Stealth STL-HHS User manual

Your Electronic
Lock is
currently set
with the default
combination of:
1-2-3-4-1-2
MODEL: STL-HHS
Step 2: Remove battery cover
• Located on the upper right
interior wall
Step 1: Twist key LEFT (counter-
clockwise) to open door
• Door will spring open
Step 4: Snap battery cover
back into place
IMPORTANT!
Test your new combination several
times with the door open to ensure
new combination is properly set before
closing and locking safe.
Step 5: Press change combination
button next to interior light
Step 6: Input your new 6 digit
combination
• Lock will beep, click, & light
will turn on
To activate OR deactivate silent
mode, press the COMBINATION
CHANGE BUTTON SIX TIMES
(See Step 5)
Step 3: Slide a 9V battery into
battery slot
OPEN:
CHANGE YOUR COMBINATION:
SILENT MODE:
INSERT BATTERY:
Electronic Lock
Instructions
1 2 3 4
RECORDNEWCOMBINATIONHERE:
Step 1
Step 2 Step 3
Step 4
Step 5
Your new combination is now
installed.

Handgun Hanger Safe Security Cable Instructions
Step 1: Wrap cable around a secure object
and insert lock through the loop on the
other end of the cable.
Step 2: Make sure bolt is in unlocked
position. Insert locking bolt into hole located
at the rear of the safe.
Step 3: Twist key to the RIGHT
(clockwise) to lock cable in place.
Remove key.
Your security cable is now installed.
*To unhook cable, insert key and
twist to the LEFT (counter-clockwise).
Remove lock.
Security
Cable Hole
Step 1
Unlocked
Key will only release while locked.
Locked
Step 2
Step 3