Stealth Cam STC-DVSIR5 Prowler DVS User manual

STC-DVSIR5 Prowler DVS
User’s Manual
Toll Free Customer Support 1-877-269-8490
www.stealth am.net
Version 1.0 11/07
All manuals and user guides at all-guides.com
all-guides.com

STC-DVSIR5 Prowler DVS
www.stealthcam.net Toll Free 877- 69-8490 2
For Customer Servi e or Warranty Information Call Toll Free
877-269-8490
Stealth Cam, LLC
P.O. Box 539504
Grand Prairie, TX 75053-9504
www.steatlhcam.net
Stealth Cam Limited Warranty
Your Stealth Cam scouting camera is covered by a 90 days Limited Warranty
on parts and labor from the date of original purchase, and purchases must be
made through an authorized dealer. The warranty covers defects in
workmanship and materials. The warranty does not apply to units, which have
been damaged or abused intentionally or unintentionally. A purchase from
individuals or unauthorized internet sites voids the warranty.
Tampering with or altering the unit will void the warranty. Any unauthorized
service will void warranty. Original sales receipt must be produced for any
warranty service and a Return Authorization (RA) number must be obtained
from customer service at 877- 69-8490 prior to returning product.
All manuals and user guides at all-guides.com

STC-DVSIR5 Prowler DVS
www.stealthcam.net Toll Free 877- 69-8490 3
Manual Contents
Camera overview 4
Camera kit contents 8
Battery and memory Installation 9
Set up and programming 1
Camera use 0
Mounting the camera 1
Viewing & Deleting images 7
Memory compatibility chart 36
Technical Specs 37
General Information 41
Moon phase chart 43
All manuals and user guides at all-guides.com

STC-DVSIR5 Prowler DVS
www.stealthcam.net Toll Free 877- 69-8490 4
Camera overview
Front housing image with major parts indication.
All manuals and user guides at all-guides.com

STC-DVSIR5 Prowler DVS
www.stealthcam.net Toll Free 877- 69-8490 5
Open view image with major parts indication
All manuals and user guides at all-guides.com

STC-DVSIR5 Prowler DVS
www.stealthcam.net Toll Free 877- 69-8490 6
Side view with major parts indication
All manuals and user guides at all-guides.com
all-guides.com

STC-DVSIR5 Prowler DVS
www.stealthcam.net Toll Free 877- 69-8490 7
Pi ture / Image Capa ity
High Low Base AVI
(in seconds)
SD card
Color B&W Color B&W Color B&W Color B&W
16MB
16 53 3 80 80 160 40s 45s
3 MB
3 106 64 160 160 3 0 80s 90s
64MB
64 1 1 8 3 0 3 0 640 160s 180s
1 8MB
1 8 4 4 56 640 640 1 80 3 0s 360s
56MB
56 848 51 1 80 1 80 560 640s 7 0s
51 MB
51 1696 10 4 560 560 51 0 10 4s 1440s
1 GB
10 4 339 048 51 0 51 0 10 40 048s 880s
GB
048 6784 4096 10 40 10 40 0480 4096s 5760s
NOTE: Picture / Image Capacity Chart provides approximate number of
images or AVI movies based on resolution setting and the size of
memory card. These figures may vary depending on the amount of
detail in the image.
All manuals and user guides at all-guides.com

STC-DVSIR5 Prowler DVS
www.stealthcam.net Toll Free 877- 69-8490 8
Camera kit ontents
• Model STC-DVSIR5 PROWLER DVS Digital Scouting Camera
• CDROM (Contains Ulead Photo Explorer 8.0 and camera
driver)
• User Manual.
• USB cable.
• TV out cable for TV (RCA Jack).
• TV out cable for handheld TV (Mini Jack).
• Strap.
All manuals and user guides at all-guides.com

STC-DVSIR5 Prowler DVS
www.stealthcam.net Toll Free 877- 69-8490 9
Battery & memory installation
The Stealth Cam STC-DVSIR5 PROWLER DVS Advanced Digital
Scouting Camera is designed to operate using two different types
of battery power options.
NOTE: Always have camera in the OFF position when installing or
removing batteries. Removing battery while the camera is in
operation may damage the camera.
Batteries “C” ell
The internal battery compartment accepts 6 “C” cell batteries. Be
sure to use high quality brand name alkaline batteries. Install
batteries with correct polarity (+/-) as noted inside the battery
compartment.
Warning:
Do not use different Voltage lead
acid battery other than the one specified in
this section. Doing so will damage the camera
and will void the warranty.
All manuals and user guides at all-guides.com

