State Water Heaters PATRIOT User manual

COMMERCIAL
PATRIOT™
LIGHT-DUTY
COMMERCIAL ELECTRIC WATER HEATERS
Designed for use as recovery heaters for
light-duty hot water supply service.
Patriot™PCE water heaters are available
with tank capacities from 6 through 119
gallons. They can be installed for non-
simultaneous and single element operation
(maximum input up to 6 KW), or for
simultaneous dual-element operation
(maximum input up to 12 KW).
Zinc-Plated Copper Sheath
Heating Elements Standard
• Medium watt density design disperses
element temperature over larger
surface contact area to minimize scale
buildup, maximize efficiency and pro-
long element life
• Element options from 1.5 KW to 6
KW (non-simultaneous or simultane-
ous operation), recoveries from 6 gph
to 49 gph at 100°F rise
Standard Voltages for
Easy Installation
• 120V, 277V single-phase, and 208V,
240V and 480V unbalanced 3-phase
delta
• Easily converted to single-phase at ter-
minal block (except for 208V with
6000 watt elements
• Single-element heater, single-phase only
(see chart for dual-element options)
Factory-Installed
Terminal Block
• Provides electrical service to heater and
connects to block (excludes models 6-20)
Factory-Wired Controls
• Temperature control (adjustable from
110°F to 170°F on single-element;
120°F to 180°F on dual-element models)
• Manual reset high temperature cutoff
per element (dual-element models)
• Factory wired for non-simultaneous
operation; easily converted to simulta-
neous operation
Glasslined Tank with
Anode Rod
• Provides long-lasting protection against
corrosion
Maximum Hydrostatic Working
Pressure: 150 psi
Meets the standby loss
requirements of the U.S.
Department of Energy and
current edition of
ASHRAE/IESNA 90.1
Three-Year Limited Tank
Warranty
• Consult written warranty shipped with
water heater, or contact State for
complete information
Other Patriot™ PCE
Series Features
• CSA Certified and ASME rated T&P
relief valve is factory-installed
• Simplified, color-coded circuitry for
ease of service
• Bonderized undercoat on cabinet with
baked enamel finish
• Foam insulation
• Drain valve (not supplied for models 6-20)
• UL-approved field conversion program
• PCE models 6-20 are listed to UL
174 and PCE models 30-120 are listed to
UL 1453
For more information on State®contact:
State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015
800-365-0024 Toll-free USA
www.statewaterheaters.com
SCESS00106 Revised May 2012 Page 1 of 4 ©2012 State Water Heaters Company
LISTED
226261_SCESS00106.indd 1 6/23/10 2:58 PM
Low Lead Content

TANK CAPACITY, DIMENSIONS AND WEIGHTS
*Not available in PCE 10 10MSA, PCE 17 10MSA and PCE 30 20RTA.
**A6 non-simultaneous circuit only.
PCE 6 10MSA not available above 2500 W.
PCE 6 10MSA not available in 480V.
HEATING ELEMENT AVAILABILITY
1500
2000
2500
3000
3500
4000
4500
5000
5500
6000
INPUT
WATTS
YES
YES
YES
YES
NO
NO
NO
NO
NO
NO
120V
YES
YES
YES
YES
NO
YES
YES
YES*
NO
YES**
208V
YES
YES
YES
YES
YES
YES
YES
YES*
YES
YES
240V
YES
YES
YES
YES
NO
YES
YES
YES*
NO
YES
277V
NO
NO
YES
YES
NO
YES
YES
YES*
NO
YES
480V
WATTAGE, RECOVERY AND ELECTRICAL CHARACTERISTICS
SCESS00106 Revised May 2012 Page 2 of 4 ©2012 State Water Heaters Company
PRODUCT SPECIFICATIONS
Approx.
Models No. of Tank Capacity A B C D Shipping Weight.
Dimensions Elements US Gals. Litres inches mm inches mm inches mm inches mm Lbs. Kg.
PCE 6 1OMSA 1 6 23 15 1/2 394 14 1/4 362 11 279 - - 35 15.9
PCE 10 1OMSA 1 10 38 18 1/4 464 18 457 12 1/2 318 - - 54 24.5
PCE 17 OMSA 1 15 57 26 660 18 457 20 1/2 521 - - 58 26.3
PCE 20 1OMSA 1 20 76 22 1/4 565 21 3/4 552 15 3/8 391 - - 73 33.1
PCE 30 2OLSA 2 30 114 30 7/8 784 21 3/4 552 24 1/8 613 8 203 100 45.4
PCE 40 2OLSA 2 40 151 32 1/4 819 24 610 25 9/16 649 8 203 125 56.7
PCE 50 2OLSA 2 50 189 32 1/4 819 26 1/2 673 25 1/8 638 8 203 166 75.3
PCE 30 2ORTA 2 30 114 34 1/2 876 20 1/2 521 - - 8 203 98 44.5
PCE 40 2ORTA 2 40 151 45 1/8 1146 20 1/2 521 - - 8 203 113 51.3
PCE 52 2ORTA 2 50 189 54 7/8 1394 20 1/2 521 - - 8 203 131 59.4
PCE 66 2ORTA 2 66 250 60 3/4 1543 21 3/4 552 - - 8 203 176 79.8
PCE 82 2ORTA 2 80 303 59 3/8 1508 24 610 - - 8 203 211 95.7
PCE 120 2ORTA 2 119 450 62 7/16 1586 29 3/8 746 - - 8 203 326 147.9
DETACIDNIESIRERUTAREPMETtarH/sertiLdnarH/snollaG.S.UtnemelE
Wattage INPUT F°36F°40F°54F°60F°72F°80F°90F°100F°108F°120F°126F°
(Upper/Lower) KW C°20C°22.2C°30C°33.3C°40C°44.4C°50C°55.5C°60C°66.6C°70C°
NON-SIMULATANEOUS OPERATION
/1500 GPH171511108 8 7 6655
1.5 LPH 64 58 43 38 32 29 26 23 21 19 18
/2000 GPH232015141110 9 8 8 7 6
2.0 LPH 85 77 57 51 43 38 34 31 28 26 24
/2500 GPH28251917141311 109 8 8
2.5 LPH 107 96 71 64 53 48 43 38 36 32 30
3000/3000 GPH34302320171514 12111010
3.0 LPH 128 115 85 77 64 58 51 46 43 38 37
4000/4000 GPH45413027232018 16151413
4.0 LPH 170 153 114 102 85 77 68 61 57 51 49
4500/4500 GPH51463430252320 18171514
4.5 LPH 192 173 128 115 96 86 77 69 64 58 55
5000/5000 GPH56513834282523 20191716
5.0 LPH 213 192 142 128 107 96 85 77 71 64 61
6000/6000 GPH68614541343027 24232019
6.0 LPH 256 230 170 153 128 115 102 92 85 77 73
SIMULATANEOUS OPERATION
3000/3000 GPH 68 61 45 41 34 30 27 24 23 20 19
6 LPH 256 230 170 153 128 115 102 92 85 77 73
4000/4000 GPH 90 81 60 54 45 41 36 32 30 27 26
8 LPH 341 307 227 205 170 153 136 123 114 102 97
4500/4500 GPH101916861514641 36343029
9 LPH 384 345 256 230 192 173 153 138 128 115 110
5000/5000 GPH 113 101 75 68 56 51 45 41 38 34 32
10 LPH 426 384 284 256 213 192 170 153 142 128 122
6000/6000 GPH 135 122 90 81 68 61 54 49 45 41 39
12 LPH 511 460 341 307 256 230 205 184 170 153 146
Recovery capacities at 100°F rise equal: for non-simultaneous element operation = 4.1 gal. x KW of one element; for simultaneous element operation
= 4.1 gal. x 2/3 KW of both elements. For other rises multiply element KW as previously explained by 410 and divide by temperature rise. Full load current for single phase
= total watts : voltage.
226261_SCESS00106.indd 2 6/23/10 2:58 PM

