, and the
distance between the two holes is 133 mm.
1. Hold the network switch against the wall in the area that you want to install
it, and use a pencil to trace the location of the four Mounting Holes onto the
wall.
2. Use the Mounting Holes that you traced on the wall as a template and drill
holes in the wall.
3. Insert the four Screw Anchors into the holes.
Note: Make sure that the Screw Anchors are ush against the wall.
4. Place the network switch against the wall and insert the four screws through
the Mounting Holes on the switch and into the Screw Anchors. (Figure 1)
5. Tighten the Screws.
Screw
Screw anchor
Mounting hole
Figure 1
*actual product may vary from illustration