STC-DVSIR5 Prowler DVS
www.stealthcam.net Toll Free 877- 69-8490 10
12V Lead A id external battery
The STC-DVSIR5 PROWLER DVS is equipped with an external
power jack designed to accept a barrel plug cable to attach to a
sealed lead acid battery. (sold separately). Battery cable and
complete 1 V Lead Acid battery kits are available wherever Stealth
Cam scouting cameras are sold or call toll free 877- 69-8490. Only
Stealth Cam external battery accessories are recommended.
• Insert the external battery barrel plug into the DC 1 V jack on
the bottom of camera housing
• Turn the camera power on.
 Please make sure the voltage and polarity ( /-) are correct
before connection. Incorrect voltage or polarity ( /-) will
damage the camera.
Memory Options
Your STC-DVSIR5 PROWLER DVS camera is equipped with
3 MB built in flash memory. The camera is also equipped with
an expandable media card slot capable of accepting up to GB
SD card (sold separately). With no memory card inserted into the
All manuals and user guides at all-guides.com

STC-DVSIR5 Prowler DVS
www.stealthcam.net Toll Free 877- 69-8490 11
slot, the camera will use the built in 3 MB memory. If an SD card
is inserted into the slot then the camera will bypass the built in
memory and utilize the SD memory. The front counter display will
show the number of images on the built in memory unless the
expansion card is inserted at which point the counter will only
show the number of images in the expansion card.
Inserting SD ard
Make sure camera is in the OFF position whenever adding or
removing memory.
• Insert SD memory card in to the SD card slot completely and in
the correct direction as shown by the sticker located at the side
of the housing.
• To remove the SD memory card, depress the SD card and pull
out the card gently.
 SD cards must be clean (no images from other sources). If
you are using the SD card from other cameras, please
make sure to format the SD card in your computer using
FAT formatting, not FAT32, prior to use in the STC-DVSIR5.
New cards are good to use straight from the package.
All manuals and user guides at all-guides.com
all-guides.com

STC-DVSIR5 Prowler DVS
www.stealthcam.net Toll Free 877- 69-8490 12
Set up and Programming
When the camera is first turned on the internal LCD screen displays
the camera status. The following information is present on this screen.
 If no buttons are pressed after 30 seconds the LCD screen
will power down to conserve battery life and enter 1
minute count down to enter PIR detection mode. To re-
power the display screen press and hold the UP or DOWN
button for at least 5 seconds.
All manuals and user guides at all-guides.com

STC-DVSIR5 Prowler DVS
www.stealthcam.net Toll Free 877- 69-8490 13
Definition
• Time out: To set the amount of time in minutes the camera will
sleep between PIR triggering.
• Capture mode:
o 1P ~ 9P: 1 to 9 burst mode image capturing per PIR
triggering.
o Video: 5 to 90 seconds adjustable video per PIR triggering.
• Resolution:
 Color Day time
o 5.0M : Select this option to capture a 5.0M pixels image.
(High image quality)
o 3.0M : Select this option to capture a 3.0M pixels image.
(Low image quality)
o 1.3M : Select this option to capture a 1.3M pixels image.
(Base image quality)
o Video resolution (640 x 480): This is the resolution during
video capturing.
All manuals and user guides at all-guides.com

STC-DVSIR5 Prowler DVS
www.stealthcam.net Toll Free 877- 69-8490 14
 B&W Night time
o 2.0M : Select this option to capture a .0M pixels image.
(High image quality)
o 1.3M : Select this option to capture a 1.3M pixels image.
(Low image quality)
o 0.3M : Select this option to capture a 0.3M pixels image.
(Base image quality)
o Video resolution (640 x 480): This is the resolution during
video capturing.
• Batteries Status: It shows the battery status.
o Full: It shows the battery is full.
o Low: It shows the battery is low and front Low Battery
indicator will also blink.
 When the camera has detected low batteries, (Batteries are
lower then 6.0 /-0.2Volts) the camera unit will power off
within 30 seconds automatically. Please replace with new
batteries; otherwise the camera will not work properly.
All manuals and user guides at all-guides.com

