Stealth Cam PX Pro Series User manual

PX Pro Series
Instruction Manual
V6

Page 2
To ensure the product is being utilized to its full potential, we recommend checking
our website for new product updates. If your camera is having an issue, please check
our website to determine you are using the latest rmware or software version.
Notice
TECHNICAL SUPPORT
EMAIL:
[email protected]
Please allow 48 hours for email
response.
GSM, LLC
P.O. Box 535189
Grand Prairie, TX 75053-9504
CUSTOMER SERVICE
CONTACT & HOURS
Toll Free: 877-269-8490
CALL CENTER HOURS
Mon – Fri / 8 AM – 5 PM (CST)
WEBSITE
www.stealthcam.com
Contact Us

Page 3
Table of Contents
About Your Camera 4
Quick Setup Guide 5
Camera Overview 6
Camera Setup 7
Camera Conguration 8
Camera Conguration. 10
Viewing and Deleting Images 13
Frequently Asked Questions 14
Camera Care 15
Limited Warranty Information 16

Page 4
About Your Camera
60 Foot Detection and Flash Range
See farther with long-distance PIR sensor and LEDs.
0.8 Second Trigger Speed
Never miss a shot with lightning fast 0.8 second trigger
speed.
Quick Set Options
Set up in seconds with pre-programmed options.
Burst Rapid-Fire Mode
Rapid-re Burst Mode, multiple exposures per triggering.
32 IR LEDs
Perfectly illuminate your nighttime photos with 32 IR LED
lights.

Page 5
Quick Setup Guide
Insert Batteries and SD Card
Install 8 AA batteries and a class 10 SD card into camera.
Mount Camera
Mount the camera at the desired location using the strap
mount, Python Lock cable, Articulating Ball Joint Mount, or
other desired mounting mechanism. Position the camera so
that it faces North or South
Activate Camera
Set camera to desired Quick Set (QSET) or to custom
conguration and place in desired vantage point to start
capturing photos of game.

Page 6
Camera Overview
Universal
¼ - 20 Thread
Menu
EnterUpDown
Power Switch

Page 7
Camera Setup
Battery Installation
To remove the batteries; open the case to see plastic door covering
inlaid battery tray. First, remove plastic battery door. Once exposed,
insert 8 AA batteries, ensuring that orientation matches markings
placed on plastic. Once batteries are properly installed, simply
replace battery door back to original position.
SD Card Installation
The SD card slot is located on the
left side of the camera. With the
camera open, insert SD card with
the label facing you. Only minimal
resistance should be felt as card is
inserted and a click when the card
is fully inserted.

Page 8
Camera Conguration
This camera features 3 Modes of operation (OFF |
TEST | ON) and 6 distinct Quick Set (QSET) options.
OFF – This position completely powers down the unit.
ON – This position turns the unit ON allowing it to
capture images/videos based on the operational mode
the unit is set. The unit will automatically enter Date &
Time menus on initial startup.
Name Type Quality Timeout
Delay Detail
QSET 1 Photo Low 30 sec 3 Photos
QSET 2 Photo High 30 sec 1 Photo
QSET 3 Video 720P 30 sec 10 sec video
QSET 4 Photo Medium 5 sec 3 Photos
QSET 5 Photo Medium 90 sec 2 Photos
QSET 6 Video 720P 5 sec 15 sec video
TEST – This is the nal switch setting, and is used to determine the camera’s
PIR sensor coverage area. When moved to this setting the display will display
TEST. Simply walk back and forth in front of the camera, the light will illuminate
green when you have passed into the coverage area.
See table for breakdown of Quick Set modes.
• While ON the unit will remember the last set operational mode.
• Pressing the UP and DOWN button cycles the available modes
respectively. (Qset1 / Qset2 / Qset3 / Qset4 / Qset5 / Qset6 / Custom)

Page 9
Custom Conguration
The CUSTOM setting on your camera allows you to customize every
setting to t your exact needs. To begin, press the Up or Down arrows
until CUSTOM is displayed on the camera, and then press Enter.
Once inside the custom settings menu, use the Up and Down arrows to
scroll through the di󰀨erent settings. To change a setting that is displayed,
press the Enter key and the setting will begin ashing. At this point use
the Up and Down arrows to change the setting. When nished press the
Enter button to save the change or press Menu to cancel change.
When you are nished conguring your camera’s settings, press the
Menu button to return your camera to an active state.

