StarVedia IC201 User manual

Mini Full HD
IP Camera
Plug&Play H.264 wireless IP cameras
View on iPhone/iPad and Android
The IP Camera is a Full HD (two mega-pixel) camera designed for all day video
surveillance on your iPhone/iPad andAndroid mobiles/pads. The setup is truly 1-2-3 :
1. Connect the camera to the network
2. Download the app mCamView into your iPhone/iPad or Android
3. View video by the camera ID/password
The push notification is supported, so that you will get the notification from your
iPhone/iPad and Android once there is any events detected through the motion
detection or sound detector on the camera, even when your mobile is on sleep mode.

The SD card recording is supported, and you could playback the recorded video
on your iPhone/iPad and Android. You could also do the SD card recording only when
there is motion or sound detection to save the SD card storage size. The motion and
sound detected recording has a 5 seconds pre-recording, so that you will always catch
the critical moment.
The Time Lapse Recording is supported. The camera can do time lapse recording
on the SD card and you can playback the recorded time lapse video on the mobile or
tablet remotely, anywhere. This is more convenient than traditional time lapse camera
which can only be played back by removing the SD card to a computer.
The NAS and cloud storage is supported. You can record the video files into any
normal NAS devices or to your Dropbox account. And you can playback those
recorded video files remotely on your mobile devices or computers.
For day & night usage, there is an IR cut on the camera, IR filter is on for day
and off for night. The lens is wide angle up to 140 degree.
Two-way audio is supported. You can monitor the synchronized video/audio and
talk to or warn the people around the camera from your iPhone/iPad and Android once
you got the push notification. There is a built-in speaker so that you could connect any
high power speaker to the camera for your needs.
The WPS(WiFi Protected Setup) is supported. You could set up the WiFi
connection of the camera with the router by clicking the WPS button on the camera
and on the router at the same time. No more complicated WiFi configuration.
The IP camera is ideal for securing small businesses, home offices and
residences. The IP Camera is a perfect replacement of the alarm system in your house
and shop. .

Features
Full HD, video resolution 1920x1080 for 30 fps
Wide angle lens up to 120 degree(horizontal)
Plug & play by ID/password, no IP address or DNS settings.
H.264 video compression
IR cut for day and night usage.
Two way audio.
SD card video recording with 5 seconds of pre-recording..
Time lapse video recording
2.4GHz WiFi with WEP and WPA/WPA2 security support.
WPS (WiFi Protected Setup) support.
Triple video streaming on PC, mobile and SD card recording.
Night mode control –support automatic, manual and scheduled
modes.
Connect up to 8 users simultaneously
Bundle with free video management software CamView.
Push notification on iPhone/iPad and Android for motion and sound
detection.
Email/ftp alarm message for motion and sound detection.
Event scheduling.
Video recording on NAS device.
Cloud storage on Dropbox.
Internal real time clock
Watchdog function to prevent system failure.

Specifications
Models
Full HD IP camera
Power
DC 5V, 1.5A
Processors
RISC CPU, hardware video processing and compression.
Wireless interface
2.4G Hz WiFi
Range : 100 meters, line of sight
Image sensor
RGB 2 Mega 1/2.7 inch CMOS sensor
Automatic exposure control, automatic white balance,
automatic gain control, automatic brightness control.
Light sensitivity
0.2 Lux ( IR LED off )
0 Lux (with 10 meters IR LED on)
Automatically turn on the IR LED on low light
environment.
Lens
M12, 2.8 mm, F2.0, viewing angle- horizontal:120°,
fixed iris. focus range: 50 cm to infinity
Buttons
One reset button, to factory default settings
One WPS button for automatic WiFi setup
Indicators
One LED for Internet connection status indication
One LED for WiFi connection indication
One LED for SD card recording indication
Video compression
H.264, high profile
Video streaming
Separate frame rate/resolution/bandwidth settings
for PC and mobile.
Video settings
Resolution: (Full HD)1920x1080, 1280x720, 640x360
Bandwidth : 64k, 128k, 256k, 512k, 768k, 1M, 1.2M, 1.5M, 2M, 3M
bps
Frame rate : 1~5, 10, 15, 20, 25, 30 fps
Audio
Built-in microphone for audio monitoring
Built-in 0.5W speaker for alarm and half-duplex two-way
audio.
Audio compression: G.711
Security
Web management username/password protection
Video display ID/password protection

WiFi WEP and WPA/WPA2 security mode
Installation,
management and
maintenance
Plug & play by ID/password.
Video management software-CamView for video access
and multi-camera management
Firmware upgrades via FTP
Web browsing
Built-in web server for standard web browser access
Video display on IE browser
Video snapshot on any browser
Supported protocols
IPv4, HTTP, TCP, ICMP, RTSP, RTP, UDP, RTCP,
SMTP, SNTP, FTP, DHCP, ARP, DNS, PPPoE, etc.
Accessories (included)
Power adaptor, quick installation guide, ID/Password
card.
App
App mCamView2 for Android and iPhone
Users
Up to 8 simultaneous unicast users
(depends on video settings)
Alarm and event
management
Events triggered by motion and sound detection
Email/ftp alarm message
Push notification on iPhone/iPad and Android devices.
Dimensions (HxWxD)
and weight
102 x 76 x 68 mm, bracket included
101 g, incl. camera bracket, excl. power adaptor
Operating conditions
0-50 °C
Humidity 20 –80% RH (non-condensing)