Startech.com St121hdbtd User manual

Micro-USB port

for power

Quick start guide

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision: 02/01/2016

For the latest information, technical specications, and support for

this product, please visit www.startech.com/ST121HDBTD

Packaging contents

• 1 x HDMI transmitter

• 1 x USB cable for power

• 1 x quick start guide

System requirements

• HDMI enabled video source, such as a computer or Blu-ray™ player

• HDBase-T™ display or an HDBaseT receiver with an HDMI display

• CAT5e or CAT6 cabling with enough length to reach from your

video source to the location of your display

ST121HDBTD

Compact HDMI® over CAT5 Transmitter - 70m

*actualproductmayvaryfromphotos

Preparing your site

1. Setup your local HDMI enabled video source in your desired

location.

2. If you’re connecting to an HDBase-T display, setup the display

appropriately in your desired location.

If your connecting to an HDBase-T receiver with an HDMI

display, setup the display appropriately in your desired location

and connect your HDBaseT receiver to the display, as per the

documentation included with your HDBaseT receiver.

Notes: Please ensure that the transmitter is situated near an

available USB power source. Make sure all devices are turned o

before you begin the installation.

Product overview

Front view

Rear view

HDMI

input

RJ-45

output

About this product

HDBaseT is a standardized, zero-latency video distribution

technology that’s revolutionizing HDMI distribution. HDBaseT uses

an advanced method of modulation that enables you to distribute

uncompressed HDMI audio and video over standard network

cabling. This transmitter turns your HDMI signal into an HDBaseT

signal, enabling you to extend your source signal to an HDBaseT

display or receiver up to 70 m away.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the

equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)

to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all

trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and

access our comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two year warranty.

StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for

repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,

consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not

allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Hardware installation

1. Position the transmitter near the video source.