Page 10
OPERATION MODE: This setting will change the
operation mode of the camera. Di󰀨erent operation
modes will have di󰀨erent adjustment settings.
OPTIONS: PIR Photo | PIR Video | Time Lapse
DATE: This setting is used by the camera to
display the correct date on the Info Bar of the
image.
TIME: This setting is used by the camera to display
the correct time on the Info Bar of the image.
Camera Conguration.
RESET: Selecting “Yes” on this option will reset
every setting back to the default conguration.
Selecting “Yes” will completely wipe your custom
conguration.
OPTIONS: Yes | No
DELETE CARD: Selecting “Yes” on this setting
will completely format the SD card inserted
into the camera. Formatting an SD card will
completely erase any data present on the card. It
is recommended to format an SD card before use
inside a camera.
OPTIONS: Yes | No
NAME: This setting will allow you to customize the
name of your camera.
TIME ZONE This setting allows you to set your
camera to di󰀨erent time zones.
OPTIONS:
Eastern | Central | Mountain | Pacic | Alaskan
| Hawaiian
OPERATING HOURS: This option is available for
PIR PHOTO and PIR Video settings. This feature
allows you to designate a time for the camera to
be active.
OPTIONS:
24/7: Camera is always on.
SCHEDULED: Selecting this will allow you to
enter a time range for the camera to be active
and operational. Camera will not take photos
outside of dened time range.
START TIME (HH:MM): Start time for camera
to be active.
END TIME (HH:MM): Time at which you want
the camera to no longer be operational.
TEMPERATURE: This setting is used to change
temperature format on Info Bar.
OPTIONS: Farhenheit | Celsius
RESET: Selecting “Yes” on this option will reset
every setting back to the default conguration.
Selecting “Yes” will completely wipe your custom
conguration.
OPTIONS: Yes | No

Page 11
VIDEO LENGTH: This setting is used to determine
the length of time, in seconds, of a video recording
OPTIONS: 5 sec | 10 sec | 15 sec | 20 sec
30 sec | 60 sec | 120 sec
PIR Video Settings
PIR DELAY: This setting is used to determine how
long the camera will wait before reinitializing the
PIR sensor after taking a Video.
OPTIONS: 5 sec | 10 sec | 15 sec | 20 sec |
30 sec | 60 sec | 120 sec
RESOLUTION: This setting will determine the
quality of each video. A higher quality will result in
better videos and take more memory space.
OPTIONS: High | Low
AUDIO: This setting will determine if the video
records with or without audio. Recording audio with
each video will take additional memory space.
OPTIONS: O󰀨 | On
PHOTO BURST: This setting determines how
many photos are taken each time the camera is
activated.
OPTIONS: 1 photo – 6 photos
PIR DELAY: This setting is used to determine how
long the camera will wait before reinitializing the
PIR sensor after taking a photo.
OPTIONS: 5 sec | 10 sec | 15 sec | 20 sec |
30 sec | 60 sec | 120 sec
RESOLUTION: This setting will determine the
quality of each image. A higher quality will result in
better photos and take more memory space.
OPTIONS: High | Med | Low
PIR Photo Settings
BLUR REDUCTION: This setting is used to
determine if the camera should use the MATRIX
Blur technology to dramatically reduce the blur
e󰀨ect, resulting in more clear night time infrared
shots.
OPTIONS:
STANDARD: Minimize blurring e󰀨ect in
images while retaining long-range night image
capability.
ADVANCED: Enhanced blur reduction
providing a balance between brightness and
image sharpness.

Page 12
PHOTO BURST: This setting determines how
many photos are taken each time the camera is
activated.
OPTIONS: 1 photo – 6 photos
PIR DELAY: This setting is used to determine how
long the camera will wait before reinitializing the
PIR sensor after taking a photo.
OPTIONS: 5 sec | 10 sec | 15 sec | 20 sec |
30 sec | 60 sec | 120 sec
RESOLUTION: This setting will determine the
quality of each image. A higher quality will result in
better photos and take more memory space.
OPTIONS: High | Med | Low
Time Lapse Settings
BLUR REDUCTION: This setting is used to
determine if the camera should use the MATRIX
Blur technology to dramatically reduce the blur
e󰀨ect, resulting in more clear night time infrared
shots.
OPTIONS:
STANDARD: Minimize blurring e󰀨ect in
images while retaining long-range night image
capability.
ADVANCED: Enhanced blur reduction
providing a balance between brightness and
image sharpness.
TIME LAPSE (TL) DELAY: This setting will adjust
the length of time between each photo taken
during the time lapse.
OPTIONS: 5s | 10s | 15s | 20s | 30s | 1 min |
5 min | 10 min | 15 min | 30 min | 60 min
TL STARTUP: This setting is used to determine
the start time of the time lapse.
TL STOP: This setting is used to determine the
end time of the time lapse.