SCESS00106 Revised May 2012 Page 3 of 4 ©2012 State Water Heaters Company
TOP VIEW
PCE 6 10MSA, PCE 10 10MSA
PCE 17 10MSA, PCE 20 10MSA
FRONT VIEW
PCE 6 10MSA, PCE 10 10MSA
PCE 17 10MSA, PCE 20 10MSA
B
C
A
OUTLET
3/4"(FEMALE)
NPT*
ALTERNATE OUTLET
3/4" (FEMALE) NPT
3/4" NPT
RELIEF VALVE
OPENING
ELECTRICAL
CONNECTION
INLET
3/4" (FEMALE)
NPT
INLET
3/4" (FEMALE)
NPT
TOP VIEW
PCE 30 20LSA, PCE 40 20LSA,
PCE 50 20LSA
JUNCTION
BOX
2 1/2"
OUTLET
3/4" (FEMALE)
NPT
3/4" NPT
RELIEF VALVE
OPENING
BRASS
DRAIN
VALVE
“B”
“C” “A”
3 3/4"
FRONT VIEW
PCE 30 20LSA, PCE 40 20LSA,
PCE 50 20LSA
OUTLET
3/4" (FEMALE)
NPT
JUNCTION
BOX TOP VIEW
3/4" NPT
RELIEF VALVE
OPENING
2 1/2"
INLET
3/4" (FEMALE)
NPT
FRONT VIEW
PCE 30 20RTA – PCE 120 20RTA
3 3/4"
DRAIN
VALVE
“D”“D”
“A”
“B”
226261_SCESS00106.indd 3 6/23/10 2:58 PM

COMMERCIAL
SUGGESTED SPECIFICATION
The water heater(s) shall be State Patriot™ Model(s) ________, rated at _______ KW, _______ volts, _______ -phase, 60
cycle AC. Water heater(s) shall be listed by Underwriters Laboratories and meets the thermal efficiency and standby loss requirements
of the U.S. Department of Energy and current edition of ASHRAE/IESNA 90.1 and shall be ________ gallon capacity with a
recovery capacity of ______ GPH at a temperature rise of ______°F with ______/______ upper/lower element wattage.
Heater(s) shall have 150 psi working pressure and be equipped with extruded high-density anode rod. All internal
surfaces of the heater(s) exposed to water shall be glasslined with an alkaline borosilicate composition that has been fused to
steel by firing at a temperature of 1600°F. Electric heating elements shall be medium watt density with zinc-plated copper sheath
or Incoloy sheath _______________. CSA Certified and ASME rated T&P Relief valve is factory-installed.
Each element shall be controlled by an individually mounted thermostat and high-temperature cutoff switch. The outer jacket
shall be a baked enamel finish and provided with a full-size control compartment for performance of service and maintenance
through a hinged front panel and shall enclose the tank with foam insulation.
Electrical junction box with heavy-duty terminal block shall be provided (except on 120V and 277V [no junction box on
PCE 6 10MSA thru PCE 20 10 MSA]). The drain valve shall be located in the front for ease of servicing. Heater tank shall
have a 3-year limited warranty as outlined in the written warranty. Fully illustrated instruction manual will be included.
For more information on State®contact:
State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015
800-365-0024 Toll-free USA
www.statewaterheaters.com
SCESS00106 Revised May 2012 Page 4 of 4 ©2012 State Water Heaters Company
226261_SCESS00106.indd 4 6/23/10 2:58 PM