STC-DVSIR5 Prowler DVS
www.stealthcam.net Toll Free 877- 69-8490 15
• Day and Time: It shows the date and time that you have set.
• Moon phase and Temperature: It shows the moon phase and
temperature.
This information appears on the bottom of ea h still images as
well as AVI lip.
All manuals and user guides at all-guides.com

STC-DVSIR5 Prowler DVS
www.stealthcam.net Toll Free 877- 69-8490 16
Programming the Stealth Cam STC-DVSIR5 PROWLER DVS
Switch the camera to the ON position. LCD screen will display the
camera status screen. Press the MENU button within 30 seconds to
enter programming mode.
If MENU button is not pressed within 30 seconds, camera will
automatically enter PIR detection mode.
Set the Resolution: The first program setting is resolution.
• Press [OK] button to choose the selection
• Press the [UP] or [DN] button to select the desired resolution
(HIGH/LOW/BASE) and press [OK] to save and exit to
CAPTURING setting
Set the Capturing sequen e. The Stealth Cam STC-DVSIR5
PROWLER DVS can be programmed to shoot 1~9 pictures per
triggering.
• The number of burst mode next to the word CAMERA will be
blinking
• Press [OK] button to choose this selection and then press the
[UP] or [DN] button to select the desired burst mode setting
All manuals and user guides at all-guides.com
all-guides.com

STC-DVSIR5 Prowler DVS
www.stealthcam.net Toll Free 877- 69-8490 17
(number of pictures per triggering).
• Press [OK] to confirm your selection and exit to TIME OUT
settings.
Set the Video Mode: The Stealth Cam STC-DVSIR5 PROWLER DVS
can be programmed to shoot 5~90 seconds of video per triggering.
• After Pressing the Menu button, Press [UP] button twice to
enter video setting mode. The video length in seconds will be
blinking. Press [OK] to enter the setting mode.
• Press [UP] or [DN] button to select the desired video length
(from 5 seconds to 90 seconds in 5 seconds increment)
• Press [OK] to save and exit to TIME OUT setting.
Set the Time out:
• The time out time will be blinking
• Press [OK] button to choose the selection. Press [UP] or [DN]
button to increase or decrease the time value in minutes from
01 to 59 minutes.
• Press [OK] to save the setting and exit to Date & Time setting.
All manuals and user guides at all-guides.com

STC-DVSIR5 Prowler DVS
www.stealthcam.net Toll Free 877- 69-8490 18
Set Date and Time: This amera uses the 24hr military time
format.
• The date and time digit will be blinking. Press [OK] one more
time to enter time setting first.
• Minute digit will be blinking. Press [UP] or [DN] to increase or
decrease the minute value (0 – 59)
• Press [OK] to confirm the minute setting and enter hours
setting.
• Hour digit will be blinking. Press [UP] or [DN] to increase or
decrease the hour value (00 – 3)
• Press [OK] to confirm the hour setting and enter year setting.
• Year digit will be blinking. Press [UP] or [DN] to increase or
decrease the year value. Once this is done, press [OK] and
enter month setting.
• Month digit will be blinking. Press [UP] or [DN] to increase or
decrease the date value. (01 – 1 )
• Press [OK] to confirm the month setting and enter date setting.
All manuals and user guides at all-guides.com

STC-DVSIR5 Prowler DVS
www.stealthcam.net Toll Free 877- 69-8490 19
• Date digit will be blinking. Press [UP] or [DN] to increase or
decrease the date value. (1 – 31) Once this is done, press [OK].
You’ll see the word {No-dL} blink. Now press [MENU] to exit
program setting and back to status screen.
All manuals and user guides at all-guides.com

STC-DVSIR5 Prowler DVS
www.stealthcam.net Toll Free 877- 69-8490 20
Using the amera
Once all program setting has been completed your Stealth Cam is
ready for field use.
Getting started
It is recommended that you mount the camera 4-5 ft off the ground
with the camera pointed at a slight downward angle. Be sure to avoid
mounting the camera facing east or west as the rising and setting of
the sun could produce false triggers and overexposed images. Clear
all branches and other debris away from the front of the camera so
as not to block the camera lens or PIR sensor.
PIR Coverage Area
Diagram
All manuals and user guides at all-guides.com