State Water Heaters 200 Series User manual

State Select
®
gas water heaters feature an FVIR Compliant design, which
meets the ANSI Z21.10.1-CSA 4.1 standards for flammable vapor ignition
resistance. Select water heaters are available in a variety of heights
which can accommodate installations with limited space.
Diffuser Dip Tube
• Reduces lime and sediment buildup, maximizes hot water output
• Made from State PEXAN ™, a cross-linked polymer that can withstand
long-term exposure to temperatures up to 400ºF
Green Choice® Gas Burner
• Patented “Eco-Friendly” burner design reduces NOx emissions by up to 33%
and complies with 40 ng/j requirements for low NOx emissions.
Easy-to-Light Piezo Ignitor
• For fast “one-hand” pilot ignition
Glasslined Tank with Aluminum Anode Rod
• For long-lasting protection against build up and corrosion
Durable, Brass Tamper-Resistant Drain Valve
CSA Certified and ASME Rated T&P Relief Valve
Design-Listed by CSA International
• Certified at 300 PSI test pressure and 150 PSI working pressure
• Listed according to ANSI Z21.10.1 - CSA 4.1 standards governing storage-type water heaters
• Meets the Federal Energy Efficiency Standards effective January 20, 2004, according to
the National Appliance Energy Conservation Act (NAECA) of 1992 and meets the thermal
efficiency and standby loss requirements of the U.S. Department of Energy and current
editions of ASHRAE/IESNA 90.1.
• Additional code compliance: UBC, CEC, SBCC, CABO, HUD and BOCA National Codes
FVIR Compliant Design
6-Year Limited Tank and Parts Warranty
Consult written warranty or contact State Water Heaters for complete information
SELECT
®
Residential Gas Water Heaters
For more information on Select®contact:
State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015
800.365.0024 Toll-free USA
www.statewaterheaters.com
SRGSS02408
Simplifies Service
• Uses industry standard thermopile
• Burner operation may be viewed through new enlarged sight glass
RESIDENTIAL
Revised March 2011
300/301 Series
Low Lead Content
Intelligent Control Logic
• The internal microprocessor provides enhanced operating parameters and tighter differentials
for precise sensing and faster heating response to optimize performance.
Self-powered Electronic Gas Valve
• Uses a thermopile to generate the power needed to operate the electronic gas control without
requiring an external power source.
Diagnostics
• The electronic gas control incorporates an LED status indicator that monitors system
operation & service diagnostics.
234347_SRGSS02408.indd 1234347_SRGSS02408.indd 1 4/4/11 9:51 AM4/4/11 9:51 AM

For complete information on limited warranties, consult written warranty,
or contact the State Customer Care Center, 1-800-365-0024.
State Industries, Inc. reserves the right to make product changes or improvements without prior notice.
Recoveries are rounded to nearest gallon. For 10-Year Tank and 6-Year Parts Warranty, change "6" to "X" in Model Number (GSX40 YBRT).
Water Connections – 3/4" male on all models. When ordering Propane, change "Y" to "H" in model number (GS6 40 HBRT).
External heat trap nipples are factory-installed on all models.
† Propane Gas – 37,000 for 50-gallon models, 36,000 input for 40-gallon models
and 32,000 for 30-gallon models.
SELECT ®
Residential Gas Water Heaters
For more information on Select®contact:
State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015
800.365.0024 Toll-free USA
www.statewaterheaters.com
SRGSS02408
RESIDENTIAL
State FVIR design meets or exceeds the American National Standards Institute standards (ANSI Z21.10.1 - CSA 4.1) that deal with
the accidental or unintended ignition of flammable vapors, such as those emitted by gasoline.
Feature a sealed combustion chamber with air intake filter and a flame arrestor built into the water heater base. In addition, a thermal
cutoff (TCO) device, is designed to shut off gas flow to the burner and pilot if
poor combustion is detected.
Flammable Vapor Ignition Resistant (FVIR) Water Heaters
If flammable vapors accidentally enter the
combustion chamber, the arrestor is designed
so flames burn off the top surface and can not
escape down through the arrestor. A. Industry standard thermopile
B. Large View Port for easy burner inspection
C. 3600combustion air filter
D. Thermal Cutoff (TCO) with manual reset
Maximum Hydrostatic Working Pressure: 150 PSI.
When ordering top-mounted T&P Valve, add "G" to model number (GS6 40 YBRT G).
Propane (LP) models are Series 201
BTU INPUT RECOVERY
DRAFT SHIPPING PER HOUR 90°F RISE A B C D E F HOOD WEIGHT
NATURAL† GALLONS
OUTLET
(LBS)
DIMENSIONS IN INCHES
58-1/4 18 13 51-3/4 138
TALL MODELS
SHORT MODELS
1
PEAK
DEMAND
OUTPUT
(1st Hour
Rating
Gallons)
APPROX
ENERGY
FACTOR GALLON
CAPACITY
FOAM
THICK-
NESS
(Inches)
MODEL
NUMBER
20 13 8 50-1/4 3 or 4 153
60-3/4
14140,00050.58
88
GS6 50 YBRT 57
41 61-3/4
Revised March 2011
50
13635,50030.61
60
GS6 30 YORS
GS6 30 YORT
18 13-1/2 8
46-3/8 40 3 or 4 113
61-1/2
13635,50030.61
67 16 13 8
58 52 3 or 4 112
51-1/2
14140,00040.59
66
GS6 40 YBRS 20 13 8
47-3/4 41 3 or 4 135
Low Lead Content
300/301 Series
BA
F
D
1/2" GAS
CONNECTION
VALVE
C
COLD
CONNECTION
E
HOT
CONNECTION
ANODE ROD
(OPTIONAL T&P
LOCATION)
234347_SRGSS02408.indd 2234347_SRGSS02408.indd 2 4/4/11 9:51 AM4/4/11 9:51 AM