Page 13
There are a few methods for viewing and deleting your les.
i. Using an SD Memory Card Reader/Viewer: You will simply
need to remove the SD card from the camera and insert it into
the reader to view the les; you can also delete them from this
device.
ii. Using your computer: This method requires an SD card slot to
be installed to your computer. Please refer to your computer’s
Owner’s Manual for the proper way of viewing the les.
iii. Obtain a mobile device adapter: This will allow you to plug one
end into the device, and, at the other end, insert the SD card.
Please refer to the vendor’s User Manual for the proper way of
viewing the les.
Viewing and Deleting Images

Page 14
Frequently Asked Questions
Q: Will I lose my images and settings if the batteries die?
A: You will lose your settings but not your images. The images are stored on your
external SD memory card so your images will be intact only on your card.
Q: Why is my camera taking pictures with nothing in front of it?
A: This camera is powered by motion activation. This can cause objects, like a tree
branch or moving water, within the camera frame to cause the camera to take a photo.
Q: Is there a warranty that comes with my camera or an extended warranty I can
purchase?
A: Your Stealth Cam Camera comes with a Limited 1-year warranty. Please contact
support at 1.877.269.8490 for more information.
Q: Can I mix batteries together?
A: No, you should never mix batteries. After your camera batteries die, always install
brand new batteries in your camera.
Q: Can I use rechargeable batteries in the camera?
A: Rechargeable batteries can be used but will cause battery percentage to be report-
ed incorrectly.

Page 15
Camera Care
Operating Conditions
This camera is designed to function in 14°F – 104°F (-10°C -
40°C) 20%-85% relative humidity, non-condensing.
Product Care
• When not in use, store camera in a cool, dust-free, environment.
• Handle camera with care.
• Camera is weather resistant only. Do not fully submerge camera in
water or other liquid. Doing so will void camera warranty.
• Only use same type of batteries to power camera. Do not mix old
and new batteries.
• Do not touch camera lens directly. Clean only with soft lens cloth.
• Use damp cloth to clean. DO NOT submerge camera.
• Remove batteries when camera is not in use for an extended time.
• Do not open camera housing to access internal parts. Doing so
could damage camera and void warranty.
Notice
Camera is an active electronic device. Attempting to service
internal parts may expose you to dangerous voltages and
other risks.

Page 16
Your Stealth Cam Trail Camera is covered by a 365 Day Limited Warranty on
parts and labor from the date of original purchase, and purchases must be made
through an authorized dealer. The warranty covers defects in workmanship and
materials. The warranty does not apply to units which have been damaged or
abused intentionally or unintentionally. A purchase from individuals or unauthorized
Internet sites such as eBay voids the warranty. Tampering with or altering the unit
will void the warranty. Any unauthorized service will void warranty. A copy of your
original sales receipt must be produced for any warranty service and a Return
Authorization (RA) number must be obtained from customer service at 877-
269-8490 prior to returning product. Stealth Cam is not responsible for any lost
untraceable packages or those without a Return Authorization at the time of return.
Limited Warranty Information

PX Pro Series
Manuel d’instuction

Page 18
Pour vous assurer que le produit est utilisé à son plein potentiel, nous vous recom-
mandons de consulter notre site Web pour les nouvelles mises à jour du produit. Si
votre appareil photo rencontre un problème, veuillez consulter notre site Web pour
déterminer si vous utilisez la dernière version du micrologiciel ou du logiciel.
Remarquer
SOUTIEN TECHNIQUE
EMAIL:
[email protected]
Veuillez prévoir 48 heures pour le
courrier électronique
réponse.
GSM, LLC
P.O. Box 535189
Grand Prairie, TX 75053-9504
SERVICE CLIENTS
CONTACT & HEURES
Sans frais: 877-269-8490
HEURES DU CENTRE D’APPELS
Lun - ven / 8h - 17h (CST)
SITE INTERNET
www.stealthcam.com
Nous contacter

Page 19
Table of Contents
À propos de votre appareil photo 20
Guide d’installation rapide 21
Présentation de la caméra 23
Conguration de la caméra 24
Conguration de la caméra 25
Conguration de la caméra 27
A󰀩chage et suppression d’images 29
Questions fréquemment posées 30
Salle de soins 31
Informations sur la garantie limitée 32

Page 20
À propos de votre appareil photo
Détection de 60 pieds et portée du ash
Voir plus loin avec le capteur PIR longue distance et les LED.
Vitesse de déclenchement de 0,8 seconde
Ne manquez jamais un tir avec une vitesse de déclenche-
ment ultra rapide de 0,8 seconde.
Options de réglage rapide
Installation en quelques secondes avec des options prépro-
grammées.
Mode de tir rapide en rafale
Mode rafale à tir rapide, expositions multiples par déclenche-
ment.
18 IR LEDs
Illuminez parfaitement vos photos de nuit avec 18 lumières
LED IR.